Cleaning out bath toys!

[@texbecks6682]

We don't do squirting toys for this reason. We put a dab of hot glue on the opening so water doesn't get in and they're good with an outside wash 🙂

[@Lunaisafoodie]

That is smart I should start doing this

[@vahidibrahimovic7281]

😢😢😢😢😢😢😢😢😢😢😢😮😮😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢

[@HaleyLast]

❤rose-hannah 😊

[@gaylenewood7707]

What if the child chews on the part the dry glue is and accidentally swallows and chokes on the glue??

[@T.S._LOVER13-nj5uk]

Yes my parents do it to for my sister sometimes it comes out tho..

[@pahstgskrn]

for the ones that squirt you can put hot glue dots on the holes and no water will get yhroigh

[@Akos_likes_eurobeat]

Through*

[@Specialed22]

What’s the point of them then tho

[@zleepydude]

​@@Specialed22 The kid still gets a fun bath toy, except no mold?

[@dumbbitchenergy3942]

@@zleepydudethe whole point of the toy is that it squirts water, if they seal that part then it’s just a doll

[@Specialed22]

@@zleepydude yea but it’s to squirt water and it defeats the purpose of the toy

[@maxinewalker9525]

Wait I used to play with squeeze water toys when I was a baby. I remember I used to look inside and there was all of this black stuff in them. THAT WAS MOLD!

[@amazingamiragaming1499]

Yea this happened to me too!

[@xxglowenxx]

It's mildew, but yes lol

[@Ugly_Sonic]

​@@xxglowenxx mildew is a kind of mold

[@cannedbread-ri8fx]

Same right after I was drinking from it 😕

[@AlexiaMoutzouris]

My mom told me it was from the water 😭

[@sheydavis4188]

Ok on Amazon they have sea animals or Dino’s or just a bunch of options they light up as soon as they hit water they are squishy ish but doesn’t suck up water that’s what I’ve been using recently

[@AubreyScruggs23]

The penguin you can’t squish because it has mold in it. If you take a wooden toothpick and poke it, then it’ll be able to work because that’s what happened when I had them.

[@KNY_and_Marionetta]

Yikes

[@BriannaBado]

No it actually never squished from the very beginning. We’ve never been able to get water in there lol.

[@kenmorgan8502]

What I was going to say

[@TaterTot2027]

Welp this comment is incorrect now.

[@BDB101SB]

It looks to just be made from a hard plastic lol

[@kenzie_meow321]

Thank you for sparing bluey and bingo 🙏

[@Moon_astro]

Blueyyyyy!!!!

[@Emeraldswildhorseisland]

Bingo!!!!

[@kenzie_meow321]

Socks!

[@Nico_di_Angelo_PJO]

I was gonna scream if she cut them saying: NO BLUEY AND BINGO!

[@Emeraldswildhorseisland]

@@Nico_di_Angelo_PJO lol same

[@uwood123]

If they did not have mold in them you could not keep them anyway because you cut is open

[@BriannaBado]

The bath toys are a year old so I was throwing them away anyways. Squeezable toys are not forever toys because they’re a breeding ground for bacteria and mold. I cut them open just for fun to see how much mold was in them but no matter what I was throwing them away because it was time to replace them.

[@evapapier8394]

@@BriannaBado Why not just wash them with bleach water or rubbing alcohol every couple of weeks?

[@Vvvvanny]

​@@evapapier8394 just like u wont be able to squeeze all the water out (resulting in mold) u wouldnt be able to make sure no strong chemicals, like bleach, are left inside so its probably not any safer than keeping the moldy toys

[@MsWitchHazel666]

​@@Vvvvannyit's quite easy to wash stuff with bleach and make sure it gets cleaned out again also you can put rubbing alcohol inside so it dries it all out bleach evaporates as well.

[@MsWitchHazel666]

​@@evapapier8394my thoughts exactly

[@AaliyahandAnaheraH]

That's so cool I want to tell my mother ❤❤❤

[@buzzzzzz69]

You could try soaking his favourites in a solution that is one part chlorine bleach to nine parts water overnight (then rinse thoroughly with just water) Obviously getting the solution right inside the toys to disinfect bacteria & mould. Another great thing to use is that Milton sterilising solution/tablets for bottles etc but it's pretty expensive. The bleach & water thing is supposed to be just as effective.

[@DaphneStrawberryEagle0966]

watching you cut those broke my heart they gave me memories of when i was a toddler

[@Toca.._..Ally96]

THOSE TOYS THAT BUTTERFLY IT STICKS ON THE WALL I HAVE ALL THREE OF THEM THEY SPIN SO FASTT❤❤I LOV EM❤

[@SNAILS12]

Ur a 2 yr old if u use em my sisters is 3 and she's just binned them bc she's to old

[@Toca.._..Ally96]

@@SNAILS12 sorry I meant my little cousin he was he bc my my uncle just passed away and things been real hard u know:(

[@Emeraldswildhorseisland]

@@Toca.._..Ally96 don’t apologize you’re never too old for something like that I seriously want the toddler Melissa and Doug wooden toys it’s fine they are literally fidget spinners stuck to a wall fidget spinners were meant for like 12 years old originally or like 10 to 8 like going from eight years old

[@Skeleton5526]

Why did you cut them in half to check if they had mould😊

[@Croatia1386]

That what I saying

[@jas9275]

Both of you guys are obviously children

[@IrielMellsMcrae]

What are you talking about?@@jas9275

[@aspectdreamerr298]

You’re clearly A child, it’s common sense why the toys were cut open.

[@vspvrkles]

maybe cause she doesnt have xray vision

[@gabriellalester6483]

thats a nice mother

[@susilangdon196]

I like to run our bath toys through the dishwasher to clean them - super easy and fast. 😃

[@Grace-h1u]

A hack for the rubber ones that you had to cut open, when you first get them you can supper glue the hole shut so they don't get water in them. Just a fun tip 😊

[@kimyono1]

I LOVE BLUEY AND BINGO❤❤❤!

[@emiliskarlsson3873]

I remember when I was a kid I used to like... squeeze them to get water in... and here is the BAD part. I then proceeded to squirt the water into my mouth and drink it. I did this for YEARS! Oh God how am I still alive. I even remember seeing black stuff coming out if some if them...

[@solanum777]

mmm good soup

[@bernardina7236]

Your so clean 😊

[@Deku-z2j]

I LOVE the bluey

[@amistenson2535]

Use glue to plug the holes. Choose the type of glue based on how long you want it plugged.

[@americaroleplayer]

I'd recommend smelling the holes. That's a pretty good way to determine if they're moldy or not.

[@JordanHeil-jp9wu]

They make squeeze toys that come apart so you can easily clean them. Something to look into if anyone's interested

[@SmilingCroquet-po6mt]

I love bluey.

[@astraviil3043]

Dear parents! When Your kids are very good behaviour all the time and always taking good care of their things, keeping their rooms very clean, loving their favorite things and want to make nice childhood collections of their things: books, clothes, toys, video games, clothes, DVDs and etc, then donataing is very wrong thing to do. If You have few space then storage boxes and shelves will help You out and Your kids will be very happy and thankful then, if they can keep their favourite things. Childhood things are very valuable and it is very sad, if they won’t see them anymore in their life. Every child should have the right to keep their things, if they can take good care of them all the time!!! Respectfully, Astra Viil 🙏🥰❤

[@Sugarplum990]

Dear Child, I agree that if a child is well behaved then parents shouldn’t get rid of all their toys. Even if a child is not well behaved, parents shouldn’t do that. But decluttering when a child has an overwhelming amount of toys has been shown to be greatly beneficial to the child. With too many toys, children are more likely to get overwhelmed or distracted and less likely to actually play with those toys. Another big part of this video is checking these toys are still safe for this child toy play with. As long as my children are enjoying playing with a toy and it’s in a safe condition, I will not get rid of that toy. Most of the moms in these types of videos feel the same way. This applies to everything else on your list too. Decluttering is not a bad thing at all. Respectfully, Elise

[@SaleenFrench]

Shine them on the light and you can see right through them and see if they have mold

[@KVAC_]

The bunny was just so cute

[@alyssabledsoe7399]

I love your videos

[@LeianaMondragon-xq5ck]

If you have rubber ducks don't cut them put hot glue under the little hole so it doesn't collect mold

[@aprilwilson3747]

Put hot glue in the little holes where the water comes out and that should prevent it from molding

[@AronPritchard1]

....buzz light-year? Is that safe for the tub?

[@BriannaBado]

It’s not a battery operated one

[@lianneschepers5818]

I would prefer the Party-saurus Rex

[@AudrinaThompson-k7q]

Such cute toys

[@DogmaGirlAD]

I just got a bigger hole in the bottoms of the squeezy toys and then the water doesn't get trapped up in there. Also, all bath toys go in the dishwasher every couple weeks.

[@brokoli2028]

This is awesome, thank you for caring so much about the little things it really does pass on. I remember my bath toys being my stuffed animals, I can't imagine the mold even though we did put them in the dryer.

[@Wolf2Tala]

The squirting toys were always so fun. But you definitely have to replace them periodically lol.

[@Lime-p5c]

A hack that I did for my kids bath toys is when I first get the toys before they can mold and stuff i hot glue all the holes water can get in so it can’t mold

[@zeusathena26]

You can give all the toys a wash in bleach water. Squeeze water into, & out of the toys. The bleach will kill off anything bad, & a few rinse swueezes will solve it all.

[@hl734]

BLUEY AND BINGO ARE MY FAVORITE

[@xoxobearfoodxoxo]

Boil the squirting toys in a mixture of water and vinegar, should kill any mold:)

[@biancafriesen1285]

God bless you all 😊

[@maddie-xe5bl]

If you get more of those water toys and don’t want water in them you can just put hot glue in the little hole.

[@melissanelms4]

This child is living the life!!!😅

[@suzanneford1571]

You can soak the squeeze toys in bleach and vinegar and get the mold out and save them

[@quinn9941]

So just wondering is u are checking for mold right in the toys well even if they didn't the kids still would not have been able to play with them cuz they were split in have lol

[@Liddie_22]

Pov: non of them were moldy Me:😂😂😂 Kid:😮😭😡 Mum:😮😅

[@alisagott3488]

Give me that bluey and bingo I am 10 and I still love bluey😊😅❤😂

[@annaleise624]

You can hot glue the holes shit to stop the water from getting in

[@Thatoneginger-r]

We used to clean ours out with baking soda and vinegar when I was little

[@starshowerr17250]

off topic but you’re literally so gorgeous what the heck😭 also, good job mama for keeping your baby safe!!!

[@johannagallagher5855]

Love this . Have a great week x

[@BriannaBado]

Thanks you too!

[@rosaleenlopez1843]

Y​@@BriannaBado

[@Its_WillyWonka]

@@rosaleenlopez1843burh

[@Maddie0129]

If you don’t wanna go through the hassle of hot gluing them, just get a little pack from Walmart or target. And replace them every month.

[@Lyla-y9v]

If you put hot glue where they spray out then the water can't get in and no mold will be built up inside of it

[@Sillybillysillybilly3]

You should do those little rubber toys without bottoms

[@DahliaAndra-fw1rc]

For the mold collectors you can put hot glue on the hole, they will still float as long as there air in them and they won't get mold in them :)

[@TheAviatior46308]

If you put silicone of super glue on the hole they can’t get water in them🫶🏼 I also have seen ones that open up so you can dry the inside out🫶🏼

[@AsherOvSacrifice]

To those few squeezable bath toys I still have 15 years later 😅 They’re crammed away in a box somewhere and have been for years, hope there’s no mold in them because I have no idea where they are.

[@i_am_bisexual_or_something3132]

My father's rubber duck kind of shattered after 17 years in storage

[@Titan-wm7ez]

i had a plastic cup to play with when i was a kid and it wasn’t even like one that was designed and kept in the bath it was just a cup from our kitchen

[@yelljal2764]

If you put a dot of hot glue over the hole on the squirt toys them won't be able to take in water and in turn won't be able to mold.

[@ybunnygurl]

My Mom used to just bleach my squishy barh toys. It wasn't a big deal.just a overnight soak.

[@Jack_official_Roblox]

Why are they lunchly?

[@kipkip8268]

I need the Eric Carl stuff so bad

[@abiy1035]

If you're worried about mould, don't put them on your bath mat. And don't cut them open...? (Without some kind of respirator)

[@julieklimczak6199]

If i were her kid id be mad that she ruined some of my perfectly good toys 🧸 😢😢

[@roosknaapen187]

I put my kids bath toys in the dishwasher from time to time 😁

[@magdalupak7022]

I luv your hair 🎀🩷💖✨

[@mariamch7557]

Love it😊🐢

[@audreyklemstein5279]

Mushie sealife mold free toys on target I heard get views about them

[@Zoeyatv5]

If you cut it open it doesn’t matter weather there’s mold or not

[@RubixCubeSolving7]

NOT THE BUNNY 😭 😭 😭 😭

[@hydration7603]

I have toys too!!! I love them. They are fun. I do not play with them in the bath. I play in my room. They do not grow mold. Maybe get better toys.

[@i2010mac]

Do the toys that can get water in them..I put hot glue in the hole to keep them safe ❤❤

[@taicollins2303]

I have that exact same squirting buzz, it's hard and it squirts out the foot and i PROMISE YOU there is definitely at least one or two new life forms growing inside his head

[@trashed_scattered9555]

Could we not dilute bleach and treat the mold?

[@BriannaBado]

I don’t use any cleaning chemicals on my sons stuff. Bleach also doesn’t fully treat mold. It makes it disappear temporarily but it comes back

[@Ash_tree14]

If you plug the holes in the squishy ones with hot glue or something like it no water will be able to get and you won’t have a mold problem.

[@LocalratOG]

Why did you just cut it?

[@CrystalLiko]

Bluey is my fav show

[@k9999t]

me to❤❤❤❤❤

[@Lena-y7d6w]

If you jot glue the bottoms and the holes they will not get mold in them

[@Frutigerareo3330]

I'm happy that she didn't get rid of the bluey ones

[@ArchieCarter605]

omg the little fidget spinners! my cousin who is 1 has them!

[@EESlay]

When I was a toddler and took baths I just played with nothing

[@antoniofigueredo6865]

I played with the shampoo caps 😂😂😂

[@DaphneStrawberryEagle0966]

I made✨Potions✨ @@antoniofigueredo6865

[@elenagoitescu5228]

One question WHY DID SHE CUT THE TOYS

[@dragonire_dino0856]

Because it's better to ruin the toys then let her kid play with toys that had fucking mold in it.

[@babyyoda6537]

@@dragonire_dino0856you dont need to swear

[@souln.]

Great now how are you going to check for mold

[@UrlocalMayfieldGurl]

Why cut it open when there’s mold in them after you do it yet they can’t play with it again

[@salilsh]

I had the squirt toys when I was little so I was playing with them and I said to my mom what are these black flakes in the water and until I squeezed them out in the sink it was mold and so I still kept them but the just need a good clean8ng and a dab of hot glue

[@northcarrot6994]

Must be nice , my shower has mold tendrils crawling way up the tiles, the mold is just my buddy now

[@HannahMyers-ps4es]

Thank you for keeping bluey and bingo

[@nicoleburns3447]

I bet he’s gonna love it😊

[@420Alrighty69]

When I was a kid my mom used to just throw us a cup to play with lol.

[@JoshuaNull-ev4oc]

Love it 🥰

[@Funnytimes-nf7fr]

Ok when I was younger I only had two Barbie’s and Tupperware containers your child is LUCKY

[@Crazier222]

WHERE DID YOU GET THE BINGO AMD BLUEY ONES

[@SammyLawrenceLover]

How do you fix them???

[@lb2799]

Put glue on the holes so they do not get mold in them.

[@fluffymango3473]

...she cut them open to see if there was mold... the first one there wasn't...but now its pointless because she cut them open...

[@lilxx872]

When I was young I used to have those and I could clearly see the mild but I thought it was normal and I always put water in it and drank out of it 😭😭

[@BDB101SB]

Even the squirt toys in chlorine pools get moldy. Its not always mold either sometimes its mildew! Hot glue the holes shut or fill the hole with resin and cure it. Or alternatively you can fill them with a safe cleaner after the bath shake em up real good then empty abd squeeze them for a while to help dry them out. Its a lot of work but i love doing it for the kids at the pool i work at. They like to shoot the water about and ill be damned if j take that away from them tbh lol

[@matildahombsch]

tip..: BEFORE YOU PUT NEW TOYS IN THE BATH HOT GLUE THE HOLE SO NO WATER GETS IN

[@Taragoola]

My aunt gets squirt toys but doesn't put them in the bath for my baby cousins, instead she puts stuff like foam letters in it

[@eft6775]

Drill holes in bin for drainage

[@angeliqalien.]

used to have these types of toys when i was a kid except they were rubber ducks.. ngl the mold coming out of the bottom looked like takoyaki flakes

[@SADIE_SKINCARE]

people who thought that she said gold not mold 👇🏼😭☹️😎

[@Astheticgirl.101]

Litterly no one

[@elizamazinglife]

@@Astheticgirl.101 your right

[@Cami-s9d]

like no one and stop begging for likes :/