Cleaning melted fusible interfacing off your iron - This really works!! | Claires Top Tips | SEWING

[@karenwilliamson2906]

Brilliant, glad I have found this way of cleaning my iron. Took 3 lenor sheets to get it immaculate again. Thankyou for sharing this tip.

[@BeautifulThingscraftandsewing]

Glad it helped

[@elementgypsy]

Oh wow! I tried magic Eraser but only helped a little. I'll buy dryer sheets tomorrow!

[@BeautifulThingscraftandsewing]

good luck

[@shannono1304]

You just helped me save my grammys iron that she passed down to me. I was devastated. Thank you so much for this. I thought I was going to have to throw it away. I tried so many other ways to remove it but it didn't work. ❤️

[@BeautifulThingscraftandsewing]

Glad I could help

[@MaryannLloyd-e7x]

OH! My gosh. a huge thank you for this tip. Just did the unthinkable & sat the hot iron on sticky side of fusible fleece. Raced to computer and found your video. Had dryer sheets in with my fabric & wool collections so grabbed out 2 and WALLA!!!!. My iron was looking brand new in a few seconds.

[@BeautifulThingscraftandsewing]

Glad it helped!

[@Toebex]

I cannot believe how well this works, literally immediately just comes off with no issues. Thank you so much

[@BeautifulThingscraftandsewing]

You're welcome!

[@lodestar11]

Thank you SO MUCH for this!! Just had a mild panic but now everything is fine because of this video!! ♥️

[@BeautifulThingscraftandsewing]

I'm so glad!

[@karynminer348]

Thank you! Thank you! Thank you! Nothing else was working and I was really afraid I would have to buy a brand new iron. It took one dryer sheet and I have my iron back, great tip!

[@dannathan2116]

THANK YOU!!! This worked perfectly on my Rowenta DW-2070 with it's stainless steel plate that has about 300 tiny steam holes in it. I thought for sure it was ruined. I tried this tip and was thoroughly impressed how well the dryer sheets took off all the glue and left the plate smooth, clean and as shiny as when the iron was new!! I did have to use 3 sheets on mine, but who cares!! The Rowenta has a highly polished SS plate and it irons so well because of the smoothness of the finish, so that is why I was so worried it was ruined when I got the glue on it. Truly, I am so glad I found your tip and again, thank you so much for sharing it with us!!

[@BeautifulThingscraftandsewing]

So glad it helped

[@veronicah6766]

Yes, mine it the same. IT worked.

[@jennifergeraci3656]

My daughter did this exact thing to the entire bottom of her brand new iron. This absolutely saved it!! Couldnt believe it worked as good as it did! Thank you!

[@BeautifulThingscraftandsewing]

Glad I could help!

[@jules43210]

Wow and thank you so much .. I did just as you said somehow touched a scrap of fusible webbing with my iron, the good iron I had finally splurged decent money on to replace the cheap but practically useless $15 college days iron I'd had for over 40 years . I never thought an effective iron could bring such joy but it's amazing how it can really make a project look more professional, so I was very dissapoointed. Your tip worked like a charm . I tried a dye and perfume free sheet first and it was somewhat working, when I tried the regular sheet the sticky stuff came right off! So nice when a tip like this actually works and this is non abrasive so saves a Teflon finish from scratches. Thanks again

[@BeautifulThingscraftandsewing]

so glad it worked. A good iron can be the makingo f a sewing project. I love a good bit of steam!

[@baileysmom31]

You just saved my iron. I was absolutely devastated when I did that and I was thought I was gonna have to buy a new iron. You saved my iron and my day. Thank you so so much for this tip

[@BeautifulThingscraftandsewing]

Glad I could help

[@sgalpal82]

Give this woman a Nobel Prize! Saved my iron and myself from a meltdown!!!!!

[@BeautifulThingscraftandsewing]

Ah why thankyou!!

[@petraz.6631]

I have ironed on fabric fusing tape to adjust the length of my dress before I stitch it together. Also did the same with new tie around the neck shoulder straps which as you can immagine left the iron full if sticky mess. This tip cleaned the iron in less then 3 mins with no fuss at all! I used 3 of them sheets as my iron was in quiet bad state and OMG It WORKS!! Recommend to everyone if you have same problem. Thank you sooo much!!!

[@BeautifulThingscraftandsewing]

It's a goodun

[@hollyluffman6108]

This worked in seconds! I had tried several things and nothing worked and I found your video. Thank you! While teaching my niece to sew she placed the iron on pellon 809 and she was so distraught that she had ruined my iron. She and I cheered. Thank you again!❤

[@BeautifulThingscraftandsewing]

Wonderful! so glad it worked

[@kellyvalenciaaiken]

This WORKS!!!!! I wish I could post before and after pictures. Holy Moses!!!!!! Thank you!!!!

[@BeautifulThingscraftandsewing]

Love it!!

[@cynthiaconnell]

Totally worked. I had a cheap plastic coating of interfacing stuck to my Rowenta. Used a bounce dryer sheet and it took it all off. Great tip! Thank you

[@BeautifulThingscraftandsewing]

Excellent!

[@BRYBama73]

Thank you! I tried vinegar and a baking soda paste with no luck. This worked perfectly - like magic!!!!!!

[@BeautifulThingscraftandsewing]

You are welcome

[@Fojimama]

Thank you so much! I just purchased a higher end new Rowenta iron and did accidentally press the front side of the fusible interface! Wow! Saved me from SO much frustration and possible damage to my wonderful iron!!!! Thanks!

[@irateoverlord.theresa1324]

LOL!! Me too!!!

[@BeautifulThingscraftandsewing]

Glad I could help!

[@dennymoodie7465]

As a novice seamstress, who had just messed up her iron with fusible interface, this is a GODSEND. So easy, and it works

[@BeautifulThingscraftandsewing]

glad to be of assistance

[@elliestone3083]

THANK YOU. This is the first time I have gotten the fusing part on my rather new iron - which has a coated bottom, not just plain metal. Came off beautifully. Wonderful tip.

[@BeautifulThingscraftandsewing]

You are welcome

[@dianagunn1168]

I just have to say THANK YOU for this video. For the first time ever, I did in deed iron a fusible interface on the wrong side. Unfortunately, I also got it on my ironing board cover. The iron came clean fairly easily. I did have to use 2 dryer sheets but it worked. Again, THANK YOU!

[@BeautifulThingscraftandsewing]

so glad it helped

[@judykilger4950]

Thank you!!!!! Oh my goodness I thought my iron was ruined ! I never would’ve tried this if you hadn’t posted this ! 👏👏👏👏 you are a lifesaver !

[@BeautifulThingscraftandsewing]

Glad I could help!

[@samhawkeye09]

Saved my iron and so much easier than all of the other solutions!

[@BeautifulThingscraftandsewing]

glad I could help

[@chrissereque8716]

This really worked! Thank you. Another smudge on the iron plate came off using a Gillette 3-blade men’s throw-away shaver, and the teflon seems okay with no scratches.

[@BeautifulThingscraftandsewing]

Fantastic!

[@darylratliff3959]

OMGosh.....it really works!!! I just cleaned by iron after using Bosel Fuse-It. Worked like a charm! Thanks. Cindy

[@BeautifulThingscraftandsewing]

You're welcome!

[@lisaroche1021]

Oh my gosh this works wonderful I cannot believe I thought I was gonna have to throw my iron away I am so grateful grateful thank you

[@BeautifulThingscraftandsewing]

you are welcome

[@aprildegele1510]

BEST. TIP. EVER. I had a couple of spots where I got interfacing glue on my iron. Wasn't causing a problem, so I figured I'd clean it eventually. Then today, I was making double fold binding with waterproof canvas. Well, the canvas separated and I got the waterproofing on my iron in a large spot. Tried Magic eraser, simple green and goo gone and nothing worked. Then I saw this video and, voila! Had to use a few dryer sheets and take my fingers into my own hands, folded the sheet up several times, and wiped quickly on the little remaining spots (don't recommend this. You have to be really fast) and now my iron looks like new. I wouldn't have believed it if I'd not seen it myself. Took less than 5 minutes. Never using anything else, especially the expensive cleaners, to clean my iron. Thanks SO much for posting this!!!! Brilliant. Bonus ... my house now smells like fresh laundry :)

[@BeautifulThingscraftandsewing]

I love this. So glad it helped

[@jylromain6439]

I accidently touched the iron-on with my iron but almost immediately realized it so it wasn't too awful. The iron cleaner I bought is in my sewing room. Somewhere. So I came looking for solutions and found you. I recently had a mouse and heard that Bounce dryer sheets would repel them. But the cinnamon worked so the sheets were looking for a new job. They found it. I felt like I worked at it a little more than you but my iron is shiny clean now. Thank you.

[@BeautifulThingscraftandsewing]

So happy you found a use for them!

[@vickywilton2282]

Did this exact thing, ironed wrong side of interfacing and my iron was a mess. This worked perfectly. Thank you!

[@BeautifulThingscraftandsewing]

You are welcome

[@amandad9704]

Thank you! I really messed up a project the other night and got fusible webbing all over my iron, and the other thing I tried didn't help at all. This was amazing! Took me three dryer sheets, but it is clean!

[@BeautifulThingscraftandsewing]

Glad it helped!

[@lisacobb7525]

Oh my gosh this worked so well. I was trying to do an iron on transfer and didn’t realize what happened until I turned the iron over. I was ironing the transfer upside down. The sticky paper was stuck to the iron. Didn’t know what to do so I looked it up. Found this trick & tried it immediately. Worked great. I balled a fabric softener sheet and rubbed it over the iron. After a couple of sheets, it’s off. Thanks so much!

[@BeautifulThingscraftandsewing]

phew that sounds like it could have been a melty mess!

[@soniaclarkson3766]

So helpful!! I just fainted when I accidentally got sticky fusible interfacing on my new iron, Your tip worked sooooo goood 😘

[@BeautifulThingscraftandsewing]

Si glad I could help

[@gloriadiaz-britz3599]

Thank you thank you!!! I used my brand new iron to apply some iron-on patches and forgot to put some fabric between the patch and the iron. I had a huge mess of melted plastic and fusible goo on the iron and was terrified I'd never get it off I used about 5 dryer sheets and now my iron looks perfect! Thank you for saving my iron!!!!

[@BeautifulThingscraftandsewing]

Glad I could help!

[@CarolReid-q4p]

Thank you for this, I could not believe that I would do it but lo and behold, I was using very light fusible and totally messed up. I went out and bought some tumble dryer sheets yesterday and I now have a clean iron again.

[@BeautifulThingscraftandsewing]

It's really super, glad it worked for you

[@kaylapatterson6708]

Ngl, I watched with pretty strong skepticism. But, I figured I ought to try it before attempting to scrub with soap or chemicals. Took the glue that had been baked onto my iron for months *right off* like it was *butter!* 🤯 Absolutely genius tip; thank you so much for sharing!

[@BeautifulThingscraftandsewing]

HaHa that made me chuckle. Glad it worked

[@juelradtke9663]

I just did this for the first time and it cleaned the iron beautifully! Thank you so much!!!

[@BeautifulThingscraftandsewing]

You're welcome

[@jgalarza1960]

I It Works like a charm! Thanks for the tip. You have to perform the fix EXACTLY as described.

[@BeautifulThingscraftandsewing]

glad it helped

[@pattidudley573]

Worked! Whew - trying to finish a dress for a wedding - didn't need to have to run out to buy a new iron! Thanks for posting!!

[@BeautifulThingscraftandsewing]

Glad I could help!

[@kjorndog]

I won't lie, I was not expecting this to work but I tried anyways and here I am with a clean iron. What is this sorcery!

[@BeautifulThingscraftandsewing]

Its magic

[@gaylesplaylist]

I found it worked perfectly!

[@MissUbeVerse]

Just tried it since I’m new to sewing. Best tip ever! Thank you so much for this. It actually worked!!!

[@BeautifulThingscraftandsewing]

Wonderful!

[@summerc.5369]

Yes! Yes! Yes! It worked!! Thank you for sharing this quick, cheap, and wonderful trick!

[@BeautifulThingscraftandsewing]

You're welcome!

[@karenwashburn829]

Thank you so much. I ironed interfacing on backwards, on a steam press. Your idea worked and all of the glue is gone. Thank you

[@BeautifulThingscraftandsewing]

Glad it helped!

[@kbook33]

It worked like magic! Thank you so much for posting your video.

[@BeautifulThingscraftandsewing]

You're welcome!

[@sunburst3476]

THANK YOU SO MUCH FOR THE TIP! I didn’t have dryer sheets, but I did have those swifter sheets and I used the smooth side to clean it. It worked really well

[@BeautifulThingscraftandsewing]

Glad it was helpful!

[@sonipitts]

This is going to save the day today. I was stumped on how to get the nasty off, and now it looks so easy!

[@BeautifulThingscraftandsewing]

Good luck

[@kimjesch7309]

It worked!!! Thank you for saving my new iron!!!!

[@BeautifulThingscraftandsewing]

You're welcome!

[@carolmoger9869]

I just cleaned my iron! It looks like it just came out of the box. I had gotten hemming tape on the bottom. I'm so grateful to you for this tip!

[@BeautifulThingscraftandsewing]

Wonderful! so glad I could help

[@jamiefulen]

Brilliant! I thought I just ruined my new cordless iron and this tip saved it! Now I'm wondering of all those irons with messy sole plates I had to throw away over the past twenty years I could have saved. Again, THANKS!!!

[@BeautifulThingscraftandsewing]

Glad I could help!

[@arlenehawkins8988]

This really really works! Thank you for this fabulous tip. I had tried detergent, goo gone and scraping with my fingernail to no avail then I found your video. You saved my Rowenta Iron.

[@BeautifulThingscraftandsewing]

Wonderful!

[@sherilynnschoenke4289]

Absolutely brilliant. I had only had my brand new iron a few months and yikes, I thought it was ruined. Thank you, thank you

[@BeautifulThingscraftandsewing]

You're welcome!

[@Nonna_Tina]

Thank you so much! You saved my iron. It was covered in adhesive hem tape.

[@BeautifulThingscraftandsewing]

Glad I could help!

[@Taxidriver107]

I just tried this and it worked! Thank you, I was just about to buy another iron.

[@BeautifulThingscraftandsewing]

so pleased

[@TerriPerlman]

Thank-you so much!!! You saved me and our Rowenta iron! I accidental purchased two-side fusible fleece!

[@BeautifulThingscraftandsewing]

woops!

[@pkt7050]

Thanks! It works just as easily and quickly as your video shows.

[@BeautifulThingscraftandsewing]

You're welcome!

[@janetpayne7738]

Absolutely fantastic. Ive just done this to my very sticky iron. Thank you so much.

[@BeautifulThingscraftandsewing]

Glad it helped!

[@bluraven216]

Fantastic! Just had my own "melty moment" :-) so was so glad to find this tip. I previously used a Mr. Clean white sponge but I know those work by abrasion, so didn't want to scratch my iron.

[@BeautifulThingscraftandsewing]

Glad it was helpful!

[@annsmith5096]

Worked like a charm! Iron cleaned good as new in seconds. Thank you!!!

[@BeautifulThingscraftandsewing]

You're welcome!

[@bethanyriver8232]

Well, I wish I had before and after pictures. Thank you very much, this was a very helpful top!

[@BeautifulThingscraftandsewing]

Glad it was helpful!

[@elizabethsawyer5906]

Thank you just did that very thing with my mini iron while fusing interfacing onto my fabric🤪 Your tip worked a treat. 💕

[@BeautifulThingscraftandsewing]

Glad it helped!

[@brendasmith3101]

This totally worked and so easy, also when your iron the dryer sheet it has a nice smell to. Thank you.

[@BeautifulThingscraftandsewing]

Great to hear!

[@HannaFate]

Thanks! This works better than the old way of swiping the iron on some wax paper, then on a brown paper bag. That worked, but made a lot of smoke.

[@BeautifulThingscraftandsewing]

Glad it helped!

[@janetrodgers8473]

Thank you Claire. I used the stick, it actually made the sole plate worse, stuck in the holes, despair. Tried everything mentioned, a bit better, but not good enough. I'll be so happy to try this tip. Thank you.

[@BeautifulThingscraftandsewing]

I used to use the stick too, but ended up burning my fingers and clogging it all up. This really really works, it's amazing

[@ridewithtwoindians3983]

OMG. Thank you!!! I just did this today and your trick cleaned my iron🤩🤩

[@BeautifulThingscraftandsewing]

You’re welcome 😊

[@tiffanynelson9061]

Oh my goodness! You are a wizard! I just had general sticky stuff on the bottom of my iron. So quick and easy! Thanks very much for sharing this great tip.

[@BeautifulThingscraftandsewing]

Teehee I've been called a lot of things but never a wizard!

[@iamsharon3306]

Thank you so much! It worked. I thought I was going to have to throw my iron away. You saved it

[@BeautifulThingscraftandsewing]

Fabulous

[@karlapadbury3142]

Dryer sheet to my rescue tonight! Thank you for the video!

[@BeautifulThingscraftandsewing]

Glad it helped

[@amyrivera616]

Thank you ! Just watched this and did this immediately and it worked !!! Couldn’t believe how quick it worked too! Thanks again !

[@BeautifulThingscraftandsewing]

glad it helped

[@ericabeecroft7959]

Thank you Thank you thank you 😊

[@cherilynblake8384]

thaaaank you! ive tried everything, alcocol, peroxide, acetone... this is my next try!! lets hope it works!!!

[@BeautifulThingscraftandsewing]

Good luck!

[@queenavila8597]

Thank you. I thought I ruined my ironed and need to buy a new one. It worked so easy and simple

[@BeautifulThingscraftandsewing]

Glad I could help

[@bluraven216]

A follow-up on yesterday's comment. The dryer sheets (4) worked to clean my iron. I later managed to get More gunk (interfacing? polyester?) on my iron that the sheets wouldn't remove. But the real problem was with the chemicals of a total 7 dryer sheets atomized into the air of my sewing rom, I started to get really ill - headache, nausea, confusion... 24 hours later I am still getting this out of my system. So just a heads up that if you're sensitive to chemicals (I am the 'canary in the coal mine") you should consider another method for cleaning your iron. I stopped using these sheets years ago when I heard they could be toxic to pets. Looks like they're toxic for me too!

[@BeautifulThingscraftandsewing]

Oh gosh I'm sorry to hear this. I only use them on freshly melted gunk and 1 now and again. I don't think this is a solution for cleaning off old gunk or melted items for sure. Good to know though, I hope you feel better soon.

[@bluraven216]

Thanks, I'll be fine. Just wanted to warn others. I get the same reaction from Febreeze, Hairspray, etc.

[@rondaschafer7780]

Wow, you really saved me with this tip! I’m going out first thing tomorrow and getting some dryer sheets!

[@BeautifulThingscraftandsewing]

Glad I could help! warm the iron back up before hitting the sheets

[@susiehenline4374]

This was so quick and easy on my non-stick mini Dritz iron.

[@BeautifulThingscraftandsewing]

So pleased for you

[@mrs.diannalynn1383]

OH MY you have saved me ! thank goodness , your WONDERFUL !!

[@BeautifulThingscraftandsewing]

Bless you. Glad I could help

[@cecilehoare3053]

This is awesome! I just did a huge applique job and got more than the desired amount of adhesive on my iron! I got it all cleaned up with the baking soda trick then made beeswax food wraps for my daughter and guess what? Now I have bees wax on it! You bet I'll be trying this idea next! Thanks Love!

[@BeautifulThingscraftandsewing]

Awesome, I bet it will take the wax of too. Keep me posted

[@pattymiller4783]

Dang it works! Thank you so much. And of course you would not use your best iron for a video! - I hope people really didn't complain about that.

[@BeautifulThingscraftandsewing]

You'd be amazed what people do complain about LOL!! Glad it helped you

[@emmaw_e]

Thanks so much for this tip, it cleared my mess right up !

[@BeautifulThingscraftandsewing]

Glad it helped!

[@jennifermason669]

Thank you for sharing! I had cheap dryer sheets so it took 2 and it left my iron greasy. But it worked!! 👍😁

[@BeautifulThingscraftandsewing]

Glad it helped!

[@IamHeatherJo]

I'm so happy I watched your tutorial before trying a few others that showed up in my search before yours. So simple and so effective and you are adorable!.Thank you for posting this fantastic solution and saving me much grief. :)

[@BeautifulThingscraftandsewing]

You are very welcome

[@yvonnebromberg1647]

Thank you! This tip saved my new iron!

[@BeautifulThingscraftandsewing]

Great to hear!

[@tomevans9451]

Thanks very much for the tip! I had the remains of an iron-on patch stuck. Didn't have a tumble dryer sheet handy (or a tumble dryer for that matter 😆), so tried kitchen roll with a few drops of vegetable oil. This worked OK, though probably not as well as the dryer sheet.

[@BeautifulThingscraftandsewing]

I think you can add fabric softener to an old cloth and it will work too

[@janettesinclair6279]

Thank you for this easy peasy trick! I have just got some wundaweb melted on to my iron, so I am off now to buy tumble drier sheets. Sounds much easier than a mess of salt and vinegar etc.

[@BeautifulThingscraftandsewing]

Glad I could help!

[@janettesinclair5902]

And it worked beautifully! Thank you so much - you saved me the cost of replacing my iron!

[@martaaberg3330]

Wow! That is amazing! Thanks for a great tip. I always wonder who comes up with this stuff. Like, who first thought, "Oh, no! I've burnt interfacing glue onto my iron! What will I do???? I wonder if ironing a dryer sheet will take it off?" I make note cards and invitations using decorative paper napkins, card stock, and plastic wrap. There are occasional accidents with the plastic wrap and the iron. I'm going to see if this works on that, too. Thanks again!

[@BeautifulThingscraftandsewing]

I know LOL I do that too. Let me know if it works for you, I suspect it will do

[@Nagoz83]

Usually when you buy appliques, on the bolt, or within the instructions as with any kind of fabric, it tells you how to clean it. With applique it says not to use fabric softener otherwise your applique will peel off~

[@amydouglas6576]

Thanks for this tip. I was actually going to spend money on a new iron!! Instead I will buy some of these sheets and hopefully return my nice iron to its former glory!

[@BeautifulThingscraftandsewing]

You are so welcome!

[@aa1exandra]

This worked perfectly! Thanks so much for posting!

[@BeautifulThingscraftandsewing]

You're welcome!

[@madweenerdog8403]

SO MANY THANKS!! I thought I'd ruined my grandmas iron while making a quilt but it was such a quick and easy fix

[@BeautifulThingscraftandsewing]

glad it helped

[@katrinafarrar5816]

From the US and I dislike my melty mess!😩 Thank you for sharing this helpful tip!

[@BeautifulThingscraftandsewing]

You're so welcome!

[@imanobody3666]

This works everyone!!! Thanks for the video.

[@BeautifulThingscraftandsewing]

You're welcome!

[@patrickfarley8036]

Wow, thank you for this great tip! With my brand new iron, in a rush, missed a step and gluey iron plate as a result! Blast it all!!! Then, I find you straight off on KZbin and viola!! Thank you thank you thank you! It's Thanksgiving this week here in the States and right now, you're leading my list of things for which I am thankful! 😉 One bit of caution I would put out there, I used a sheet brand called "Bounce" and a bit of warning to anyone using this brand is HOLD YOUR BREATH while dragging the iron across the sheet and don't have your face over your work!!!! The fragrance coming off that sheet will knock you over!!!! Ughhh! 😖 No kidding, it burned my lungs! Next time (if there is a next time!) I think I'll try a USED sheet first. There may be enough residual chemical left to work well enough! These used sheets are also great as an embroidery interface on t-shirts or quilt cotton when making patches for appliques! As long as they're around, may as well re-use and re-purpose! Thanks again!!

[@BeautifulThingscraftandsewing]

Ah thankyou so much. Happy Thanks giving

[@veronicaschulz-lehr2867]

I melted the bottom of a shopping carrier to my one month old iron. I was trying to put patches on the bottom. I used a dryer sheet like the video said. This is brilliant and it worked. It cleaned the entire surface. Now need new idea how to fix the rectangular shopping bag.

[@BeautifulThingscraftandsewing]

Oh wow! I'm glad it works on other things too.

[@buffysato7151]

Thank you for such a great tip. It worked beautifully!

[@BeautifulThingscraftandsewing]

Glad it helped!

[@veronicah6766]

YES. This worked! Thanks. and it is not messy

[@BeautifulThingscraftandsewing]

Glad it helped!

[@robertahuggins822]

It worked...thank you so much. So easy👏❤️

[@BeautifulThingscraftandsewing]

You're welcome!

[@anabellagoeta1435]

Thank you very much! I tried it. This is incredible. I love it.

[@BeautifulThingscraftandsewing]

You are welcome 😊

[@mamtagurmukhani3661]

Wonderful tip...worked like magic..Thank you

[@BeautifulThingscraftandsewing]

You're welcome!

[@foxeymoore]

Excellent advice Claire,thank you. I love your ironing board cover.😀

[@BeautifulThingscraftandsewing]

thank you, its made with the fabric that I'm selling in my de-stash

[@tracycarifa8467]

This is BRILLIANT!! Thank you!!! Thought I ruined my iron trying to make COVID masks and then I found your video. Smart cookie, you!! Cheers!

[@BeautifulThingscraftandsewing]

Glad I could help!

[@jamiesilvia1861]

Thank you!!! You saved my poor iron!!

[@BeautifulThingscraftandsewing]

Yeah

[@analuciaurenabaena7222]

Thank you so so so so much! You saved my just bought iron 🥺💖

[@BeautifulThingscraftandsewing]

Glad I could help!

[@pammeyer4983]

Thank you. You saved my brand new iron👍👍👍

[@BeautifulThingscraftandsewing]

Glad I could help

[@pammeyer4983]

@@BeautifulThingscraftandsewing I couldn't believe how easy it was to remove. I was ready to mix baking soda and white vinegar into a paste 😱🤔☹️ when I saw your information on KZbin. You saved me the aggravation of removing that gunk from the face plate. I subscribed to your website as you demonstrated how to sew scraps together with a French stitch. This is perfect. I have so many scraps now I know what to do with them. Many thanks....be safe....Pam

[@ThatRomyKate]

Ill have to try this. I have some interfacing that stuck on to my iron as it was too hot and kind of melted the interfacing even though it was the right way round 😩 so will give this a go 😊

[@BeautifulThingscraftandsewing]

I'm sure it will