CNC Turning Programming / How to write CNC Turning Program / Turning Program for CNC Lathe Machine

[@srijithist]

Wow wow...brilliant ...! past so many years of doubt it's clear in matter of seconds

[@excellentideasineducation]

Thank you

[@asuila4532]

I like your explanation. I give you 👍

[@excellentideasineducation]

Thanks you

[@pavankumarc910]

Useful video for me ..I learnt how to write program thank you

[@excellentideasineducation]

Thank you.

[@sakthiganapathy1901]

@@excellentideasineducation Please explain in siemens contour turning programming classes. It's too difficult to me. Please explain these model programme in siemens

[@saikumardarnaboina8094]

Nice madam.........Plz show full rough turn also.....This was easy single tool pass.....

[@anandamn3942]

Nice mam. Simple and easy program.

[@excellentideasineducation]

Thank you

[@BonaRasmey]

❤excellent 👌 does this program works for any turning machine??

[@frankmahachi8747]

Your calculation of z value from diameter 16 to diameter 32 is wrong. Fix the error please.i however enjoy watching your videos too.

[@excellentideasineducation]

I don't understand your question.

[@venkateshmohan3906]

Mam thank you so much.. I can easily understanding the program mam 🙏🙏

[@excellentideasineducation]

Welcome

[@sakthiganapathy1901]

@@excellentideasineducation KZbin guys are not mentioning the raw material details in siemensradius 8 is not possible. Please try it in siemens.

[@Alexander88888]

Thanks 👍

[@excellentideasineducation]

Welcome

[@Alexander88888]

Please send cnc traini software in discription madam

[@excellentideasineducation]

Right now I don't have CNC software. I will check and let u know.

[@ghotrasingh69]

Nice

[@apex0725]

Nice explain thanks it will help alot

[@excellentideasineducation]

Thank u and keep watching.

[@ck6177]

upload more cnc Turning videos .please

[@excellentideasineducation]

Sure...I will upload soon

[@ck6177]

@ waiting🤩

[@cesarmolina2328]

Would this still work if you were programming it directly into the CNC or do you need the CAD CAM software?

[@excellentideasineducation]

This program works directly in CNC.No need to go for CAD CAM software.

[@abdulqadirleelwala5864]

it would not be a good idea to use it directly on the CNC m/c, in this program multiple passes are required to execute this design without damaging the tool.

[@ashifaliannigeri3182]

After z45 in this diagram taper is there so which code put on it

[@japhatkorowa]

@excellentideasineducation there is taper....can you check this

[@xtrma1731]

how to calculate r2 z-1 and r18 z-10 without knowing the starting point on x?? (r2 and r18 are on the same piece and are consecutive one after the other)

[@pheidosify]

Shouldn't x value be 32 after radius? 16 + 8r + 8r = 32 ...?

[@excellentideasineducation]

X value should be 30 only.Pls draw the drawing as per dimensions & check X-axis value.The dimension mentioned in the program was correct.

[@ShivaKumar-ou3gb]

Thanks madam

[@makanjamanyama699]

Madam we taken absolute at the center(0,0) means the cutter start at the center , why we used diameters (16,30 ,40) instead of radius (8,15,20)? help

[@excellentideasineducation]

By default diameter is set in CNC. So that we took the diameters (16,30,40) instead of (8,15,20). If we sets 16,30,40 mm deflection in x-axis,the actual deflection goes to 8,15,20 mm in x-axis.

[@niraztiwari1035]

@@excellentideasineducation its depend on cnc parameter setting

[@sunilraj.kh07]

mamm z10 r 8 it is possible ....?

[@excellentideasineducation]

Yes..it's possible

[@banasiddhapatil805]

In coordinat 3-4 point mam u can check it

[@banasiddhapatil805]

In redius 8 turning to take 32 not 30 because in x axis the dimension is double

[@excellentideasineducation]

Draw the drawing as per dimensions & check x-axis value.The dimension mentioned in the program was correct.

[@frankmahachi8747]

Your second z.value is -7.93 or -7.94 if you round it off. From diameter 16 to diameter 30 at radius 8 ,will not blend smoothly. .that's what I was saying. We may get away with it as the difference will be 0.06 in radius or 0.12 in diameter.

[@furiasticfury1113]

Mam is it is incremental method

[@excellentideasineducation]

It is absolute method (G90)

[@sachinharigenalli5810]

Can we start the program at N01 there's any problem mam

[@excellentideasineducation]

Yes,we can start at N01,N02,N03...goes on

[@spavle]

G71 and G70 FTW!!

[@shallbipoulose5688]

N22 z-68 only requred becouse N21 X40 is there

[@zywicazywica1]

N15 crash machine madam

[@sushantgunjal5699]

Madam, From which book question is taken ?

[@excellentideasineducation]

From Engineering CAD/CAM

[@bulletsahabuletsaha8412]

Lekin uhapar 7ka redis lagaya medm 8 ka nahi

[@ShivaKumar-ou3gb]

I have doubt ma'am. Why don't you take zero return?

[@excellentideasineducation]

Are u asking before end of the program?

[@vijaysinghgocher6330]

Aaj uchi rkho

[@PraveenKumar-xl4ul]

Coordinates (0,0) We goiing upper side than coordinates (8,0) but u write 16,0

[@excellentideasineducation]

If we set (16,0) coordinate in x-axis,the actual coordinate goes to (8,0) in x-axis.It depends on CNC parameter settings.

[@Ánhlamthue]

Helo

[@excellentideasineducation]

Hi

[@benjaminfosu9454]

Hello, I'm a beginner, can you please leave your email for me to send you some shaft to help me out with the codes?

[@excellentideasineducation]

[e-mail]

[@mggenius5571]

Mem Hindi me bataiye na apni Matt bhasa me