Clever Handyman Inventions

[@bawdydog176]

A nice range of "that's useful", to "maybe in a pinch", to "why on earth?". Mostly the last.

[@diytoptricks]

It's amazing to see how simple tools can turn into clever solutions for common problems.

[@fix135]

Some very clever ideas, some more trouble than buying a ready made product.

[@JoepKortekaas-l4q]

Not some, nearly all of them!

[@sofiardz2801]

🙄😳 jamás entenderé ese afán de algunos hombres de echar a perder algo útil para arreglar otra cosa

[@thomasnewton2935]

If I saw somebody on my crew trying to use half these tricks, I would fire them. Most of these are pointless.

[@massadel]

Вероятно Ваша команда делает работу для которой эти трюки бессмысленны. Другой команде для работы эти трюки подойдут.

[@adamb89]

"How to ruin the wrong tool in order to do the job that right tool could've done properly." Although pre-cutting screw threads in a headless bolt isn't a bad idea, to be fair. Although I've only ever done that to REMOVE a bolt that had the head shorn off, not screw in a stud bolt.

[@DYI]

Yes, you can make do with the wrong fastener or tool, but it is always better to have the best tool for the job. I never regret getting the proper tool.

[@TheDioblo2345]

funk FPV needs to review these

[@masterQ20]

You’re doing great! You’ve done a great job!

[@georgelabottum7448]

The thing with the wrench. I would probably just use my hammer. It already has this thing on the other end for pulling out nails. Try it. It works even better than destroying a perfectly good wrench.

[@ReroutedYearAD]

What's the point of the first one? The second one, can save time, money, and materials and just buy a pin remover, or use a screwdriver as many have done before. Then even further on it, just buy a paint mixer. Third one, cool, you put a cross cut in a section of bolt to screw it into some soft wood... that does nothing but have a chunk of metal in the middle of a piece of soft wood. Fourth one, yay! You bolted some white to some soft wood so that you have some wire bolted to some soft wood to yank on. Here's a "hack," tie some string to the head of a broom so you have some string tied to the head of a broom to yank on. And on, and on, and on, and... use a plastic bottle on your indoor faucet to fill the bucket? Yeah, having a bottle with water inside left hanging on your faucet is much more practical than buying a faucet that has a nozzle on a hose, screwing a hose to your faucet if you don't have that but have a threaded faucet, or, you know, using an outdoor faucet, your shower head, or your bath faucet. 'Here, law nails on a board, burn the board, and you fixed the problem with your AC unit!' What is that "hack" even supposed to be used for? The nail through cardboard, for people that lack the mental capacity to hold a nail. Just just using an angle grinder to turn a wrench into a limited range cat paw for people too stupid to use the claws on their hammer or cat paw.

[@snapfinger1]

Lucky you. Make shift tools are strictly verboten in the shops where I’ve worked.

[@SuperViral1]

Great video

[@JumpingJax100]

My take away from this video is: You don't always have to hammer the nail into a board. You can also hammer the board onto a nail!

[@ralphllivrah9551]

I hate seeing someone turn a twenty dollar tool into a five dollar tool.

[@trystdodge6177]

That trick with the concrete also works with my wife's vibrator

[@zerosen2141]

there are more than a few of these that are down right clever. Then there are some that.... The tools used to make the "Handyman Invention" cost more than the invention itself, and if you have the tool to make it, you should already have at least 2 of the tool you're trying to replace. (or in the case of the wire strippers, a knife already in your pocket)

[@stevebezfamilnii2069]

There are few that that known, like drilling wooden plank with plank underneath, but rest of "inventions" is downright awful. Why do anyone would need to attach box cutter to a plank if you can use it right away without any issues.

[@TheMonocledNut]

I survived almost 3 minutes watching this. And now you owe me 5 minutes of my life back.

[@Waldee84]

I've waited 5:30 hoping for one reasonable/useful thing but I gave up.

[@AristotelisPhilippakos]

@@Waldee84 Ive waited 7:40 and have so far seen ONE almost useful thing, not a single one of these are "clever" their are downright obvious or just stupid.

[@sharkins8696]

even after 4mins, just bad or dumb ideas, or common things any idiot could think of

[@davidrichter9164]

I see the "God's gifts" to everything are here.

[@jubab69]

Its cool but its not practical since buying the tools from a hardware store is much better.

[@максиммаксимов-и9д3ц]

Есть хорошие идеи, но большинство абсолютно бесполезных идей

[@ВасилийСандалов-л6ж]

Это не идеи это смекалка. Когда нужно что-то сделать, но нечем, а времени ехать в магазин нет. Сам так часто работаю.

[@DickNemakas]

Homeowner ideas in a pinch..

[@darkwolf4049]

Ok SOME of these are actually pretty smart

[@Adamkami123]

The coolest thing for me is the foam bottle 👍👍

[@Mr.inventor]

Thx

[@kosinale]

2:02 I could have used this one like a week ago!!! OMG!!! THX!!! 🤣

[@vicvonarab9518]

Ролик наводит на мысль - как часто выбор человеческий, балансирует между мудростью и запредельной глупостью.

[@denverycool2218]

Он просто совсем почти не конченый

[@demonlordotrt754]

Hay if it's stupid and it works was it ever really stupid?

[@_Nikolai_N]

@@demonlordotrt754 эй, если ты умеешь писать и читать - это не говорит о том, что ты умный. ИМХО

[@malenkysanyab1652]

@@demonlordotrt754 тогда заточки сверло с помощью идеи в данном видео.Надеюсь, останешься цел.А если нет, тоже неплохо)))

[@splinterdevilblood6366]

Using a disc grinder as a pencil sharpener wtf. This was interesting but it’s way safer and cheaper to just get the tools you need.

[@c431inf]

Great stuff , but recommend turning off sound

[@jamesgarrett6848]

Now i know how to cut up all my snap on wrenches so i can pull nails....that damn hammer is just outdated!...and dad gummit i knew there was a better way than them extremely cheap and easy clothes pin!!....this stuff is hilarious!

[@greasylimpet3323]

Do you know that there are ready made bits of steel with threads and screwdriver slots? I think they call them screws.

[@brettbretterson6062]

Every one of these is the harder, stupider, more expensive way to get the job done👍

[@davidrichter9164]

You are too.

[@BrunodeSouzaLino]

In all those videos I keep asking myself: what if I don't have an angle grinder? And in many of those, the angle grinder you need probably costs more than the correct tool you should be using instead of those hacks.

[@michaelunderwood5138]

Creativity is the staple of a true handymans skills. Certainly i could assume that there are affordable options available.

[@Kefka2010]

@@michaelunderwood5138 You mean more affordable options that are made to directly address a problem? These things require you to use tools to alter tools to change their given purpose...why?

[@michaelunderwood5138]

A true handy man will have the correct tools to make the job easierand faster. Creativity is a staple in a hanymans arsenal. No matter what he will build or get what he needs if he doesn't have it. In a pinch you should never modify how a tool is designed to work it could cause damage to the job or could cause injury to persons or operator.

[@dosatkeysbeats]

For everything I've seen in this video a patented tool or part already exists

[@BrunodeSouzaLino]

@@dosatkeysbeats And those probably cost less than the angle grinder you need to to all of these hacks.

[@MrTrak15]

У меня мозг поплыл! ((( 3:45 конечно!!! Мы ж прищепку на кисточку прикрутили! Хотя могли и жестянку, но это не про "гения" автора😂

[@ИгорьКарпенко-к4х]

Вот не понял ваще, зачем болт без шляпы было в бревно тасовать, и и на деревяке гвозди палить,

[@lopi44]

Гвозди на деревяшке, типо узор. Про болт тоже не догнал

[@MAKAR_3.14]

О, сколько нам открытий чудных готовит интернета дух... И Ютюба иже с ним... Не перестаю восхищаться полётом фантазии мастеров-фломастеров! Хотя, конечно, некоторые идеи очень даже ничего. Например, как на банку с краской напялить обрезанную бутылку.

[@howardullom2683]

Everything on here they make an actual inexpencive tool for that job that will work better than what you made!

[@randysmith839]

Some of these are really neat. Some of these are ridiculous. And it seems like, as the video went on, the neat ones stayed the same level of neat, while the ridiculous ones got more ridiculous. I'd be concerned, but I'm pretty sure it was on purpose.

[@ericdeaton2247]

As a professional handyman with a successful handyman business, it is safe to say that I would use zero of these tips.

[@Waldee84]

Exactly. I'm not handyman but I agree.

[@ArmchairDeity]

Funny I just came into the comments to say that for once, for my own home shop, there were one or two that gave me some ideas… lol… none of them as-is, but a few good source ideas… 😂

[@BullScrapPracEff]

As an amateur handyman. I have to completely agree.

[@MrAranton]

I don't know. Cutting up plastic bottles to use them as cheap disposable funnels isn't that dumb if you need to funnel things like paint or glue that would effectively destroy the funnel (or be too much effort to clean off the funnel). Not sure how often you actually need to funnel such liquids, though.

[@jonathandoe5290]

Lol I bet all you guys, when you don't have the right tools you just stand around with your hands in your pockets, your useless without the proper tools lol

[@ssnerd583]

HOW BLOODY MARVELOUS IS THAT?!?!?!?! BRAVO!!

[@ИванИванов-у6й4г]

Теперь я знаю, как выглядит творческий пОнОс...

[@yashwantchogale6455]

0ⁿ

[@antonioloretobeccoi3904]

Booo

[@pedrovinagre2542]

Ok

[@СлаваМисюра]

Забивать гвоздь держа картоном норм. Пальцы целые

[@domingoangelchaupena-xe3vx]

Muchas felicidades te deseamos desde Sta Clara los que te queremos mucho y los demás

[@davidhoward496]

How to use expensive tools to make junky replacements for inexpensive tools.

[@Alex-xo4lj]

Мне особенно понравился гаечный ключ 6:20 🤣

[@sayochikun3288]

Some of these are like "do you want to do this? Just do the first thing that comes to mind" as expected

[@Bo0mber]

5% well-known old tricks 95% awful garbage 100% brain rot

[@meovatthinhan]

cám ơn bạn đã chia sẻ nhé🥰🥰🥰

[@kevinmoore7213]

The chain being used to make half circles made me laugh. I mean, really? How is that anything.....

[@alexkrapy]

Пир новаторства и наставничества! Накрыть банку с краской пищевой плёнкой - вот мой фаворит на премию "Фейспалм" в номинации "Сантехник Афоня втирает молодым за культуру производства". :)))

[@humanityeliteschool9407]

тоже мне фехтовальщик нaшёлcя

[@maksim_sid]

Совсем неудивительно, что у этих людей не хватает ума на поход в магазин))

[@TieraRoot]

Но, при всём этом, такие каналы имеют почти по миллиону подписчиков:))) С этим миром явно что то не то...

[@ReroutedYearAD]

@@TieraRoot Welcome to the age of ignorance. We're little more than 5,000 years in, a little less than 427,000 to go.

[@Tom-hz9oc]

They’ve never had to improvise and adapt. They’ve always had everything handed to them on a silver platter.

[@jonathanryals9934]

I can't wait to show off at work tomorrow. I am leaving my box-cutter at home and bringing a pizza-cutter instead!

[@СергейМаксимов-э4т]

Самодельщики соревнуются ,кто придумает идею поупоротей.

[@ВалерийНетребин]

Молодцы ребята.

[@flaymer8904]

Да да да!!! Типо рекламы Инстаграм .негритянки с зубами как у коней и протэзом со стращами. Как это все паяет.....,,?;!!!

[@MrTimothy87]

That was dope..I have this feeling to go build something now..

[@Billmull8622]

All these crazy ideas and he uses a pizza cutter to open a box lmao

[@franciscovilanova8279]

Tendría que inventar algo para no arruinar la morza con la amoladora.👍👍👍

[@Stefan_Smith]

The father I've never had!

[@knobsdialsandbuttons]

MacGyver is this you ?........

[@dannyboy7289]

I love the combination of dangerous and stupid

[@jewellerydesignerartists9353]

Amazing work ❣️ Have a great day 😊

[@ЮраШев-л9с]

Порезать гаечный ключь для тогл что бы доставать гвозди 🤓

[@chellappasakthivel5782]

It’s great and very useful

[@otmarna9292]

Genial. Da ist für jeden etwas dabei.

[@andrewkline]

The pizza cutter on the cardboard.. 💀

[@fiddye1689]

I question the safety of the angle grinder stand

[@snotshovelinfection305]

You managed to make a bunch of junk nobody needs cause it's either extremely dangerous or just WHY when I already have tools that do that job

[@kinowitanfurniture7528]

Terima kasih, semakin menambah wawasan👍👍👍

[@Fede81671]

Le saca la punta al lápiz con la amoladora que animal jaja

[@supernxtural432]

All you need is an angle grinder!

[@YupYupIWin]

If this is the work of your handyman, fire him immediately...

[@300and2CI]

Personally I find it more cost-effective to just buy the purpose-built tool or whatever, but if I ever wanted to stop making money as a contractor running my own business and just do meth all day, I'm sure I'd LOVE all of these solutions to problems I don't have or can solve easier in a lot less time 🤣🤣🤣

[@АндрейЕфимов-щ8я]

Безумец в мастерской !

[@VincentVelilla]

Bravo vous êtes le roi du bricolage Peu de commentateurs ont compris et prétendent qu'il est plus simple d'aller acheter l'outils spécialisé , sauf si le magasin est à 30km ou si vous avez un accident sur la route . Mais de toutes façons il est impossible de posséder tous les outils du monde

[@mang4260]

Compris quoi? Le gars massacre plus d'outils et de matériel en une seule vidéo qu'un stagiaire qui n'a jamais touché un outil de sa vie. C'est juste une blague. Il n'y fondamentalement aucune idée réellement utile ici. Et la théorie du "posséder tous les outils" n'a aucun sens: il utilise littéralement plus d'outils pour en créer d'autres qui ne sont pas plus utiles que les outils de base qu'il a déjà.

[@damienreisner2183]

Can't imagine what this guys house must look like

[@edison7300037]

some are good tips and still commonly used by carpenters, but most tips are absolutely redundant, you might as well use the proper tool to fix the problems instead of try being Macgyver.

[@Nestor11962]

У меня создалось впечатления, что идеи тебе приходят быстрее, чем ты их успеваешь снять на камеру, даже если они бесполезные.

[@MADExCLEARxMEDIA]

Whenever you feel that you have to spend thousands of dollars to get the job done, remember the creativity and ingenuity you seen in this video and remember, it's 2022 and no one knows how the pyramids of Egypt were built, yet they were built 4,500 years ago. To the creators of this video, keep up the good work!

[@205Raven]

Chain Wingnut tool was best. Great for damaged heads. Plastic bottle over pain can seal, runner up. Together they are good enough to forgive that pizza cutter box opening. Lets just never speak of it again. lol

[@ramirozopi1603]

Unir 2 lineas de acero inoxidable con dos tuercas es inútil ya que a la hora de aplastar las tuercas tienden a partirse 😞

[@cdcdogs4961]

I just ❤ ingenuity! 👏🏼😎

[@re-fix9678]

Good❤

[@ArmchairDeity]

For once one of these “shop hacks” videos had a couple hacks that at least gave me an idea for something related…

[@bascuthach]

came here for the thumbnail, could not find it

[@halloweenfan3496]

9:32 There’s these things called fingers.

[@michaelunderwood5138]

Take into account that all these should be done only in a pinch when you don't have the proper tools to get the job done some of these are down right redundant like the nut and bolt parts. 25 dollar set of wrenches.

[@OldSkaterGuy]

Most of these are a waste of materials, time, and effort.

[@rambo8863]

7:55 i dont have trust in that soddering, the sodder is on top of the wires. Mayby it need more flux

[@ГерманХарчев]

Видео о том как из ненужных вещей сделать ненужные вещи

[@malenkysanyab1652]

При этом про...бать время и ни...уя не понять)))

[@MWL_-jo3nf]

1:58 did he just open a damn box with a fu*cking PIZZAROLLER???!

[@AYMAN_MKY]

Very nice, good luck and continued success, my friend

[@colinwar]

it's the weird part of this server thing, but It's okay with me.

[@la_engineer]

1:57 now I know how to open a package and I can throw away my knives and scissors :D

[@mrsky1451]

Amazing video

[@BHK_DIYAtHome]

good idea

[@rodr]

Genial Muy chulo Gracias

[@thanhtamtv78]

Video rất tuyệt vời .👏

[@thecriticisnonsense2743]

Прищепка просто супер! Долго думал над этой конструкцией гений?

[@vavanvavan5619]

Ибо нех

[@ФёдорБорисенко-т9в]

Автодрочилка ему нужна

[@eigenemeinung7988]

Warum sollte ich aus einem Stichsägeblatt und nem Scharnier eine Handsäge bauen? Wenn ich so ein Sägeblatt zu Hause habe, dann nur, weil ich ne Stichsäge besitze. 🤣

[@ericbailey4641]

Im soo excited to try some of this

[@Arhont_forever]

Глядя на это с ужасом понимаешь как деградирует человечество. 🤦‍♂️ Радует то, что не все настолько дятлы.

[@adindavitaliachanel4424]

Kreatif banget😊

[@dumymariposa6795]

1:54-That's pretty much muscle memory for most men, amiright?🤫

[@SyberSqueegy]

@ 08:50 What a COLOSSAL waste of printer ink!!

[@Urbos13]

These are modifications, not inventions

[@serbakreatif]

Nice sharingnya🙏🙏 yuk ☕☕👉👉

[@tedrowland8672]

You know what? All these inventions made by handymen are pretty clever

[@massadel]

3.56 не все. Когда инструменты засовывают и вытаскивают из за двойного провода рука задевает за деревяшку об которую можно занозить руку.