Clio 200 - Snetterton 300 05/04/22

  Рет қаралды 1,282

Liam Pauling Racing

Liam Pauling Racing

2 жыл бұрын

Fastest lap from the day and one of the only traffic free, becoming one of my favourite tracks, lots wrong with this so can't wait to get back.
Clio 200
AR1
AST5100
Gripper Diff

Пікірлер: 11
@stephenemms4834
@stephenemms4834 2 жыл бұрын
Your car always seems planted. Other than the AST5100 and AR1s do you have any other mods? Poly bushes? Negative camber and have you fitted any shims to rear to change ‘toe’ settings ? Thanks… just bought one so learning from others more experienced… thanks!
@liampaulingracing
@liampaulingracing 2 жыл бұрын
Maybe due to 5% technique 😉 But on the setup it’s been lots of trial and error however the short answer is x85 cup racer base setup. Currently got as much camber as I can get on the front with the top mounts slightly slotted giving me about 3’10 and 2’5 from memory on the rear (pure motorsport shims) Along with the geo I have found spring rates to be super important but depends on the suspension. With the AST’s I run 80Nm on the front and 100Nm on the rear which is perfect for me (most would find it too aggressive for average track car) Quite a few use Gaz Golds but with an inverse on the spring rates (no idea why it works) Lots of info on the clio197.net forum.
@stephenemms4834
@stephenemms4834 2 жыл бұрын
Thanks Liam, don’t mind aggressive… used to rally an Astra on Gravel!! Will take on board your suggestions.
@ClioManFuz
@ClioManFuz 2 жыл бұрын
what exhaust system you running mate? ive always had noise issues at snett
@liampaulingracing
@liampaulingracing 2 жыл бұрын
Standard manifold with full akrapovic system, never had any problems, normally around 80db on static.
@haydenoliver9542
@haydenoliver9542 2 жыл бұрын
How much of an improvement did the gripper make
@liampaulingracing
@liampaulingracing 2 жыл бұрын
3s with easily another 3+ available with the right driver 😅
@haydenoliver9542
@haydenoliver9542 2 жыл бұрын
@@liampaulingracing sounds good to me. Think I’ll stick a lightweight flywheel in at same time. How long did yours take to come.
@haydenoliver9542
@haydenoliver9542 2 жыл бұрын
@@liampaulingracing which one did you go for
@liampaulingracing
@liampaulingracing 2 жыл бұрын
@@haydenoliver9542 Late last year it was about a weeks lead time for memory, I have the tarmac race spec, it’s very noisy on the road but amazing on the track
@haydenoliver9542
@haydenoliver9542 2 жыл бұрын
@@liampaulingracing thanks for the help 👍🏼 car is not road legal so no issue there, more noise the better 😬
Goodwood 29/11 Clio 200 vs M3
3:36
Liam Pauling Racing
Рет қаралды 2,2 М.
2024 Trackday Championship TDC - Ford Fiesta ST150 - Snetterton 300
21:34
艾莎撒娇得到王子的原谅#艾莎
00:24
在逃的公主
Рет қаралды 28 МЛН
Joker can't swim!#joker #shorts
00:46
Untitled Joker
Рет қаралды 29 МЛН
Inside Audi's Massive Recycling Factory in Europe
18:45
FRAME
Рет қаралды 13 М.
Fender Stratocaster | Old Guitar Restoration
54:58
Rusty Restore
Рет қаралды 33 М.
Porsche 992 GT3RS - Nurburgring Nordschleife
6:59
RMA Track Days
Рет қаралды 1,7 М.
Brands Hatch - Clio 200 vs Yaris GR
1:27
Liam Pauling Racing
Рет қаралды 15 М.
F1 Edition | Dude Perfect
23:48
Dude Perfect
Рет қаралды 2,5 МЛН
1400cc DIESEL MOTORCYCLE BUILD / FIRST RUN ENGINE. PART 2
48:35
BelarusCustoms
Рет қаралды 33 М.
Castle Combe - Clio 200 - 12/07/22
1:26
Liam Pauling Racing
Рет қаралды 1,8 М.
Brands Hatch - Clio 200 - 56.65s
1:08
Liam Pauling Racing
Рет қаралды 1,1 М.
Brands Hatch Indy - 26/02/24 Clio 200 - 54.95
1:25
Creed Racing #23
Рет қаралды 457
Не поверил, что это робот | Robot Prank
1:00
Robot Vall | Валерий Робот Вэлл Черновский
Рет қаралды 1,7 МЛН
Kind Grandpa Eats Candy Skewers and the Funny Ending #shorts
0:35
Ăn Vặt Tuổi Thơ
Рет қаралды 9 МЛН
Try Not To Laugh Part 355
1:00
Ibal Muhammad
Рет қаралды 20 МЛН