CNC Router & Designing For Beginners - Garrett Fromme

This video is for anyone who is a beginner and new to benchtop or desktop CNC routers and project design. This video will walk you through step by step how to get started and design projects for your CNC router. You will also learn how to transfer g-code to your CNC router, among many other tips and tricks for the beginner.
This video is intended to help the beginner avoid bad cuts, broken router bits, mistakes, and countless hours on KZbin trying to learn. This video will lead you to understand CNC router bits, saving g code setting up your cnc router, feeds and speeds.
You will get a lot of cnc router tips and tricks along the way. We will also cover the CNC control software, such as universal gcode sender and gsender. You will learn how to do a tool path and about profile toolpaths and cuts. and will know the difference between profile and pocket cuts.
We will be working in Vectric Vcarve desktop, pro and aspire but all applications work for all design software, like Easel, Carbide Crate, Fusion 360, Carveco, etc.
Longmill CNC router→ sienci.com/pro...
FREE Feeds & Speeds table→ bit.ly/3fxYeUF
gSender FREE download→ sienci.com/gse...
3/16" down bit→ bit.ly/3zJT2oE
CNC router start bit set→ bit.ly/3ty7gpw
Longmill touch plate→ sienci.com/gse...
CA Glue (10% discount code→ IDCWOODCRAFT)→ bit.ly/3yJIjZY
Inexpensive laptops (4 starr) for your CNC router
→ Lenovo IdeaPad 14-inch: amzn.to/3rcIjyn
→ ASUS Laptop L410 Ultra Thin Laptop, 14”: amzn.to/3cmtc14
Discounts & Deals...CNC Insiders→ idcwoodcraft.c...
Support this channel→ www.buymeacoff...
VIDEOS
Beginners easy first project video→ • An Easy CNC Router Pro...
All about router bits→ • CNC Router Bits - Ever...
__________________________________
VECTRIC SOFTWARE LINKS
[Please use these links when you order. It gives me credit. Thank you]
→ Vcarve Pro (Recommended): shrsl.com/36xfh
→ Vcarve Desktop (24x24” size limit): shrsl.com/36xfj
→ Vectric Aspire (3D modeling): shrsl.com/36xfk
→ Cut2D (for the budget-minded): shrsl.com/36xfm
__________________________________
#cnc #cncrouters #cncforbeginners #vcarve #vectric
------------------------------------------------------
Buy me a cup of coffee: www.buymeacoff...
-----------------------------------------------------
LONGMILL CNC ROUTER WEBSITE: sienci.com/?re...
ROUTER BITS FOR CNC ROUTERS
→ 8-pc carbide CNC router bit set (w/ free vector files) bit.ly/3d1iQnF
→ 1” Surfacing bit required for surfacing your spoil board: bit.ly/2QEYLKz
***Use this discount code (SURFACING BIT)
→ Glass engraving drag bit: bit.ly/3tRy98s
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: link.idcwoodcr...
→ Hearing protection (plugs don't work): amzn.to/2Hs1RgW
------------------------------------------------------
Starbond CA Glue Products
GET 10% OFF when you use this discount code: IDCWOODCRAFT
Starbond link: bit.ly/3g81RRU
---------------------------------------------
MAKING MONEY WITH A CNC
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: idcwoodcraft.c...
Join CNC ENTREPRENEURS Facebook group: / cncentrepreneurs
------------------------------------------------------
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): idcwoodcraft.c...
------------------------------------------------------
NEW TO CNC OR STUCK IN A PROJECT?
Schedule one-on-one time with me: idcwoodcraft.c...
------------------------------------------------------
PLAYLISTS
CNC FOR BEGINNERS: bit.ly/3rg4WTl
CNC ENTREPRENEURS: bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: bit.ly/3pdmFsi
------------------------------------------------------
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: bit.ly/3r5XzNh
------------------------------------------------------
Cool vector files for CNC router & CNC laser: etsy.me/3oxX79l
------------------------------------------------------
Learn how to start an online business from scratch: bit.ly/2ZUEIKK
------------------------------------------------------
CNC FOR BEGINNERS PODCAST: anchor.fm/cnc-...
Garrett Fromme
Facebook: IDCWoodc...
Website: www.idcwoodcraft.com
Email: [e-mail]

[@IDCWoodcraft]

Thanks for following along with this video and hope you enjoyed it. If the Longmill peques your interest, check it out by clicking here now: sienci.com/product/longmill-idc-woodcraft/?ref=IDCWoodcraft

[@antoniophilip2377]

Lpp

[@whocaresidontcare2116]

Enjoyed the lesson and wanted to say thank you for the clarity along the way. I'm new to this and at 84 years old and building a 4' X 4' 2.2kW vertical mill from scratch, it has been a challenge since the more I learn, the more I realize what I don't know. Be well. John K.

[@ronjamison4346]

Woops! Bad link.

[@IDCWoodcraft]

Ron, apologies on that one brother! Here is a new link: sienci.com/product/longmill-mk2/?ref=IDCWOODCRAFT

[@avoidtheherd7066]

need to fix that top pinned link.@@IDCWoodcraft

[@sonjacoclet573]

the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzbin.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

[@IDCWoodcraft]

Sonja, I'm a little unclear on this one my friend. Are you looking for which types of woods would make a good cutting board? If so, there's so many good options!

[@joemac-q4x]

Your aha moment is no exaggeration for me actually!! after only 9.08 there is a lot more illumination for me, thank you so far...

[@IDCWoodcraft]

joemac-q4x, I'm so glad to hear that the video provided a helpful aha moment for you! Keep exploring and learning more about CNC woodworking - it's such a rewarding craft.

[@clovella9154]

Well done. Finally somone who understand the struggles of a beginner.

[@IDCWoodcraft]

Clo, we were all there at one point or another brother!

[@mikereed6271]

Best and easiest to understand I’ve seen. I’m 60 and ignorant of anything computer. Thanks very much!!

[@IDCWoodcraft]

Hey Mike, you're so welcome! I'm glad this one was helpful for you! Sorry for such a delayed response, it's been a busy week working on getting some new videos out!

[@cjtoledor]

"And Get Your Questions Answered At The Same TIME!" Got to love it, Thanks Garrett another great video.... 👌👌👌

[@IDCWoodcraft]

cjtoledor, I try to do my best! Thanks for the compliments!

[@davearnett5360]

Thank you! I've learned more in two hours watching your videos than I have in two years of play around with my machine.

[@IDCWoodcraft]

Hey Dave. This is a nice comment to read. Tahnk you

[@cowboy930]

Wow ! I have never seen this depth of information and explanation on where on youtube I was given a shaper origin 2 years ago for my birthday I liked it because space is an issue and it is portable but nobody explain in detail like you cause a lot of people like me go on the tube to find explanation and at the end of the video you end up blank cause did not understand any of that jargon and wasted you time learning so thank you for that I appreciate .👍

[@IDCWoodcraft]

cowboy930, I'm so glad you found my explanation helpful! The Shaper Origin is a great tool for those with limited space and looking for portability.

[@norm5785]

Just begging to research adding a mill to my woodworking activities, now that I have retired. Just a hobby for me. Thank you for sharing your awesome videos with us, from Henrico County Virginia

[@IDCWoodcraft]

Norm, you're so welcome! I truly love what I do and sharing what I love with our awesome CNC community! Let me know if you end up making the leap of faith my friend, it's awesome!

[@paulobraga5439]

Good morning Mr. Garrett. With this video, you saved my day. I had already forgotten all about CNC. Thanks.

[@IDCWoodcraft]

Paulo, that happens to the best of us brother! We could all use a refresher every now and then.

[@avoidtheherd7066]

Hands down the best CNC channel I have found. I can now proceed with confidence that my future questions are probably already answered here.

[@IDCWoodcraft]

Avoidtheherd, thank you brother! Im glad to hear you found this video helpful.

[@roblescurbappealconcrete]

Now I know I’m getting a cnc router. I sat through the whole video and backed it up several times, but at least understand it better. I actually sent this video to my phone so that I could save it, and I could go back and study it more. I can draw almost anything on paper, now I’m hoping to be able to use the CAD and CAM to put some of my art on wood or other materials. Thank you so much, the video was very informative, even for an old man like myself. You have a new sub. God speed

[@IDCWoodcraft]

Robles, glad to hear it brother. Keep working hard and you will learn CNC/ CAD and CAM in no time flat my friend.

[@raygodbout]

Garrett, wish you knew how many times I watch your videos, over and over and over. I have a hard time learning but I stick to it. Thanks sooo much for your help. Just getting started trying to get a drilling path for my spoil board. Good thing you are there to help!

[@IDCWoodcraft]

Raymond, right on brother! keep sticking with it and learning. You will be a pro in no time.

[@RonInAVan]

I just started watching this video and had to stop to comment, I’ve been married to my wife for 42 years and I still can’t figure her out lol 😂 I sure hope this CNC will be easier and faster. 😂👍🏻

[@IDCWoodcraft]

Travel Camp, man I totally hear you on that! I definitely think the CNC is easier to figure out! Keep up the good work!

[@rabydna]

I have been married 41 years. Can you give me any advise:)

[@spunkybear1597]

You must be related to my husband😂

[@steve-martin-42]

It's a walk in the park 😂😂

[@kaeshur92]

If you've been married for 42 years to a woman, you already have it figured out. Cnc is way too easy and simple compared to that.

[@WikiSnapper]

I have been wood worker for years, I just ordered my first CNC machine, I haven't received it yet, but now is the time to learn. When you mentioned "brushing the router's teeth" I got a good chuckle. I learned that years ago. Nothing hurts worse than having a router bit work its way out and eat through an expensive exotic wood board. It has only ever happened to me once. May it never happen to anyone again!

[@IDCWoodcraft]

WikiSnapper, congrats on ordering your new machine brother! I'm looking forward to you getting your machine in hand and seeing what you create. Definitely want to brush those teeth my friend. You're absolutely right, it'd be a shame to ruin an awesome project and piece of wood!

[@oliveriogarza5507]

Iam 74 years old I took one lesson on the cnc at the shop, very complicated. I watch your video and I was amaze how you teach. You explain in a manor that it is a lot eazer to understand. Thank you Garrett. ( I am going to watch it again)

[@IDCWoodcraft]

Oliverio, thank you so much! That's awesome, I'm so happy I could help make the CNC a little easier!

[@BBC12oz]

Newbie here. Best I’ve seen so far. You’re my go to guy now.

[@IDCWoodcraft]

Geoff, right on brother! Welcome to the wonderful world of CNC.

[@cjacoby75]

I absolutely love this video! Will watch it again when I'm in front of my machine.

[@IDCWoodcraft]

Christopher, I'm happy to hear it my friend. Glad to see that this video helped you so much.

[@americanpatriot-usaf]

Mental health is a bigger story that is never discussed publicly or, worse, shared with anyone. But, Garrett, the answers to life are out there. Seek them!!! You are not alone, brother.

[@IDCWoodcraft]

Hey Patriot. Not a big religious person, but Jesus was spot on...knock, and the door will open. Ask, and you will receive.

[@JohnCHansen01]

Your instructive style of delivering information and knowledge is PERFECT!

[@IDCWoodcraft]

JohnCHansen, thanks brother! Glad you liked this one.

[@shaunbuckney4321]

OMFG. I've been searching the internet for a simple to follow video that teaches the basics, instead of skipping over them. I've purched a Foxalien CNC (which I'm waiting for its arrival), and I've been trying to learn the basics of how to use it. Until now, everything I've watched requires me to be smarter than a rocket scientist, with CAD and CAM software that is Einstein level. I really hope that my Foxalien will be compatible with the software that you demonstrated. You Sir, are a bloody legend 👍👍👍

[@IDCWoodcraft]

ShaunBuckney, right on brother! Glad to hear this one helped you.

[@tylersmith3201]

Best beginner CNC video I have watched! Garrett, thank you so much.

[@IDCWoodcraft]

Tyler, thats great to hear! Glad it taught you the things you need to get ahead in CNC!

[@deanthompson3087]

Thanks for putting your story out there. Your gonna be surprised how many people relate and understand.

[@IDCWoodcraft]

Hey Deam. Considering the number of likes on your comment, I agree

[@geoffwilson007]

Excellent video,many thanks Garrett.I have learnt a lot by watching this video…thanks again from the U.K.🇬🇧

[@IDCWoodcraft]

Im glad you liked the video Geoffrey. Happy to hear that you learned a lot.

[@DominickVisciotti]

Garrett is incredible. As a new CNC owner for the first, this video is an outstanding compilation of not only learning CNC but also learning how to use and design in CNC software, the does and don'ts and much more! It is definitely worth the one hour you will spend with Garrett. I will be watching hi other videos to help enhance my CNC abilities. Thank you Garrett!!

[@IDCWoodcraft]

Dominick, wow thanks for all the kind words brother. I'm humbled to be a part of your journey. Keep up the great work!

[@mamuana3121]

I used to carve woods with some designs like a praying hands,a face etc by using only a sharp knife, a broken glass and a sandpaper. Wish i could buy this CNC Router. Maybe someday, i have this womderful machine in my hand and command it to do even a hard task. 😁 This video is very precious for me.

[@IDCWoodcraft]

Mamuana, you will be amazed what a CNC can do to projects like you are describing. Keep working hard and pick yourself out a machine! I think it will be very rewarding for you.

[@dayworks9100]

New to CAD / CAM and CNC - thank you for a very good comprehensive overview - concepts explained clearly - even the gotchas!

[@IDCWoodcraft]

DayWorks, glad this one helped you! Keep working hard and learning everything you can.

[@charlielentz3069]

Garrett you are the best I am learning alot even thought I don't have a machine yet. I know I will go back to your video again Thank you

[@IDCWoodcraft]

Hey Charlie. Make sure you let me know when you get that machine. When is is going to happen?

[@user-ig4mg7go1s]

Oh man!!! The best invested hour for the last 2 years! Excellent work!!!

[@IDCWoodcraft]

Wow, thanks brother! I'm glad it was helpful for you!

[@user-ig4mg7go1s]

@@IDCWoodcraft And many greetings from Serbia!

[@jimsharp2479]

Thank You so much. I am at the “about to buy” stage and was a bit overwhelmed with the various bits of knowledge required. In this video, you put it across in a very, very, very understandable way, covering wee hints and tips in an extremely competent manner. You have moved me up to the “get to the shops” stage. Look forward to having at look at your other tutorials. Many thanks once again 👍

[@IDCWoodcraft]

Jim, I am happy to hear that this video clarified some things for you. Jumping into CNC can be a bit overwhelming, so I am happy to hear that you found this video helpful!

[@rogersecura378]

Garrett, Two of my favorite quotes are: "The Greatest tragedy is a wasted life." "No one on their death bed ever said, I wish I spent more time at the office." Thanks for another great video and sharing a part of your life story. When I was younger, I too was working at a job I hated. I remember my legs seemingly turning into lead as I walked up the stairs leading to the factory floor. I finally made the decision to go back to school. It was the best decision I ever made. After my electronics education I went from laboring in a factory to working in the engineering department for a local electronics firm. Even though it was a good job, I still had another yearning to do some creative and technical writing. Finally, after I retired, I started writing and submitting manuscripts to a few newspapers and electronics magazines. A long story short, and to my amazement, they actually paid me for the manuscripts I submitted. - Like you said, you have to believe in yourself and do what makes you happy. I wish you continued health and success.

[@IDCWoodcraft]

Hey Roger. Isn't it amazing when we do something we want and not 'waste our life'? Thank you for sharing part of your story. Mark twain said "Don't think, Ddon't try, just do"

[@James01520]

So I'm now moving last week's house number video to my second carve attempt. Thanks G!

[@IDCWoodcraft]

Hey James, you got it. So glad your following. You will save yourself so much time and frustration.

[@erickcornelessen5421]

Hi Garrett. I`m completely new to CNC Routers. Your explanation of how to use a CNC Router and what to look out for, is just fantastic. Keep up the good work, thanks.

[@IDCWoodcraft]

Erick, you're so welcome! Glad it was helpful!

[@kurtbutcher1061]

My CNC is finally being wired up tomorrow. It has taken me almost 5 months to find a electrician to upgrade my house for the CNC router I purchased. Day 1 is tomorrow. My semi-retirement is now in the works. Thank you for a great video and some life changing advise.

[@t4concepts]

Good luck for tomorrow Kurt, hope everything goes well ; ) When you first see your CNC machine going through it's motions I'm sure you'll find things pretty amazing, you can finally sit back and say "I did that"! To create something out of nothing ............... there's no greater satisfaction! All the best mate ; ) TURK

[@IDCWoodcraft]

Well, Kurt, I have responded a day after you left this comment. So, is that bad boy running?

[@kurtbutcher1061]

@@IDCWoodcraft It is up and running. Will be making a program and giving it my all. But tomorrow. It was a long exhausting day and want to be fresh. FYI the machine is a Laguna Swift 4 x4.

[@Darren518]

Garrett, Great video as always. Thanks for explaining everything it is really appreciated.

[@IDCWoodcraft]

You're so welcome brother! I'm glad it was helpful!

[@wjvandijk1ify]

Thanks very much, with this explanation indeed learned more than all the other KZbin video;s Vectic uses.

[@IDCWoodcraft]

WJ, you are so welcome my friend. Happy to hear you learned a lot from this one.

[@jessekurisko5659]

Thank you for these videos. I have a longmill on order. I watched 2 of your videos one of them I listened while I was on a 4hr drive. I now feel like I know where to start and how to start when I get my cnc set up.

[@IDCWoodcraft]

jessekurisko5659, you are so welcome my friend. Glad to hear that this video helped you.

[@BillWyss-z9y]

great video, thank you for sharing, yes I will be watching it again!

[@IDCWoodcraft]

BillWyss-z9y, Thank you so much for your kind words! I'm glad you enjoyed the video and found it worth watching again.

[@jaredsc_2338]

Thank you sir!! I'm new to CNC routers and I 'm learning a lot from you.

[@IDCWoodcraft]

JaredSC, you are so welcome brother!

[@andrewh3730]

Wow!! I just came across your channel. I am considering getting a CNC machine but have been hesitant because I know nothing about it. As an artist it’s something I’ve been wanting to learn to be able to create wood projects I just didn’t know how or where to start. You make this so simple. I appreciate it. I will continue watching you to learn and save up to buy one. Thanks so much!

[@IDCWoodcraft]

Andrew, glad to have you here brother! Everyone starts in their CNC journey where you are now so don't be intimated. CNC machines could be a great addition to your creative toolkit!

[@vicmccune]

WOW THANKS YOU ARE THE MOST CLEAR INSTRUCTOR THAT I'VE SEEN

[@IDCWoodcraft]

Vic, wow thank you so much I'm humbled! Welcome aboard to the channel my friend!

[@jaymoses8099]

Exceptional videos. I just bought my CNC a few weeks ago. Have been spending time to figure out the SW (from the vendors tutorials) and then I found your KZbin videos. WOW is all I can say. Running out now to get some MDF so I can make my spoil board, get it attached to the bed of my CNC. Probably, will use gSender instead of Ready2Control. Enjoy the coffees...

[@IDCWoodcraft]

Jay, I'm glad I could help! I'm excited for you to get your spoil board done and for you to get to cutting! Keep up the good work and thanks for the coffees!

[@moncefboukhenane7098]

Hey i'm a newbie CNCer and I wanted to thank you for all these information, I appreciate the tips to use on vectric softwares it saves a lot of time.

[@IDCWoodcraft]

Moncefboukhenane7098, glad to help brother! Happy cutting!

[@simoneprudent6423]

Hi Garrett, I succeeded in cutting the circle and square! It is thanks to you, I am so so happy. Again thanks so much. I’ll try to regularly contribute as if you had Patreon.

[@IDCWoodcraft]

Hi Simone. I could see the excitement in your message! I'm so glad to see this. I don't use patreon because it is a pain in the ass. Instead I use by a cup of coffee. It works much better. Here's the link if you ever want to contribute. Thank you www.buymeacoffee.com/garrettfromme

[@SteveVoecks]

Enjoyed the video, very informative. I appreciate the fact that you are furnishing support docs for future help.

[@IDCWoodcraft]

Steve, you are so welcome my friend. Happy to hear that you found it helpful.

[@mbalars1]

I am at a point in my life where your story hit me..... Hit me hard... I feel a bit more confidant in not only myself but in my dream... I can not support IDC Woodcraft right now. I need to do some things first. I will buy the bits and get the CNC in the near future. Keep up the Great Work Garrett....

[@IDCWoodcraft]

Hi Michael. So you are there. As you know...I understand. Write out what you want (not what you don't want), and focus on that every day. You will be amazed at what things look like in 6 months compared to now.

[@stevewild777]

Super helpful introduction to CNC. And I have to say loving gSender!!

[@IDCWoodcraft]

Steve, glad you liked this one! gSender is a great piece of software.

[@humbertofermin6047]

Hello, I am a beginner. I jus bought a CNC ROUTRT 3018 PRO. I like yopur videos. thanks

[@IDCWoodcraft]

Humberto, welcome aboard! And you're so welcome brother!

[@stevieg.4816]

P.S. I bought the Longmill machine Garrett is using in this video and honestly the Science folks have been courteous, polite and extremally instrumental when I got stuck, Thank you Science and you Garrett .

[@IDCWoodcraft]

Stevie, glad to hear you like your longmill and the gents over at Sienci have been great too!

[@mauriciopaolone1]

Hello, thanks for all the tips and shortcuts you are teaching. I’m 60 and always been fascinated computers and cnc machines, enough to get my self to built my own to learn everything possible I can, quick as I can. I have the same feeling on your side personal moments shared story. Keep your Glock or whatever it is on your safe and have it ready for the apocalypse, but for now there’s lots of kids (and old kids) that needs and appreciates you. You are doing good to the Universe!

[@IDCWoodcraft]

Hey Mauricio. CNC and computers are a lot of fun, for sure. I promise my friend, the gun will be kept very safe as it always has been.

[@taralovewestwest]

Amazing video I feel fully confident to move into the amazing world of CNC machines thank you

[@IDCWoodcraft]

taralovewestwest, you're so welcome! I'm glad you found it helpful and I'm looking forward to seeing what you create my friend! Happy cncing!

[@toddspeck9415]

I have been really enjoying watching all your videos. Thank you for sharing your knowledge.

[@IDCWoodcraft]

Todd, so nice of you! You're welcome my friend!

[@tariqalbadawi2929]

I loved the point about the two green dots to save time thanks alot

[@IDCWoodcraft]

Hey Tarig. It is such a simple little thing to make it go faster.

[@hongtecklee135]

Gonna said wow to your video, this is like 1 on 1 teachings and is a big help for me. Has been subscribed. Thanks

[@IDCWoodcraft]

Hongtecklee135, welcome aboard brother! I'm glad the videos have been helpful so far. I'm happy to be a part of your CNC journey and hopefully make things a little easier along the way!

[@captainbeard2301]

By far the #1 video I needed. I am brand new to the hobby and was looking at the Longmill as my first CNC router. Great content.

[@IDCWoodcraft]

CaptainBeard, I am so happy to hear that brother! Welcome to the wonderful world of CNC.

[@chrisreynolds2410]

I need a few bits for my CNC and I ordered one from Amazon…….then like a fool realized I should have bought it from you to show appreciation for what you are doing for all of us. Question…..where can I go buy some bits?

[@IDCWoodcraft]

Hey Chris, thanks for your support brother. I appreciate it! You can buy bits off of my website. Here's the link my friend → idcwoodcraft.com/cnc-router-bits-2/

[@jimhinkle7245]

One of the best tutorial videos I've seen on any subject. Well done!!! I've subscribed.

[@IDCWoodcraft]

Jim, wow thanks! Welcome aboard brother!

[@hhanger1]

I have a Shaper Origin and many of the terms and processes are very similar. I see a flat bed CNC in my future soon so this has been great to alleviate my apprehension about transitioning over.

[@IDCWoodcraft]

hhanger, right on brother. I am excited for you to get a new CNC machine in your shop!

[@jeffjaekel2558]

Great startup for novice (me). Thanks!! You are a great teacher!

[@IDCWoodcraft]

That's great to hear Jeff! Happy to hear that you are all set up on your CNC!

[@Baldharlow]

Outstanding video. For a beginner, it's just what I've needed.

[@IDCWoodcraft]

Lester, glad to hear it got you on the right track my friend.

[@msmith08311]

I think I have found my path to learning Vectric and my new CNC. Exceptional detail. Exceptional knowledge of the material and great presentation style. I think I'm in for watching a lot/all of your videos. Probably some of them several times until the lesson sinks in. Thanks for putting together a fantastic set of videos to learn a complex topic.

[@IDCWoodcraft]

Hi Mike. I'm glad these videos are helping you. You might want to download the PDF I put together with all the videos I've created. That way you'll have them all in one place and you won't have to search KZbin for your answers that are so hard to find sometimes lol . Here's the link to download the PDF bit.ly/3mLHGfI

[@mikevyvyan7060]

Thanks for this video. For me it has unlocked some of the mysteries of CNC's and wetted my appetite to learn more. As a woodworker in his 70's, who recognises the physical limitations that ageing imposes, this looks really interesting. I can see that a CNC CNC fosters creativity and opens up a range of possibilities for smaller projects. Your explanations are clear, detailed and precise. They bear the hallmarks of an excellent teacher. Over the past 8 years, You Tube content has given me the knowledge that has allowed me progress from a newbie woodworker to one that makes hardwood items of furniture that are of a saleable quality. I am grateful to everyone who has assisted me in that process. However, I have to say that your style of teaching and content are outstanding and facilitate rapid learning and confidence building. I look for to watching more content so that I can make an informed decision and perhaps progress to being a credible CNC user. So again a very big thank you.

[@IDCWoodcraft]

Hi Mike. first of all, thank you for the compliments on my teaching style. Yes, I want this journey to be a joyful learning experience for those who venture into it. You are right. there are so many possibilities in this little world of CNC. The imagination is really the only limit. I would love to see some of the creations you have made over those years. Maybe you could send a couple pictures sometime. Do you currently have a CNC router, or are you just exploring the possibilities to expand your craft?

[@garycooke7961]

Thanks for sharing your stories. Thanks for your excellent tutorials on CNC from a fellow Longmill owner.

[@IDCWoodcraft]

Hey Gary (and brother Longmill owner), thank you for the compliment on the videos, and you are welcome my friend.

[@NJWoodwrks1956]

Garrett, thank you so much, I was struggling and getting annoyed You guided me in the right direction, heading out to my longmill and see if we can be friends again, lol Thanks again

[@IDCWoodcraft]

Hey Nelson. Thin of your longmill like a girlfriend. You have to smooth up to her. Get to know her quirks. This video will get you in the right direction. If you're in any Facebook groups, maybe you can share this,. I mean, if you had the frustration, others do too.

[@TheForgottenMusketeer]

I've got a yeti smartbench coming so now I have to learn! I'm a software engineer so I'm comfortable with computers but am coming to this completely green. This was the most helpful video, and done in a way that I really understood. I now understand the process and can build on that while waiting for my machine.

[@IDCWoodcraft]

Cameron, right on brother! I'm excited for you to get your machine and get started! I'm not sure if you've already seen the PDF I've put together for beginners yet. But, it has a list of all the videos I've created in order so that they are easier to find when just starting out. I think you'll find it super helpful! Here's the link if you wan to check it out →bit.ly/3mLHGfI. I think your background as an electrical engineer will definitely be to your advantage! I'm excited to see all the awesome things you create.

[@JohnBabiarz-dm1wp]

Thank you - this was incredibly clear and concise. This video alone will save me from making a ton of mistakes. I'm awaiting delivery of my first machine and this will let me start off on a solid footing. Great job!

[@IDCWoodcraft]

John, you are so welcome my friend! Congrats on your new machine.

[@DenisDeCharmoy-fl3ht]

Thanks for the excellent video. It's appreciated very much. Blessings.

[@IDCWoodcraft]

DenisDeCharmoy-fl3ht, Thank you for your kind words! I'm glad you enjoyed the video.

[@DenisDeCharmoy-fl3ht]

@@IDCWoodcraft Thanks, I'll ne in touch soon, as an application for finance is with my guardian that holds onto my lifes moments, as my brain cancer has come back twice. Blessings

[@nevillemadray2604]

very good guide for beginners took some of my confusion away

[@IDCWoodcraft]

Neville, im happy to hear this one helped you brother!

[@jashuad]

I cannot express how much this video has helped and cleared all most common questions I have as a beginner. Thank you and hopefully we can still get more videos.

[@IDCWoodcraft]

Jashuad, you're very welcome! There will be more to come my friend!

[@robmaguire6689]

An awesome video certainly cleared lot of the fog! Thanks Garrett.

[@IDCWoodcraft]

Hey Rob. Good. What do you think helped the most? These questions always help me make better videos next time.

[@bux49]

I spent 3.5 days trying to figure this out. Finally got it to work. Took 2 computers step by step. Wish there was a book. I am not buying a machine until I can work the VCarve somewhat. I am giving myself 6 months. I used Mastercam when I was machining. So far nothing crosses over. I'm retired and just plan on hobby stuff.

[@IDCWoodcraft]

Hi RJ. Wow, that was a bit of a challenge. But I'm glad you got it working. I'm also glad your dealing with first things first. Smart!

[@bux49]

@@IDCWoodcraft My biggest challenge was switching the cutter path to the outside. Got er done ! I am trying to figure out how to fillet corners. Mastercam was easy to do that.

[@russellmatthews595]

Hi Garrett, I hope this finds you in the very best of health, It has taken a long time to find your site but well worthwhile and I have spent many hours watching and learning just one small thing could you please number each basic video as I'm sure all who search out the basic would find this an advantage especially if they are like me and review some many times. keep up the outstanding work and thanks very much

[@IDCWoodcraft]

Hi Russell. Yes, the order is becoming an issue. Rather than number the videos (that would take a long time editting each one), I will be setting up my website and putting out a sheet that lists them in order.

[@halrichard1969]

Yes!!! I graduated. 😁😁 Kidding aside. Well Done Video. Easy to Understand. Thanks.

[@IDCWoodcraft]

Hal, happy to hear it my friend. Glad to hear it helped.

[@todds4101]

Great video and great explanation! You do a nice job! When I get a minute to breathe, busy busy before the holidays, I'll be diving in deeper on your videos (and the CNC for that matter).

[@IDCWoodcraft]

Hey Todd. I'll be here making more for you!

[@michaelmatey8193]

Excellent video tutorial. Clear and concise. I'm new to the world of CNC routers and project design. Your video did just as said in the description. Hats off to you Garrett! Keep up the good work. I am following you.

[@IDCWoodcraft]

MichaelMatey, so glad to hear that brother!

[@claudeelliott3993]

Well done! I'm thinking about getting into the CNC area and your video answered a lot of my questions. Thank you.

[@IDCWoodcraft]

Claude, thank you and I'm glad to help brother!

[@gregsettle1581]

Another great video Garrett. Very clear explanations of things like profile cuts and what an inside, outside or on cut is. Liked the demonstration of the roll of tape with the board to show this.

[@IDCWoodcraft]

Thanks Greg!!!

[@joetackett383]

Thanks you for your information and videos the are abreast tool for all of us new to cnc great job and very much appreciated keep it up l have lot to learn thanks

[@IDCWoodcraft]

Joe, glad to help my friend! It's my pleasure to help make the cnc journey a little less confusing! Keep up the good work!

[@clarkriccobuono3903]

This tutorial absolutely great. I will definitely follow your lessons. Thank you

[@IDCWoodcraft]

Clark, thanks for the kind words brother! Happy cutting!

[@stevestofiel3521]

Your videos are spot on when it comes to detailed instruction Excellent work! And Wow. Thanks for sharing the personal side of things. I have been stuck in that box for the past few years. Then life hits you with unexpected curve balls and the item in the desk has crossed my mind more than I would like to admit. Can’t wait till the end of this video to hear the rest of your story.

[@IDCWoodcraft]

Hi Steve. Well, you saw the rest of the video. What are your thoughts on the story as it pertains to you being in the box?

[@GaryLundgrenCrafts]

Great video! I'm just getting into CNC. Haven't made my first cut yet. I subscribed and ordered the 3/16 bit. Will be watching more of your videos to learn. Thanks! 👍

[@IDCWoodcraft]

Gary, glad you liked this one brother! Welcome to the world of CNC.

[@garysmith5906]

Hi I'M A NEW WATCHER OF YOUR PROGRAM, AND FOUND IT VERY INTERESTING .AND I WOULD LOVE TO LEARN MORE ABOUT THE SALES OF YOUR BITS ,

[@IDCWoodcraft]

Gary, glad you liked this one brother. Take a look at this video. It should help: kzbin.info/www/bejne/rZW0XpKeodGggbs

[@ftoobs.5237]

Thankyou. Loved this video. Will watch again.

[@IDCWoodcraft]

Ftoobs, I am glad this video helped you brother. Watching it a second time should really let it sink in.

[@brucemunro9623]

I've been using Carbide Motion up till now but being a big Garrett fan I thought i'd give G sender a try. I really like it and have even started using my Triquetra touch plate again which was just gathering dust. A big thanks to Garrett and Sienci.

[@IDCWoodcraft]

Hey Bruce. Gsender is pretty awesome compared to the others. I'm glad you switched.

[@mohammadlateef7543]

thank you very much for explaining the most things that I've been locking at . great work

[@IDCWoodcraft]

Hi Mohammad. You are welcome. I am so glad this is helping you!

[@brandonramjattan6302]

Thank you for taking time to make this. I've had my CNC for almost and year and have not used it yet because I was not confident enough to use it. With this video, I believe I can start. Great video and once again, thank you!!!!!

[@IDCWoodcraft]

Hi Brandon. I'm glad this video gave you some confidence. there is not more time to wait. We never know until we start. A year is long enougn. GO FOR IT BROTHER!

[@stevefield1985]

Garrett... This was a great video... I got a small CNC Router (3018 Prover) and after assymbly was confused by all the software... this video made it easy and I actually cut my first few practice pieces this weekend (yes the circle and square and some others of my own design). I think I watched this video at least 3 times. Thanks for showcasing Gsender... much better, more intuitive software than Candle that was supplied with my machine... what a piece of crap!! Gsender is really a great piece of software!! Totally hooked on CNC Routering now!! Cheers! Steve

[@IDCWoodcraft]

Steve, thanks! Glad it was helpful my friend! A lot of folkes tend to like gsender a little better, I'm glad it's been easier for you brother!

[@OveranalyzingEverything]

I have the same machine as well. I was wondering if you use the z probe with it. Was a little complicated with candle so I used the paper method with mixed results. Wondering if it's easier with gsender.imma try it out later

[@neilgettig2877]

Excellent! Thank you

[@IDCWoodcraft]

Niel, you are so welcome.

[@martinmaintenace522]

I am so thankful for your tutorial video. I will be working, learning on small Hammer HNC 47.82 router from Felder, also downloaded Vectric, seems like great software. Thanks you.

[@IDCWoodcraft]

Martin, glad to have you here brother! Welcome to the wonderful world of CNC.

[@zahraakorani1014]

This is very helpful, thanks!!

[@IDCWoodcraft]

Zahraa, you are so welcome!

[@tim-hypnotherapist]

This is a needed instruction. Also, thanks for your story and I am glad you made good decisions.

[@IDCWoodcraft]

Hi Tim. Thank you. I am glad as well.

[@davidsoto1687]

Awesome video tutorial, thank you Garrett

[@IDCWoodcraft]

David, you're so welcome! Glad to help!

[@09vrodz]

Excellent video

[@IDCWoodcraft]

Smitty smit, glad you liked this one brother!

[@dougengle6299]

Thank you for this video I just ordered my Longmill and I always take so much away from your videos

[@IDCWoodcraft]

Doug, you're so welcome! I'm glad I could help! Congrats on ordering your longmill, I can't wait for you to get it in hand and see what you create!

[@joell439]

Great tight summary…… I immediately subscribed and look forward to viewing future (and past 😉) content 👍👍😎👍👍

[@IDCWoodcraft]

Jowl. Welcome to the community! From what I've been told, you will get a lot out othe videos I make for you and other CNC'ers. I hope you feel the same sentiment. Of course, I'm always open for suggestions.

[@68HC060]

Great video. I watched the entire video - even though I knew most of this already. There are a few things I think you will want to try. Thin double sided tape instead of CA-glue: Do not use double-sided foam tape, because it'll make your Z-homing inaccurate. (which matters a lot if you're milling metal). When using thin double-sided tape, you will still need to sandwich it between masking tape, but it'll be easier and quicker: 1: put the 3 strips of masking tape on the bottom-side of your board. 2: put the 3 strips of double-sided tape on top of the masking tape (in the center of the masking tape if the double-sided tape is narrower) 3: put the last 3 strips of masking tape 'upside down' on top of the double-sided tape. 4: Flip the board and put it whereever you like. Another great tip I got from someone, is not to "plunge" the router-bit into the work piece, but instead slowly lowering (sinking in) while routing (for instance if routing in a line, at the beginning of this line, the bit is just touching the top of the work piece, but at the end of the line, the bit reached the desired depth). If making a 20mm diameter hole, you might want to use the above technique combined with a bit that's less than 20mm, so that - say a 12mm bit will be cooled better as there's more air around the bit while it's routing. (in other words: smaller bits might last longer if doing two passes than larger bits using only one pass). If routing hardwood, compressed air can be used to cool the bit. The last 3 tips do not apply to wood as much as metal, but I find them worth mentioning if someone can benefit from them.

[@IDCWoodcraft]

HiSpy, wow thanks for such a thoughtful response and the tips my friend. I'll be sure to try these out!

[@68HC060]

@@IDCWoodcraft I'm happy to help - I enjoyed your video a lot. =) Note: Some cheaper CNC routers use threaded rods. These can get stuck and are also inaccurate (they're not ideal for CNC machine). Getting a lead screw (or preferrably a ball screw) is a much better choice. -Then again ... a threaded rod is cheap and most people can afford that when just starting and learning the machine. ... So if at some point the machine is acting up, check to see if it's caused by the threaded rod and change it to something better if it's time to "upgrade".

[@zincyellowmach1523]

I wish I had had this video when I started, great stuff!!

[@IDCWoodcraft]

Zincyellowmach1, thanks I'm glad to help! I'm sorry I didn't catch you sooner!

[@zincyellowmach1523]

@CNC Routers, Beginners & Beyond - Garrett Fromme I still learned a couple things and your other videos have been very helpful. As I watched this video I kept thinking, "yep, learned that the hard way!" 🤣.

[@adrianuseche3125]

Thanks for this video. I finally understood many doubts related to different topics👍

[@IDCWoodcraft]

I'm glad to hear this Adrian. It is alway the confusion that gets us in trouble.

[@mikejones-km6fc]

Don't every get in that box again, we need your talent and patience for all of us newbies in cnc.. thank you

[@IDCWoodcraft]

Hey Mike. I promise I will stay out of the box. Not willing to go there.

[@xukongjing9470]

You explained it so well i didnt need the deer head but the pocket cut is different so i had an aha on that

[@IDCWoodcraft]

Noah, thanks I'm glad I could help! I love hearing about those aha moments! Keep up the good work!