Cleaning some Scrap Copper dryers to get Clean #1 Copper

  Рет қаралды 6,248

Okie scrapper

Okie scrapper

Күн бұрын

Пікірлер: 31
@stevecole366
@stevecole366 2 жыл бұрын
I have always put them in #2 and haven't had any complaints
@Okiescrapper
@Okiescrapper 2 жыл бұрын
I plan to check out 2 new yards in the near future, I will have to ask about them sure would save some time. Thanks for letting me know, and I hope others will read your comment
@stevecole366
@stevecole366 2 жыл бұрын
@@Okiescrapper I don't save a bunch up just sell them as I get them
@blount718
@blount718 2 жыл бұрын
Man I love the long videos! Especially on a Saturday when I’m not doing much. Thanks for education
@Okiescrapper
@Okiescrapper 2 жыл бұрын
Glad you like them! some guys like the short ones, I tell them to skip through it and make it short
@josephcormier5974
@josephcormier5974 2 жыл бұрын
Those are pretty easy to clean and they add up some what fast excellent video for the novice I enjoyed greatly five stars brother
@Okiescrapper
@Okiescrapper 2 жыл бұрын
yes, they are easy to clean, I get people tell me they just tossed them in with the shred. or dirty copper, you won't get rich from doing them, but they add up after a while
@ariesmariano4592
@ariesmariano4592 2 жыл бұрын
Very very nice ideas I like your video awesome
@Okiescrapper
@Okiescrapper 2 жыл бұрын
Thank you so much 😊 and thanks for stopping by
@shawnmartin1584
@shawnmartin1584 2 жыл бұрын
pretty big pain doing all the camera stuff but if its any consolation I appreiciate it. by the way when you do you smelting if its not to much trouble i would like to see a little clean up of your pour in the end to see a clean end result.. ? love your smelting with the home made blue forge means more to me than the propane one. love that you made your own. you could wind up with carple tunnel doing all those dryers. LOL. NICE profit on the last sell im impressed..! well worth the time spent. at 65 myself working for someone else wish I had picked your direction for money making you must have some good connections for product . thanks again young man. Shawn
@Okiescrapper
@Okiescrapper 2 жыл бұрын
yeah, the camera stuff can be a pain, trying to make sure that you keep what you are doing in the frame, and getting the angle right, It would be much easier with a camera person, but I don't think I could talk the wife into filming me for that long in the heat. I need to move the blue furnace over to the shade trees and melt what I can, so I can get a lot or two on ebay.
@robertmandigo7942
@robertmandigo7942 2 жыл бұрын
You might want to avoid cutting into the drying beads to much as the dust is very bad to breath, I don't remember what they are made of. Also when you use the aluminum bus bars you need to use an oxidation inhibitor paste, I found the one that we used at the power company on the internet, it is called Contax, CTB8Thomas & Betts Contax Oxidation Inhibitor, it comes in an 8 oz bottle and it was $12.75, probably more now. I use it on my battery posts and connections and found that the posts were just as clean as the day I put the cable on. Keep up the great videos and God bless you and your family.
@Okiescrapper
@Okiescrapper 2 жыл бұрын
found this one on Amazon www.amazon.com/dp/B000BOCBCA/ref=twister_B06XWR6B34?_encoding=UTF8&th=1
@tcltrains.4552
@tcltrains.4552 2 жыл бұрын
Did a scrap pick up today, was told it was just a washer and dryer, Ute and trailer load of aircons later still have to go back for more.
@Okiescrapper
@Okiescrapper 2 жыл бұрын
that's the way I like it, I find most pickup's they have more then they tell you, I ask if they have a truck load (big or little truck) truck and trailer load (big or little Trailer) and do I have room to turn the trailer around, Google Maps is a great tool to see their yard
@michealklonowski5267
@michealklonowski5267 2 жыл бұрын
nice job, of it.
@joshp6061
@joshp6061 2 жыл бұрын
Those tubes come from dryers? Never seen them before, what are the beads for?
@Okiescrapper
@Okiescrapper 2 жыл бұрын
no the tubes are dryers, from freezers and fridges, to pull any moisture from the system, you can buy some dryers with beads for an air supply system to get any moisture out of air lines for say running a plasma cutter
@michealklonowski5267
@michealklonowski5267 2 жыл бұрын
question for you what are those beads made of do you know ?.
@Okiescrapper
@Okiescrapper 2 жыл бұрын
I am not sure what they are made of www.titusco.com/equipment/dryers/boge-desiccant-air-dryers/#:~:text=Desiccant%20air%20dryers%20use%20two%20desiccant,These%20dryers%20produce%20an%20uninterrupted%20stream&text=Desiccant%20air%20dryers%20use,produce%20an%20uninterrupted%20stream&text=dryers%20use%20two%20desiccant,These%20dryers%20produce%20an
@bigredbullion3883
@bigredbullion3883 2 жыл бұрын
Great video...I got tons of these
@Okiescrapper
@Okiescrapper 2 жыл бұрын
thank you, they can add up fast
@campervan-john
@campervan-john 2 жыл бұрын
I think hobbyist band saw eould be handy in the work shop for doing jobs like that
@Okiescrapper
@Okiescrapper 2 жыл бұрын
a bandsaw may work wonders, I need to get a base for my Porta band
@michealklonowski5267
@michealklonowski5267 2 жыл бұрын
are the platinum or pladium.or what.
@Okiescrapper
@Okiescrapper 2 жыл бұрын
copper
@SilverScorpion
@SilverScorpion 2 жыл бұрын
Great video
@Okiescrapper
@Okiescrapper 2 жыл бұрын
Thanks for the visit
@leonidkantanovich6725
@leonidkantanovich6725 2 жыл бұрын
Лайк🙏💕🙏💕🙏💕🙏💕🙏💕🙏💕
@billjunking_fool5549
@billjunking_fool5549 2 жыл бұрын
👍🙂
@Okiescrapper
@Okiescrapper 2 жыл бұрын
slow but they add up. I did another lb. of them latter total had about 5 lbs. of #1 & #2 I may have to save some for another video 6 months from now. got to keep them fresh for the new guys
Cleaning some Scrap Pressure Release valves for Clean Brass
32:22
Okie scrapper
Рет қаралды 4,4 М.
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
#1 or #2 Copper?
4:36
Always Buying Scrap Inc
Рет қаралды 138 М.
ABSOLUTELY HUGE Magnetic Induction Heater! Using 100 Spinning Neodynium Magnets And A Bucket
9:50
Taking a Small Load of Scrap Metal to the Scrap Yard Today
8:44
Okie scrapper
Рет қаралды 1,2 М.
DIY Copper WIRE Stripping Machine | Fantastic
19:43
King of Copper
Рет қаралды 4,1 М.
Cleaning up some Scrap Aluminum Copper Radiators to get that Copper
22:13
Aluminum tops scrap out
11:39
Rooster Scrapping
Рет қаралды 4,8 М.
Turn An Old Car Tire Into A Brilliant Creation You Need To See
15:28
Alva Welding
Рет қаралды 1,3 МЛН
Easiest Way to Clean Scrap Brass Valves
5:59
mbmmllc
Рет қаралды 30 М.
CLEANING COPPER  With Vinegar & Salt !!!
10:02
Freeisbetter86
Рет қаралды 87 М.