CNC Plasma Cutting and Fusion 360 design

[@scottgregory-tims6852]

You guys are great!! Thank you for spreading the knowledge!!

[@rantiksadventure1920]

Thank you

[@jacobhargiss3839]

Thank you for the video, this is exactly what I needed.

[@LivingTech]

Very nice, thank you!

[@davidbroome6437]

Nice video , bad music takes away from teaching skills

[@twoguysmakestuff4445]

Thank you for the comment. We are always trying to make better videos and this helps! Thanks again!

[@jamescole3152]

I notice the first oval you cut out the torch goes right over the top of the cutout piece. My goal for the tool path is to never go over the top of a cutout piece.

[@TAMARbarCNC]

which plasma table do you have?

[@chrisTiFur76]

Hi there, great video!! Do you have a link to where the post processor file is please? Is it one you made yourself as I can’t seem to find anything anywhere. Thanks

[@twoguysmakestuff4445]

Check out our latest video about post process and creating tools in fusion360. We give info about that file. Thanks for watching! Post Process file, creating tools in Fusion 360 for CNC plasma cutting. Questions Answered! kzbin.info/www/bejne/bpDHm2OtgbV8iqc

[@bikerbrego]

I’m going to order a table soon. I just need to learn the fusion 360

[@twoguysmakestuff4445]

We have learned a lot about this one and what we would get for the next one.

[@bikerbrego]

@@twoguysmakestuff4445 I’m looking at the 4’x8’. Great videos. Any info would be greatly appreciated on this table

[@earlcousins6635]

What make plasma cutter are you using? Thanks.

[@twoguysmakestuff4445]

Hypertherm 45XP

[@kevinschilling6813]

that looks very close to the Wright Cnc plasma table...

[@twoguysmakestuff4445]

It is!

[@deanpurks7474]

Hi, What program are you using for post processing?

[@twoguysmakestuff4445]

We use a custom written file specific for mach3 and fusion 360. I’d be happy to share with you if you needed it.

[@musoangelo]

@@twoguysmakestuff4445 Do you know if it works with Mach 4?

[@twoguysmakestuff4445]

@@musoangelo I sure don’t. I’m sorry.

[@musoangelo]

@@twoguysmakestuff4445 No worries, thanks for taking the time to respond.

[@anthonypointon2844]

@two guys make stuff what program are u using to controll the cnc plasma

[@customsolutionsinc]

i see you offerd to share post processor, id be interested... Im not using mach3 but i think itd be a good starting point. my system "imitates mach3, sort of....lol"

[@twoguysmakestuff4445]

Yes I’d be happy to.

[@customsolutionsinc]

@@twoguysmakestuff4445 how do we do that on youtube?

[@twoguysmakestuff4445]

You can find my email address in the about section of our channel.

[@Hw3racing]

170 ipm! What psi? What amp? That’s screaming

[@twoguysmakestuff4445]

The hypertherm 45XP regulates the PSI but we feed it a constant 90psi and have it set to 45 amps.

[@robt9619]

No talk about post process ....

[@twoguysmakestuff4445]

We can do that for you!

[@robt9619]

@@twoguysmakestuff4445 That would be great!

[@qupation7296]

Hey what is this "post-processing" people are talking about in the comments here? Someone please explain... I'm new.

[@twoguysmakestuff4445]

It’s a file that we use to create the g-code for Mach3. Our latest video about post process covers this subject. Thanks for the question! Post Process file, creating tools in Fusion 360 for CNC plasma cutting. Questions Answered! kzbin.info/www/bejne/bpDHm2OtgbV8iqc

[@mitchmonnett468]

Turn down the music, I can’t hear you talk!

[@twoguysmakestuff4445]

Thanks for the feedback! We will.