Club 500 RC boat build

We are taking on a boat build! So I’ve never built or raced a boats and figured let’s video it. This club 500 ghost was a pleasure to build. The instructions do help although some cuts are a little tricky to pull off. But the key points I learned are, always TAKE YOUR TIME!!!!! Check your measurements and keep test fitting the parts. When gluing the deck to the hull use neodymium magnets either side of the plastic to hold it in place. The gorilla glue works amazingly and still holding up to this day. Obviously, if that changes I’ll let you guys know, but what a wicked little build this was here’s where you can get all the parts from. Thanks for watching.
The boat kit:
www.club500slipway.com/ghost.php
The ESC: ISDT RC Electronic Speed Controller,ESC70 WP 1080 70/120A Brushed Motor Electronic Speed Controller,Smart ESC with Brake Waterproof for RC Car 1:10 1:8 Model(2-3S LiPo/6-8S NiMH) amzn.eu/d/97LffWD
The transmitter/ receiver:
￡13.34 46％ Off | Flysky G7P RC Transmitter and Receiver R7P FS-R7P 2.4Ghz for Crawler Truck Car Boat Robot
a.aliexpress.com/_mruYDDK
Servo:
www.fusionhobbies.com/product...

[@daddyclubrc]

That's a pretty cool boat, almost a yacht size to your Orlandoos... You need a trailer to pull it behind an M01/M02! 😂😂😂

[@mikesmancave5505]

I like that idea 😆

[@daddyclubrc]

@@mikesmancave5505 I figured you would like that! I made mine from some scrap metal channel from I don't know where, some strips of bamboo as runners, and the hitch assembly is from some pretty hard aluminum that I drilled out and then filed to shape... You could use that milling machine to make your awesome though!

[@maartenzeeful]

Well done Mike, respect

[@jemlittle1787]

Prison spec RC lol