Thanks for this video. I would appreciate if I could have a bit of clarification regarding the adjustment the values of the Garment Fit Properties. I notice in the video the that speaker says to "lower the percentage value for very stretchy fabrics....and then to you should raise the percentage value for non-stretchy fabrics". However, this directly contradicts what Clo communicates in its "CLO Garment Fit Maps Guide" pdf. On page 8 of the "CLO Garment Fit Maps Guide" pdf it states to "raise the percentage value for very stretchy fabrics and to lower the percentage value for non-stretch/low-stretch fabrics". I would greatly appreciate if Clo would advise which information is correct....the information from the speaker in the video or the information from the pdf.
@CLO3D Жыл бұрын
Hi Julian. I have forwarded this question on to our Fabrics team. Will let you know as soon as I have received their reply
@jennypflanz7073 Жыл бұрын
I am wondering the same thing. Did you get a reply?
@igiboy9714 ай бұрын
Did you get a reply?
@MADEApparelServices2 жыл бұрын
Still having a hard time understanding the basic difference between stress and strain. Is it safe to say stress is more about positive ease when dealing with the fit of woven garments and strain is more relevant to knits where you would be working more negative ease and compression?
@CLO3D2 жыл бұрын
Have a look at this to see if it helps. support.clo3d.com/hc/en-us/articles/360052622933-CLO-Garment-Fit-Maps-Guide
@MADEApparelServices2 жыл бұрын
@@CLO3D Yeah, I've reviewed those and the manual and I'm just not wrapping my mind around the differences. For example, it says that the stress map " displays the force per unit area in kPa applied to a garment by external stress". What is external stress? Is that movement of the body such as bending or sitting? If so, how is that NOT the fit map? I just looking for a simple real world explanation for each map along with an idea of when to reference one over another. Thank you,
@madihajabbar20012 ай бұрын
@@MADEApparelServices Stress is force on the fabric. This force is exerted due to being worn on the body, and body shape exerts this force. Strain is change in length or deformation in fabric due to exerted force.
@MdShydurRahman Жыл бұрын
thanks you, it is very helpful. if possible share another video for different type fabrics.
@CLO3D Жыл бұрын
We are so happy to hear that. This video knowledge can be applied to all different fabrics :)
@brahamdutt6664 Жыл бұрын
Do I need to know Maximum Stress-Strain of my fabric? Can't the software automatically know it from the physical properties if I am using the Clo Fabric Kit?
@CLO3D Жыл бұрын
Correct. CLO will know if you use the fabric kit. But you will still want to turn on the stress/strain maps to check if it is fitting properly or is too tight. Since fabric cannot "rip" in 3D the fit maps allow the garment to "speak" to you like a fit model would
@brahamdutt6664 Жыл бұрын
@@CLO3D That I understood, but what I didn't get is why I need to manually enter the maximum values for stress and strain in the fit properties dialog box.
@CLO3D Жыл бұрын
@@brahamdutt6664 Those should already be entered when the fabric is digitized with the fabric kit
@CLO3D Жыл бұрын
But if we are still not answering correctly please either reach out to your CLO representative directly is you are an Enterprise Client. Or if you are an individual please post to our community forums which will allow you to add visuals to helps us assist more
@kaopanha50903 жыл бұрын
could make other video for adjusting solution?
@CLO3D3 жыл бұрын
Did you check for a solution in our forums? support.clo3d.com/hc/en-us
@kaopanha50903 жыл бұрын
@@CLO3D very useful thank you
@CLO3D3 жыл бұрын
@@kaopanha5090 Great!
@kazuyo_3dbagdesigner2413 жыл бұрын
Thank you, Very informative and helpful instructional video
@CLO3D3 жыл бұрын
You are welcome.
@DiegoSynth Жыл бұрын
10:20 "When working with very stretchy fabric, I need to actually lower the KPI". Everything becomes trivial from the moment you manually change these values to fit your pattern and materials. Unless I'm getting something wrong here, you are basically cheating!
@CLO3D Жыл бұрын
Changing the KPI entails understanding your RL fabric, knowing it's KPI and editing in in CLO. No faking it, but rather knowing the correct data and applying it.
@DiegoSynth Жыл бұрын
@@CLO3D Thanks for the answer. I understand, but I believe the average designer Joe/Jane does not usually know the physical behaviour / chemical material composition in numbers. That being said, I didn't realize I was commenting on an official CLO tutorial and I proceed to turn my criticizing into an apology and compliment for giving the software this level of flexibility.
@CdeeqFilmmaker2 жыл бұрын
How do you export strain map and or stress map out of clo ?
@CLO3D2 жыл бұрын
It is only possible to take a snapshot of the 3D window.
@matthewmounsey-wood52993 жыл бұрын
Great tutorial! Thank you :-)
@CLO3D3 жыл бұрын
You're very welcome!
@EncoderFashion3 жыл бұрын
Thanks it’s useful love it❤️
@CLO3D3 жыл бұрын
You’re welcome 😊
@SC-ck8pb3 жыл бұрын
Please share files.
@CLO3D3 жыл бұрын
Not all lessons come with an accompanying file. Rather the technique should be applied to your own design.