Classic Chevy Full Interior Upgrade | TMI | 1967-1972 C10 Install

[@CJClassicTrucks]

TMI Pro Sport Bench: www.cjponyparts.com/tmi-pro-sport-bench-seat-60-wide-plaid/p/SEAT348-V/ TMI Molded Door Panels: www.cjponyparts.com/tmi-molded-door-panel-pair-plaid-chevrolet-c10-1967-1972/p/DPD105-V/ TMI Dash Pad: www.cjponyparts.com/tmi-dash-pad-sport-black-chevrolet-c10-1967-1972/p/PAD36-V/

[@ottzu6600]

What was that sterring wheel just curious I want to install a smaller one on my 72 chevy c20

[@handyman68]

Install clip on handle then just push handle on. Much easier!

[@CJClassicTrucks]

Thank you for the tip

[@nerradnosnhoj5122]

Exactly ,

[@hackertheslacker]

Also the clips easily remove with a shop rag. They don’t fall to the ground and hook into the rag. No tool needed.

[@Road_Rash]

I definitely want to look into one of these full interiors from TMI when I get there...hope they come out with something in green soon...gonna be another year or 2, but it's coming...🖖🏿😎👍🏿

[@hra3909]

Seats are great...dash pad, best of luck. It is not easy to install. I am on my second dash as the first they claimed was defective...still not installed an trouble tickets opened.

[@Road_Rash]

My plans have changed since I made that post...TMI is too 'cookie cutter'...you look at a truck & see this in there, you know where it came from...too few options too... since I got my welder going, I can just go to a salvage yard, pick any seats I like, reupholster them however I want & build my own custom frame so they fit correctly... pretty sure since I can both weld & sew, I can put together a decent looking, unique interior for less money if I put my mind to it...

[@trevorb7645]

Damn..those seats look incredible. I love how they fit the cab

[@CJClassicTrucks]

Yeah they do. I was also super happy when I installed how it matched the truck so well.

[@trevorb7645]

@@CJClassicTrucks the way the seats hug the cab and integrate into the door panels..Its tremendous. A similar kit for first gen S10 would be killer

[@evanhall19]

Just got our bench in the mail! Its so nice! The bracket that mounts it to the floor only has one bolt per corner instead of the factory two

[@CJClassicTrucks]

yeah the bench is super nice and comfortable. correct the new bracket only uses 4 holes which is perfectly fine.

[@rf4215]

@@CJClassicTrucks Is it?

[@davidthomas2941]

That interior was🔥🔥🔥... I think I will be coming to you guys to do my interior on my 85 Monte Carlo...

[@OscarSantaCruz-v6e]

Nice seats

[@ottzu6600]

I need to do this to my 1972 c20 chevy it make a world of a diffrence

[@CJClassicTrucks]

yes you do :)

[@hra3909]

I purchased the TMI C10 Dash Pad from CJ Pony Parts...I was told to watch this video on how to install, including the one on CJ Pony Parts website. The studs on the first pad were off about 1/8 to 1/4 of inch from the holes on my dash. The videos make it appear as if it is a simple installation but I ended up jacking up my paint job on my dash as the studs never reached and the "pushing" that is required never helped. I pushed my body weight against my TMI Seats but no luck. I paid to have someone repair my dash. CJ Pony Parts sent me a replacement as they believe the previous one was defective. This week, I received it and tried to install...same exact result. Destroyed my paint on my dash and was told "It looks so simple on the videos." I have not received a solution...I want the dash pad, as I have the seats and console to match. Any suggestions? Will I have to resort to drilling bigger holes? Please advise...I am curious what modifications were done to make it fit.

[@blazerkconvertible]

awesome c10 truck

[@tyhobbs17]

The TMI interiors look amazing, but do they need cost more than a decent condition C10?

[@itscactus1525]

Its a new version if pimp my ride i own a 2000 s10 im putting my submission in im currently rebuilding a v6 plan on v6 single turbo with a awd transfer case and a 4x4 rear end so ts awd :)

[@matt_1969ChevyC1o]

Hey Brendan, I'm 6'2 and wondering if we're close the same height. I'm hoping the TMI seats are low enough to not knock my head when I get in the truck. Awesome video.

[@briandriedger1221]

The 1972 C10 has longer window and door regulators. How do you handle that. The 72 is the only year.

[@terryeason4319]

I have a 1966 that Im fixing up. I like the look of this interior but I do not see that it is available for 66. Where can I look to find it. Thanks

[@CJClassicTrucks]

It looks like we don't carry it yet but I would call TMI and see what they have.

[@MAYCOCustomRestorations]

Might put one of their kits in the truck I’m building

[@CJClassicTrucks]

awesome glad to hear. the seat is super comfortable and the rest of the interior looks great an mounts very easy.

[@brandonj3556]

Does the seat come with the mounting bracket? I cant find it on their website.

[@elcoy4348]

Can you give me some information of where do you guys buy the sit and the doors panels ?

[@shannonlove6156]

Does the dash pad last like original.

[@ehalliday6914]

can i get upgraded bench seat for my 94 Dodge Ram single cab?

[@RJ.Ev.G]

Can you use the factory seat brackets? Or do you need to order those from TMI as well?

[@CJClassicTrucks]

the factory seat brackets will not work.

[@brandonj3556]

@@CJClassicTrucks Do you have a link for the mounting bracket? All I see on the website is a bracket for a ford.

[@DJatVRR]

Where are your products made?

[@CJClassicTrucks]

the interior is made in the USA.

[@drucl8n]

I really wanna know more about this paint is it just primer? I love the look

[@CJClassicTrucks]

andrew its just primer

[@leviwoodring6101]

Did not fully Install dash pad. Why? Did not want to remove gauges radio and glove box?

[@CJClassicTrucks]

Our dash pad fit tightly with out the screws. i did after the video spend some time to get the screws on the back

[@benbutcher86]

At 8:14 🤣🤣 no teeth involved

[@terrysaenz3009]

Really nice looking, could be a lot better if the pattern straight.

[@josephkostinko739]

I would want to use nuts and bolts instead of self tapping screws on a door handle.

[@rubenfilippus2956]

Do you sell them on eBay?

[@CJClassicTrucks]

no we dont

[@sblsbl7600]

Is the original look of the partial panel available?

[@CJClassicTrucks]

what are you looking for?

[@damndisplace07]

How much that run ya?🤔

[@CJClassicTrucks]

The link for the parts is in the description

[@wayofthewordwow7574]

Nice

[@CJClassicTrucks]

Thanks

[@rattyvdub]

Dash pad is a POS. The bolts are glued to the bottom of the dash pad with bondo! Didn’t even last a month before two of the three bolts snapped off the panel.... had to epoxy they back on after cleanup. Would help if they used fiberfill

[@curtodell4154]

thats a shame i really wanted this my speaker grill has had it and i dont really want to pull the windshield again to fix it was hoping i could cover it up nicely with something like this

[@jessethompson1545]

Seat looks good, but the door panel ruins the look of the truck.

[@gregk.6723]

Also, two-sided tape at the top of the door panel, not a very good design.

[@bradclark2922]

19/64" ?? But it's not a 1964...

[@wayofthewordwow7574]

Nice

[@CJClassicTrucks]

Thanks