Clean Glass for PERFECT Window Tint in SECONDS

[@RicardoYanohon]

Thank you Tint Dude. I'm learning a lot!

[@davidpadilla1897]

Hey, good tips. It's amazing how we keep learning.

[@autofilm1165]

Very very good video ,thank you so much brother. I'm from Cambodia 🇰🇭

[@UseYourBrain.]

@autofilm1165 I loved visiting Cambodia! Many times. The people are so generous and amazing. ❤

[@dexa478]

Totally awesome channel! Thanks for your efforts to make it publicly available

[@O2MEND]

Thanks for all your tips and tricks.

[@spacep0d]

Is it okay to use Optimum No-Rinse car/window wash solution as window slip for tinting? You're very diligent and I can tell you're good at what you do. Thanks for the tips.

[@nickf8940]

baby shampoo is cheap and works perfect

[@TheSixStringGuy]

Use Johnsons baby soap in a zep bottle...usually 7 pumps

[@Poc3d]

By cleaning the bottom first arent you sending dirt from the top down to the bottom and leaving contaminants down under the bottom seal?

[@marcoiniguez4020]

my thought process as well, have you found any info on if its ok or not to clean the top first or bottom first and why? thanks to anyone that chimes in. Beginner tinter here!!

[@oj4249]

Hey man. Love these type of in depth videos . Just one question. Can the razor blade damage seals when cleaning the side seals? You said it butts up against seal. Also more videos like this please 🙏🏻.

[@DetroitTintStudio]

Possible but really unlikely if you use it safely. The edge is against the glass so the blunt side of the razor might bump against the seal but that’s all. Glad you like the video!

[@jt9264]

Hi, I recently started tinting and have been using a blue scotch bright to quickly scrub over the window, is that overkill( can I not do it and get the same results) or is it a good practice to keep using

[@kompuxperts]

Question, what about the tempered glass letters on the glass, if theres any problem with that? Mine are some thick. Thanks

[@saul4691]

Hello Matt hopping you are doing great . Do you know of any product that would remove armor all or any other type of greasy dressing from door panels it is almost impossible to tape anything on door panels or any other plastic trim when that stuff has being applied. best regards. thanks

[@brandonesparza5134]

Your the Goat! great content!

[@mayrondelacruzperez5893]

You are the freaking best at it 🎉

[@glfery]

€440 to pay to tint my two cars with 3m carbon tint (Ireland) Or Less then €200 for 30 meters of Suntek Carbon 2 ply range and all tools to do it myself.....was convenient doing it myself and after watching you content(witch is very good by the way ,well done) I'll do it myself👍🏼

[@2034retard]

howd it turn out?

[@pnboy0584]

Is the soapy water just dawn and water? Or what soap is best

[@Mobiletintinguk]

hello sir. can you tell me which type material of glass sides windows we ovoid clean it by blade to avoid scratches glass. and how we van know thats glass material affect by nlade. please answer my question 🙏. thank uou

[@DetroitTintStudio]

You can use a blade on all glass. Toyota has a newer yellow glass coating but it’s not something ur gonna run into unless you do a lot of new Toyotas

[@gabrielsanchez290]

Is the tape supposed to help you slide the tint easier? I am new at this and want to start my tint business. So I am trying to soak all the info I can. Did my first two front side windows on a hummer H3 and they were a PAIN.

[@dakotalayinlow]

I think the tape is so the tint doesn't stick to the panel and to keep debris from getting between the film and the glass

[@DetroitTintStudio]

The tape is like having a brand new seal. It covers and holds any dirt from it getting into your tint. So especially when ur new, it keeps the sides much cleaner

[@gabrielsanchez290]

Thanks fellas. Much appreciated.

[@dyloncomeaux5314]

Where do you get the sticky plastic from?

[@HockeyLAKings119]

What do you do if they have a sticker, like a anti theft sticker?

[@BENNMOTOVLOGS95]

What kind of tape do you using on sidings

[@eclipseautomotivefilms2268]

Great video, always learning 👍🏻👍🏻👍🏻. Thanks

[@emonshahriar3860]

Good job bro love u from Bangladesh 🇧🇩

[@lalnunpuiavarte9639]

We tend to leave some dust specs even after cleaning just as instructed. Any tips to eliminate those remaining contaminants? Thanks

[@joshhill9053]

Yeah do it in the garage

[@redciroc1211]

My tint dude just sprayed some soap water and started tinting he definitely didn't clean the windows thoroughly

[@Xijinping_Wanbatan]

what do you do with the tape after the tint is completed? just peel off right away, and with the window up or down?

[@alyt6242]

doesn't matter, the window can be up or down and the tape wont interfere with the film.

[@sabiefreddy6666]

Quick question! I have a 2022 Subaru Ascent Onyx Edition and I would love to window tint my front window but the modern Subaru’s use a 2 front camera system and those cameras don’t reach anywhere near the front windshield to kinda have an idea in where to cut the tint.. thought it would be a good idea if you please made a quick video on that or if not a comment would be fine! Thank you and thank you for your DIY videos

[@DetroitTintStudio]

Officially from Subaru, don’t do anything to the windshield. From what I hear from other tinters, a light film like 50% and up won’t effect the system. no one could guarantee that tho. I wouldn’t ever do a windshield strip or try to guess where the cutout area is and rely on the system working. Too much guessing without trying a bunch of things

[@harleythomas9904]

Am I doing too much by scraping and scrubby padding the whole window? Sometimes I end up with little smudges on my glass in the light and I have no Idea how they got there. Can't tell if it's a spot I missed or excess soap suds??

[@DetroitTintStudio]

Probably not the cleaning, either the glue stuck a little while sliding it into place (might hear some sticking or popping sounds). Or it’s air gets stuck in the glue when squeegeeing air pockets over an area you already tacked down. These films have a pressure sensitive adhesive so once it’s pushed onto the glass, it’s made to stick to it.

[@jondestua3761]

Good skills. Thanks for sharing.

[@KCWilliam]

Place another piece of tape to sandwich the door "carpet" plastic with a bit of overlap on the tape.

[@keanuhoang9689]

So you tape any window regardless of felt gasket or not? because Ive only been taping when the felt is present

[@DetroitTintStudio]

Yea, it’s way less helpful on a new car with a rubber seal. But on an older vehicle with rubber seals, they build up a lot of dirt. I’ve been tinting for years without tape and since I’ve been using it, it helps with the random specs here or there on the sides. If you haven’t been tinting long, it’s going to be waaayy more helpful that that.

[@GrandHuevotes]

I found the razor blade creates micro scratches if you hold a bright led light to the glass.

[@justincarrizosa3367]

u can use clay if you're worried about a customer holding a light up to your install

[@matheusnanovazelandia]

Nice video! Thanks for that🤙🏽

[@podium918]

What tape is that . Can I get it at Home Depot or lowes???

[@DetroitTintStudio]

House wrap tape or sheathing tape. You can find at any hardware store. I just came out with a cheaper alternative that works just as good 313tint.com/products/seal-guard-for-covering-side-seals

[@brayoTints]

thank you boss

[@joshtaylor3857]

steel wool grade # 0000 to scrub the windows. Is what i use have you ever heard of that

[@Ladysman_217]

Steal wool leaves a lot of metal "lint" behind. Sure it's scrubs the glass clean but it leaves more of a mess than what you started with.

[@DetroitTintStudio]

Yea, I use to use it for removing glue. I don’t like that it flakes apart and rusts so I moved to using scrub pads instead of need be.

[@DekGT5mad]

@@DetroitTintStudio Yeah it's single use and has to be stored properly. I saw the aftermath of someone trying one of the "ball of lathe spiral offcuts" scrubbers, looked like the glass had been hit with a orbital sander! 😂 😂 😂 😂

[@dash4uson760]

It seems little bit time consuming. I respect your efforts to tint better quality and saftey.

[@midwestrotty8871]

it is time consuming for sure but this is what puts you apart from the other guys who don’t clean as good

[@spacep0d]

*safety

[@A6Legit]

Preparation is key

[@motorwraps3303]

Great job

[@brotherwraps310]

nice tips..

[@catz-media]

He not doing this with every tint job or he charges too much

[@유인형-z4y]

좋아요~~

[@toneflix]

I know this sounds crazy… BUT what if I put down 70% ceramic all around a car. And then put regular tint after so I don’t have to buy another expensive roll

[@luisespino8212]

I don’t have OCD but if I start cleaning like this I’ll OCD lol

[@redciroc1211]

Dude you not doing all that cleaning to every customers windows lol that would literally take two days to tint

[@SandMan-e3i]

If you take care of your customers, your customers take care of you! -Business minded people! He's been recording himself cleaning, and tinting vehicles for years! Nothing has changed, and he's added ways to clean more efficiently for him! If your to lazy to clean each vehicle, that's on you!