CNC Projects That SELL!

I have compiled a small list of some top CNC design projects that sell well. I hope these porjects give you ideas to inspire some creation in your own shop.
Website: www.eigendesigns.com
Instagram: eigen_desig...
TikTok: www.tiktok.com/@eigendesigns?...
-------------------------------------------------------------------------------------------
Time Stamps:
0:00 Introduction
0:39 Bit Selection Overview
2:15 Millennium Falcon CNC Design
5:06 Puzzle Tray CNC Design
6:45 Whiskey Flight CNC Design
8:48 Shark Coochie Board CNC Design
-------------------------------------------------------------------------------------------
CNC Design File Links:
Millenium Falcon Serving Tray: eigendesigns.etsy.com/listing...
Puzzle Trays: eigendesigns.etsy.com/listing...
Whiskey Flight: eigendesigns.etsy.com/listing...
Shark-Coochie Board: eigendesigns.etsy.com/listing...
Video Specific Links:
Whiteside RD2100 ¼” End Mill Bit: amzn.to/3Hc3HgV
Whiteside 1372B Bowl Bit: amzn.to/3NOAYCM
Whiteside 1500 90˚Engraving Bit: amzn.to/4aFrH9V
Whiteside 11 Degree Bit: amzn.to/3S4ccAV
1 Gallon of Mineral Oil Finish: amzn.to/4aWaWaP
2" Drill Bit Sanding Set: amzn.to/48wsWXi
Set of 4 Glencairn Crystal Whiskey Glasses: amzn.to/3RIVjdJ
Millennium Falcon Porcelain Dish: amzn.to/3RHCLux
-------------------------------------------------------------------------------------------
Festool Equipment:
Festool Kapex Miter Saw: amzn.to/3GkzBZi
Festool OF 1400 Router: amzn.to/3Vp4aBh
Festool Rotex 150 Sander: amzn.to/3DZHdwD
Festool ETS EC 125 Sander: amzn.to/3payIcl
Festool Sandpaper: amzn.to/3nUzev7
Festool Dust Extractor: amzn.to/2Zvi9yB
Festool Domino DF 500: amzn.to/3Gu9DA4
Festool Domino Assorted Tennon Set: amzn.to/3FjPHhP
Festool TS 75 Tracksaw: amzn.to/3JVn4Ma
WoodPecker Equipment:
Woodpeckers Router Table Fence: amzn.to/3Y2PRUy
12” T-Square: amzn.to/3KcEZxY
32” T-Square: amzn.to/3T3aOgw
12” Stainless Steel Square: amzn.to/3SXqGB8
6” Stainless Steel Square: amzn.to/3K6OTB8
Stainless Steel Square Set: amzn.to/3QYR9wp
6” Stainless Steel Delve Square: amzn.to/3QGlznl
Stainless Steel Delve Square Set: amzn.to/3K6F9H2
CNC Accessories:
Drag Chain: amzn.to/3lPxymf
Makita Router: amzn.to/36OKxvs
1” Surfacing Bit: amzn.to/3n9koRC
¼” Juice Groove Bit: amzn.to/3FSZR9R
Whiteside RU2100 ¼” End Mill Bit: amzn.to/44Efnnc
Whiteside RD 1600 1/8” End Mill Bit: amzn.to/3pjgQzd
Whiteside 1500 90˚Engraving Bit: amzn.to/41VUWjO
Whiteside 1550 60˚ Engraving Bit: amzn.to/3Q8NpJD
Whiteside 1372B Bowl Bit: amzn.to/3WHjCdz
Equipment & Tools:
10” Combination Saw Blade: amzn.to/3o0c3i0
10” Rip Blade: amzn.to/2Zw55sF
JessEm Router Table Lift: amzn.to/3ALk2at
Bosch 2.25 HP Router: amzn.to/3Rwre0g
Bosch Offset Wrenches: amzn.to/3z28E8M
Fulton 110V on/off switch: amzn.to/3PorrR4
Craftsman Air Compressor Set: amzn.to/3kz3zhv
Countersink Drill Bits: amzn.to/3BuBE8G
13-Piece Spade Drill Bit Set: amzn.to/2UlBT5g
Titebond III Wood Glue: amzn.to/3BiUyzc
Titebond Original: amzn.to/3iqjBYp
Titebond Dark Wood Glue: amzn.to/3FToYd9
DeWalt Clamps: amzn.to/3BiC5Ti
DeWalt 20v Cordless Drill Set: amzn.to/36Oe9ck
Bessey 18” Parallel Clamps: amzn.to/3hOmdjC
Bora 40” Parallel Clamps: amzn.to/3itiGq6
Bessey Strap Clamps: amzn.to/3hkCJag
Microjig Push Block: amzn.to/3uPK2fT

[@EigenDesigns]

Congratulations to @aarong402 for being selected as the winner of the Whiteside CNC bit set giveaway! He will be receiving a brand new set of the 4 Whiteside bits I use the most on my CNC projects. I also want to thank everyone who left a New Year’s resolution in the comments. I was overwhelmed by the positivity and wholesomeness of the comments left by my viewers. Thank you for making this such a great, welcoming community. Stay tuned for future videos. I will likely do more of these giveaways in the future to help give back to this amazing community.

[@aarong402]

Awesome thank you!! I sent an email. Thank you again

[@diamond6256]

This is great. I love that you showed exactly what those bits were most used and what they do. Thank you

[@rickprince7506]

Thanks for sharing your projects, love them all. This year’s resolution is to slow down a bit and make more time for family. Spend more time designing and working on CNC projects that I really enjoy.

[@johnbaker7182]

Thanks for all the informative content that you put out. I have learned a ton from you. My resolution is to put more of yours and others info to work for me and my creations.

[@markfishburn8284]

Thank you for sharing your video. It was very helpful. I am new to the cnc world. I just got an entry-level unit to start learning. I am hoping it will make a great addition to my shop and what I can do.

[@j.zamanma1312]

Hey Mark, Congrats on 20k subscribers. I took most of 2023 away from woodworking and CNCing so my New Year's resolution is to get back into the shop more this year.

[@goforthbmerry]

Another great video. This year I will finally finish assembling my CNC machine and making projects.

[@EigenDesigns]

I think 2024 is the year you do this, Edward. Best of luck!

[@MattMadeIt123]

Great ideas in this video. Thanks. Two goals this year. 1. Design and build the nicest piece of furniture I've ever made. I'm thinking liquor cabinet. 2. Lower my golf handicap by 5 strokes.

[@duanes8209]

I like your videos, looking forward to watching more. My new years resolutions to work more in my shop and learn how to use my cnc better. I have avoided it for a while but finally completed a couple of.projects and they turned out really nice. Gives me the confidence to try more projects out.

[@EigenDesigns]

You can do it!

[@petertraversone689]

Another great video, as usual. My main woodworking goal for 2024 is to focus on organization in my shop. I started in December and I'm hoping to finish by April or May by adding french cleats to hang stuff and reorienting my dust collection. It's already proved to be much more efficient with with the few changes I've made over the last month.

[@EigenDesigns]

This is a great goal, Peter. I have invested a lot of time and energy into organizing my shop (and keeping it clean) and it makes my shop a much for effecient and inviting environment to be in. I have really enjoyed my french cleat wall and find that it helps me keep track of what is missing (e.g. if something isn't on the wall it is very obvious). Building holders for each tool also helped me get rid of non-essential tools or duplicates of things that I had. Hope 2024 is a great year for you.

[@darrenfinn5145]

I am new to the CNC community and am looking forward to learning more about the hobby. Nice work!

[@DannyQuinn-qq3sn]

Cool video. We are wanting to do more fun pieces like this this year.

[@rodrigogil9126]

Excelente content. Thanks for sharing 🙏

[@MadnessWorx]

My New Year’s Resolution was to get out into my shop more this year. In 2022 I dang near lived in my shop, but ended up moving to a new state in Dec 22. For some reason, I had trouble getting my butt out into the shop in 2023. I plan to make 2024 a year of more fun in the shop!

[@homestead4life18]

Love the Falcon tray so much! This year I am doing my first real craft shows, so my goals are to build up enough stock on time, and to design a booth that draws people in.

[@mikeschinsky6077]

Love the content, also the fact that you have Glengoyne, we visit their distillery every time we go to Scotland!

[@johnhill9668]

Great video as usual Mark! My new year’s resolution is to finally get my cnc up and running and use it to grow my small business. Thanks for all you do. Great job!

[@EigenDesigns]

Thanks John - Good luck this year!

[@jimrosson6702]

Congrats on hitting 20k great video thanks for sharing

[@EigenDesigns]

Thanks Jim - it's been a great ride so far!

[@jacobwitkowski6245]

Awesome ideas! Mine is to find a new creative craft that I can truly dive into and possibly turn into my own business. Woodworking? Metalworking? 3D printing? Who knows but I am currently really enjoying going down the rabbit hole of woodworking.

[@HarleyLive2Ride]

Inspirational ... Need to Use My CNC more will try some of these

[@EigenDesigns]

That's a great goal Daniel. I hope you're able to get some more time with the CNC in 2024.

[@SmithJonny45]

Awesome ideas! I made a resolution to make and sell more projects like this. Thank you!

[@edflo3049]

My new years resolution for this year is to get a certification or two and to do one major project a month giving me 12 big projects for the year. All leading up to a bigger project at the end of the year. It’s the little project in between and the monthly ones that will build the confidence I need to do the bigger ones.

[@JJ-vj9ly]

Love the video. My resolution is to share my love for CNC work with others, both on the projects produced and the knowledge I learn through the journey.

[@EigenDesigns]

There is definitely a market out there for those eager to learn how to use their CNC. I hope you're able to explore this more in 2024.

[@fransiscoalvarezinski6293]

Very well done. Thanks.

[@EigenDesigns]

Glad you liked it!

[@johnnyking6071]

I just got me a desktop Cnc going to try to perfect that and my new life woodworking. Thanks for the great videos I love what you do. Keep it up.

[@EigenDesigns]

Thanks Johnny. CNCs are a lot of fun and provide an infinite outlet for your creativity. The learning curve is steep at first, but you'll be a pro in no time!

[@flakk1989]

New subscriber here. Those are nice little easy projects to make. My goal this year is to use my Onefinity more often. I need to make things more often, at least twice a week. Thanks for the video!

[@jylekones8]

Congratulations on 20k!! My resolution is to make and sell my first CNC product designed entirely by me. I’ve sold my services for a long time in finish carpentry, but never my own designed product. Cheers!

[@MichaelKatzovitz]

Thanks for the great video. I am hoping 2024 will see me using my CNC more!!

[@EigenDesigns]

I share that resolution Michael. I hope we're able to acheive it :)

[@leecoppin66]

Great video, love the Shark board . My main resolution this year is to move out of the garage and have a dedicated , bigger, shop

[@EigenDesigns]

That's a great goal and big step forward. I feel like a dedicated shop is when you know you have made it as a wood worker. I hope you're able to achieve this is 2024 Lee!

[@ifiwooddesigns]

Great to see you back. All look amazing. I’m about to purchase my first CNC machine so going to have to learn to use it as well as everything that comes with it. Noticed quality bits are also expensive. Hopefully by March 1st I’ll be producing something or just buying files if nothing else. 🤷🏻‍♂️

[@EigenDesigns]

I would highly recommend investing in quality bits Peter. The cheap ones aren't worth your time and can even ruin a project if you're not careful. I hope your CNC journey brings you joy and fulfillment 😄

[@atulsri100]

Great video. I just bought a CNC before Christmas and my goal for 2024 is to experiment and come up with innovative products for customers in my area.

[@shophumblehome]

My new years reposition this year is find ways to make some more things around the house and for my family with my CNC!

[@JPToto]

Top notch, as always, Mark! I've learned a ton of CNC tips by watching. Already bought the MF plans off Etcy, just gotta get them exported from Fusion for my XCarve. Cheers and happy New Year!

[@EigenDesigns]

You're always super supportive, JP. I hope 2024 is a great year for you!

[@MP-zl1to]

my new years goal is to finish setting up my shop and spend more time woodworking!

[@gt2scale]

Cool designs, and nice video! My resolution this year is completely rearrange my shop as many times as needed to create an inviting environment for making.

[@EigenDesigns]

I love this goal. What are your ideas for organizing your shop? I have found over the years that if I keep my shop clean and organized I am much for inclined to spend time in there.

[@gt2scale]

@@EigenDesigns I do not have a specific plan, so I will mobilize any tools that need it and try new configurations/orientations until somethings feels right.

[@roblehmann2378]

Get wife's shop and mine done so I could get my wood working shop up and running a long with my Lazer and cnc up and running... love your videos and thank for sharing your projects to give everyone ideas and your g codes to help out newbie like me.

[@EigenDesigns]

Awesome comment, Rob. Thank you 😁

[@VeteransOwnWW]

Congrats on the 20k! New Years Resolution is to work towards improving the shop and gaining more commercial clients.

[@Bernardgrubb]

Great video, I just came upon your channel. My New Year's resolution is to retire and setup a new wood shop with a new CNC. Could use those bits. lol

[@ryanharris918]

Great Video! My New Years resolution is to go on a walk with my family at least 4 times a week and get started creating with the CNC I got for Christmas!

[@EigenDesigns]

Those are both great goals, Ryan. Time with the family is always a good investment. I hope 2024 gives you the opportunity to reach both of these goals.

[@alwymer1618]

More use of my CNC for 2024. Love it

[@EigenDesigns]

I like this goal, Al. I hope you're able to get more time on your CNC this year.

[@Robinsonsdr1]

Great video, love the humor of the shark cookie board. My new years resolutions are to learn more about inlays with my cnc and focus more on mental health. Happy new years to all.

[@EigenDesigns]

Inlays are fun and challenging. It adds a completely new dimension to CNC work. There's a lot of really good information on this over at @twomoosedesign

[@Robinsonsdr1]

@@EigenDesigns 👍 thank you for the links. I am always looking for as much information as I can. I find myself getting lost in videos everyday...

[@thomasrichmond7989]

My goal for 2024 is to get my wood working business up and running. I’d like to start doing some CNC work but after moving, I still have to get my shop set up.

[@brianstelly6470]

My New Years Resolution is Family. Spend more quality time with each of them. And making fun things with the CNC is great way to make gifts vs buying another gift card.

[@EigenDesigns]

This is a great goal Brian! You'll never regret spending more time with family. I hope this becomes a reality in 2024 😃

[@getcadged]

My resolution is to get my first sale from something on my CNC. I’ve been making stuff for friends and family, so time to step up my goal!

[@sunsoutgunsout3181]

Just found your channel. Quality video that's also interesting. Loved the written commentary. My goal for this year is to go deeper in cad/cam and try to make some really unique things. Here's to a banner year for all. Cheers.

[@EigenDesigns]

Thanks for the support. I hope you're able to make some unique projects in 2024.

[@stevekinnaird6835]

Great video. Excellent projects to get people going. My New Years Resolution is to get my shop back in order. I had a remote site with a lot of duplicate tools and when the project ended I ended up with everything in my home shop. I have slowly started selling off the duplicates and can almost see light at the end of the tunnel. Hope it's not a train LOL

[@EigenDesigns]

It will feel so good to get everything organized!

[@tomvetterani9653]

Mark - it's been a while since you've done some new CNC videos. This one follows the early tradition that you established - so congrats on another great one. My 2024 goal is to build a new shop in my basement. I've already relocated my Onefinity X-50 there, but need to create the new space to house all of my tools. I had to take a hiatus this past summer to help a friend who was diagnosed with lymphoma. She didn't make it after a 5 month battle. Now refocused on a new year and back to skill building and creating new and useful projects for friends and family. All the best in 2024!

[@EigenDesigns]

Sounds like a great goal Tom! I hope you're able to find the time and energy to get setup in your basement and continue fueling your passion for the craft. I hope 2024 is a great year for you.

[@brianbast3836]

I have had a c.n.c. for some time.This is the year I start my side business . You have helped inspire me.

[@EigenDesigns]

That's awesome Brian. I hope this is your year.

[@danielwilliams4438]

My shop new years goal is actually to not only use holiday profit $ to buy a cnc, but also learn to do the actual file designs myself before the next Christmas holiday season starts instead of always hunting for files to buy!

[@kevinjensen9817]

Great video. New Year’s resolution for me would be trying to be more productive in the shop and finding things that sell.

[@EigenDesigns]

That's awesome Kevin! I hope you are productive and profitable in 2024 😃

[@kevinjensen9817]

@@EigenDesigns I hope you do as well. I really like the Millenium Falcon tray. Wish my cnc had a larger work area to do it justice

[@cjckmn]

Nice video. Thanks for posting. Goal for 2024 is to build an enclosure for my cnc.

[@pierresuet3000]

Great video, it teaches me a lot. My resolution for 2024 is to start a small business with my low-end CNC so that I can buy better equipment and grow (while I study).

[@Bobzillabob1]

My New Year's Resolution is to reconfigure the entire shop to make room for my first venture into CNC with the Shapeoko 5 Pro 4x4 that arrives in, wait, 6 days!? I have so much work to do. Lots of plans from coasters to classic Mini Cooper dashboards. Might even carve out that Pinball Whitewood my son is begging me to do.

[@FALCON390CNCWorks]

My resolution is to level up a Fusion 360. Thank you for your works 👍

[@richardmarquardt6246]

Great video and ideas. My 2024 resolution is to learn Fusion 360 for my coming Onefinity Journeyman Elite and Bambu Labs 3D printer. Have a happy and safe 2024.

[@DougAlcoe]

Recently discovered your channel and subscribed. My New Year's resolution is to reorganize the garage and add a CNC into the shop. I want to go with the Foremen, but not sure if it will fit. Everyone says go to big!! Thank you for your videos!

[@EigenDesigns]

Hey Doug, glad to have you as a subscriber. I bought a smaller one to start with and my advice to you would be to get the biggest you can fit into both your shop and your budget. I hope you're able to hit your goals in 2024!

[@DougAlcoe]

@@EigenDesigns Thanks!

[@AngieWilliamsDesigns]

My goals are to get my shop organized. And to get my cnc up and running again. I haven’t touched it for a while. I have an xcarve and it’s out of square.

[@tomforeman1123]

Mark, great video. Direct and to the point. I just ordered a Onefinity Elite Foreman CNC and in this new year I plan to learn to use this wonder machine by making plenty of mistakes and then coming back to videos like yours to see what I did wrong! (I am sure several of those mistakes will involve breaking endmills) That's how we learn isn't it?

[@EigenDesigns]

Unfortunately, yes. Sometimes we have to learn lessons the hard way 🤣

[@Kennebec27]

My new year resolution is to make more stuff with wood. I recently bought a small cnc machine and plan on getting a laser engraver later.

[@docdrae79]

My new years resolution is to learn cnc more and build my woodworking business!

[@gthmcty111]

Excellent video as always! My resolution for this year, is to buckle down and focus more on my CNC business full time!!

[@EigenDesigns]

That's a great goal. I am interested to hear what you will focus on to help achieve this (e.g. focus on more marketing, increase production, make more content, etc.). I hope 2024 is a great year for you and your CNC business.

[@gthmcty111]

@@EigenDesigns thank you sir! I would like to focus on more content and production. My background is in sales and marketing so that part isn't so scary. Being able to produce more content to become more relevant is a huge focal point this year!

[@dalelawhorn8725]

Great video. News Years resolution is to be able to get the Onefinity Elite Foreman and add cnc cutting to my laser engraving.. I think the 2 would get along great...

[@EigenDesigns]

You'll love the Elite Foreman Dale. If you end up getting the laser that goes with it, let me know what you think about it. I hope 2024 is a great year for you.

[@Purinelz]

Thanks for sharing. My new years resolution is to create a short catchy company name.

[@karenmcdougall9131]

Hi Mark, enjoyed your video, thanks. My New Years Resolution is to not give up on my CNC journey.

[@EigenDesigns]

Best of luck!

[@remonv83]

Great video! I want to use my new CNC more and make some nice personal projects for myself and to giveaway this year!

[@EigenDesigns]

That's a great goal. People love getting personalized gifts... especially when they know the giver has made it.

[@Texas_Rigged]

For 2024 i want to be as creative as you!!!! love your videos keep it up.

[@EigenDesigns]

Thanks bud! I hope 2024 gives you the opportunity to express your creativity. All the best!

[@villageidiot8718]

Just came across your channel. You have some nice designs. I don't normally make New Years resolutions, but if I did this year it would be to sell some CNC projects to at least pay for the CNC router I just ordered.

[@OrionDomeric]

Very interesting spoil board design!

[@EigenDesigns]

Thanks Bryan! It was quite an investment, both from a time standpoint and the thought that went into the design. Now that I have it up and running, it's been amazing. The threaded inserts and dog holes have really changed the way I use my CNC. My spoilboard has become a utility in and of itself. I have a video on it if you're interested: kzbin.info/www/bejne/rZ6Vqn9uasqBgKcsi=3y_2h71BONmVPc9O

[@OrionDomeric]

@@EigenDesignsThanks I had already sought it out and I've ordered threaded inserts. I have a 3D printer myself so I'm printing some toe holds already 😅

[@seabeegamer4498]

I'm trying to turn my hobby into a business this year. Need to buy tickets to see my kiddos in Germany!

[@christopherbaisden5104]

In 2024, I am going to really work to grow my woodworking business as my resolution. Love the video thanks

[@EigenDesigns]

That's a great goal, Chris. I hope you're able to grow your business and achieve these goals in 2024. I always find it's helpful to set SMART goals - Specific, Measurable, Achievable, Relevant, and Time-bound. This is your year bud :)

[@johnagorman]

My new years resolutions: become very comfortable with fusion 360 for CAM, get product into the hands of customers, and have an online store (not Etsy) Thanks for the ideas. I'll see if you have fusion cam lessons. Cheers

[@michaelgutierrez6564]

My New Year's Resolution is to finish putting my CNC together and get my garage/ shop organized. My spoilboard is inspired by the one you made for your CNC.

[@EigenDesigns]

Thanks Michael. I hope your spoilboard is serving you well :)

[@graveurgraveur2691]

Thinking of improving on my Workbee cnc this year. Nice projects!

[@EigenDesigns]

Thank you @graveurgraveur2691. I hope you're able to achieve this in 2024.

[@diyhowie3812]

Great Video. New Years resolution for 2024 is to do more wood projects.

[@EigenDesigns]

Awesome goal Howie. I hope you're able to get to more woodworking projects in 2024.

[@johndolleslager1270]

I have 2 New Year’s resolutions: 1) learn to use my CNC more and try more elaborate projects and 2) get healthier than I was on January 1st. Thank you for all of your content!!!

[@EigenDesigns]

Thanks John. I hope you're able to achieve your goals in 2024.

[@trashbag8124]

One of my goals for 2024 is to start using my old CNC machine again (zenbot) and get into cinematography! If I have time, get out my Traxxas xmaxx!

[@gareva1]

I’m waiting on my onefinity to show up, so my goal this year is to get familiar with all it can do and come up with some neat projects!

[@garybarretta9394]

Beautiful work! I can't tell from the video but do you use stock that's been laminated together to try and prevent warping or are you using full width milled stock?

[@dangoras9152]

Congrats brother... My new year is gonna be make more stuff on the cnc and maybe wear it out lol😂.... Keep it up brother

[@EigenDesigns]

I like that goal Dan! Keep cranking away at it bud. Thanks for your support.

[@alvillarreal1478]

Great video. What are those hold down clamps called. I like them they're non evasive 😅

[@bledford13]

Great video, as always, Mark! Congratulations on 20k subscribers. I remember when you had less than 200 and said if you hit 1,000 you were getting a Saw Stop. You've come a long way and despite your videos always being top-notch, they have improved greatly! My goal for 2024 is to stop just recording projects and actually edit and post some videos. I have so many ideas, I can't crank them out fast enough, so I need to focus on what's already recorded and then work on new content.

[@CampfireWoodworksRVA]

That’s AWESOME!!! The fact that you already have footage is half the battle and twice as far as I’ve come. You got this! Reply to this post when you post a vid. I’ll get an email alert and I’d be happy to Sub and support your growth.

[@bledford13]

@CampfireWoodworksRVA thank you! I do have a KZbin Short posted under @UBSquaredWoodworks. It's basically just a placeholder for the name, but I would certainly appreciate the sub.

[@EigenDesigns]

Bryan, you were subbed when I had less than 200 subscribers?? You're one of the OGs then. Thanks for the continued support. I just subscribed to @UBSquaredWoodworks. I am your 4th subscriber so please remember me when you get your 1 Million sub KZbin plaque 😄

[@CampfireWoodworksRVA]

I’m Sub’d… #5! Let 2024 be your year. Good luck brother!

[@bledford13]

@@EigenDesigns thank you! You're an inspiration!

[@ment001]

My new year’s resolution is to finish building my new 1515 CNC and be able to never have to work for anyone else ever again ;)

[@KristyGravitt-vz3te]

My new years resolution is to learn all i can about the cnc world (and laser) and get my work room up and running.

[@katsuninken4458]

I am hoping to purchase a cnc machine this year. So that is my goal to start doing cnc wood carving.

[@Caleb_Gosiak]

Love the video! My goal for 2024 is to golf in 4 different states! Thanks for running the giveaway.

[@EigenDesigns]

Great goal Caleb!

[@johnshipps441]

My 2024 NY resolution is to get my CNC side hustle to $1k/mo in profits so I can bring my wife home from her job. I really enjoyed this video. You have some great ideas and you’re a very thorough presenter. New Subscriber here!

[@EigenDesigns]

Thanks John - I really appreciate the encouragement.

[@johnshipps441]

@@EigenDesigns I forgot to mention that I really liked the whisky flight the best. I can see making that as my first project once I get a machine. Now, I have to decide on Shapeoko, or OneFinity or Axiom. 🧐

[@EigenDesigns]

@@johnshipps441 They are all good machines. I have had two OneFinity CNCs and they have been nothing short of spectacular. The one drawback was the long lead time when I ordered each machine, but that's my only complaint. I also like how they continue to iterate and improve their design and add new accessories. Good luck in your decision!

[@airheads24]

My plans for 2024 are to do as many enjoyable things that I can and one of those is learning CNC.

[@AnthonyMaragou]

My resolution is to.......... Finally finish building my cnc in 2024! Thanks for the inspiration

[@EigenDesigns]

I think you'll do it Anthony. 2024 is your year :)

[@DudeSawdust]

My New Years resolution is 40-52 KZbin videos for 2024. I don't have a CNC but I thought I'd still participate. So make sure those bits go to someone who needs them. Great video as always. May the Force be with you.

[@EigenDesigns]

I love the ambition Logan! Question for you sir, of the 40-52 videos, how many of those do you plan to be shorts vs full length videos? I haven't been creating many shorts, but I know some content creators are using them effectively to grow their audience.

[@DudeSawdust]

@@EigenDesigns Good question. I have resolved to not doing any shorts at all. I put out a bunch in the first half of 2023 and they did nothing for my channel and debatably hurt my channel. My actually goal is a video every week but I fear that is not realistic. My 14 year old son is editing all of my simpler videos and I will be editing my larger project videos. Without him I couldn't do it. Last years focus was quality over quantity and that failed so this year it is quantity + value. We'll see how it goes. So far I think it is working. I'm also working on developing a tool that I think could be a hit. So stay tuned for that.

[@stephenpowdrill7445]

My New Year resolution is to move past the “paralysis by analysis” and make more sawdust!

[@cliff5240]

2024 goal is to spend more time in my shop!!

[@jamesfleming1643]

My New Year’s resolution is to learn something new. I’m starting with Vectric and Spanish.

[@explodeder]

My ny resolution is to start building inventory to sell at craft fairs in the spring.

[@Actio83]

My new year resolution is the get my concern that I bought a year ago up and running and cut my first project. Want to try the falcon :)

[@EigenDesigns]

2024 is your year Cato! I hope you're able to get some projects completed too!

[@Actio83]

@@EigenDesigns thanks :) Steppers are working but the limit switches are dead.

[@markmccreary6972]

I am retiring at the end of the year, so I am going to begin to prepare for my future woodworking business

[@EigenDesigns]

That's the American Dream right there Mark. I hope your retirement is filled with rewarding projects in the shop.

[@nunyabizz387]

My new years resolution is to get my shop built and a new CNC. I want to start supplementing my retirement and just keep busy

[@mkegadgets4380]

My New Year’s resolution is to spend more time in the shop.

[@EigenDesigns]

I hope you're able to do that as well. Also, congratulations on 1,000 subs! Keep it up 😀

[@JCraftvfx]

Great item ideas, but one thing to be cautious about is the Millennium Falcon tray. It may not seem like anything, but since Starwars is owned by Disney, they could come after you for selling starwars related things. If its an item that I know will sell because its related to a movie, or a person, I usually avoid it.

[@FearsomeWarrior]

Reminds me of Dr. Pepper when they ruined Dreamwave/IDW publishing for printing an extra Dr Pepper ad.

[@rongunter4050]

2024 goal to sell many projects made on my homemade CNC router table.

[@ElCidPhysics90]

My New Year’s Resolution is to be more intentional in all that I do. Whether it’s my job, my family, or woodworking, I want my actions to mean something rather than just going through the motions. I believe this will make my activities more enjoyable and have better outcomes. Thank you for the video. Interestingly, one of the reason I was drawn to your channel is your name, Eigen. I’m a physicist and Eigen values are extremely important in topics like quantum mechanics. Just thought that was a cool name. Thanks again.

[@EigenDesigns]

I like the intentionality you’re speaking of. Each year my wife and I sit down and talk about our goals (e.g. health goals, financial goals, marriage goals, etc.) so that we can have a target to head towards. Without that, you become a product of your day-to-day decisions, which may not ultimately take you to where you want to be. I hope you’re able to achieve this in 2024. Interesting enough, Eigen Designs comes from Eigen Values and Eigenvectors. I took linear algebra in college as part of my engineering degree and the name really resonated with me. You’re one of the few people to catch that 😊

[@ElCidPhysics90]

@@EigenDesigns Absolutely. If you don’t plan where you are going it could be anywhere. Yes! Eigenvectors and values were a major topic in linear algebra. I actually enjoyed that class. Love seeing other scientists on here. Thank you for your work here. Much appreciated.