the perfect amount of time spent on each step and no mind numbing music. thank you..
@nizanhorsefield2 жыл бұрын
The whistling even went well with the video 😂
@Texlex615 ай бұрын
On March 20, 1982, at the age of 20, I was a new machinist (2 months) operating a manual 36" Bullard VTL, after having operated a large manual hydraulic drill press for the previous year+. I worked for a small company that remanufactured wellhead equipment, but we also made new wellhead articles from forgings. That day, I was making my second pass (maybe 0.020" depth) at cutting threads (8/inch API) in the bore of a 7 1/16th" 15,000 lb.-rated wellhead flange, that I had already machined from a near-net-finish forging on the back side, when something caused a chip in the cutting edge of the threading tool (maybe hit an inclusion and chipped?). The shavings went from forming a harmless ribbon ball in the center to a jagged, deformed shaving that shot straight out between the jaws and slapped me harmlessly in the hip. Because it was a manual machine and the threading tool was traversing down toward the table in the vertical turret at 1/8" per revolution, I stepped back and grabbed the lever to disconnect the traverse and keep that vertical turret from engaging violently with the spinning table. Unfortunately, the shaving string extended farther out and, luckily dropped lower than my hip (or waist or thigh) and snagged my pants behind my left knee and cut through my peroneal nerve, which operates the muscles opposite the calf and provides feeling in the skin on the top of the foot out to the toes and up the lateral side of the shin. I went by ambulance to a nearby small hospital, where the doctors started discussing a surgery, but my brother-in-law arranged for me to be transferred to Hermann Hospital (now Memorial Hermann), in Houston's Medical Center. That evening, I underwent surgery to repair the cut and reattach the nerve. The neuro surgeon was Dr. Michael Minor. The orthopedic surgeon was Dr. James "Red" Duke, a well known Houston E.R. surgeon. Dr. Duke was in the E.R. as a Resident Surgeon on 11/22/1963, with Kennedy and Texas Governor Connally (generally credited with saved Connally's life). In subsequent years, he was frequently called on to give medical commentary to Houston media. Later, in 1987-88, a TV show, based on Dr. Duke, called "Buck James" and starring Dennis Weaver, ran for 2 seasons. It was about a West Texas doctor working in a NYC hospital. My brother-in-law was able to get me to Dr. Duke because he had previously been a paramedic in Houston's Fifth Ward for over 8 years and had brought many E.R. patients to Dr. Duke and that relationship got me on Dr. Duke's agenda that evening. It took about 18 months, but I did regain a bit of function from the shin muscles and have since only had a modest limp, not usually noticeable to others unless I'm tired or stumble. I saw Dr. Duke a handful of times after my treatment ended. He had an apartment in the hospital and I ran into him there several times when I was there. A couple of those times was when my daughter was there to give birth to one of her 4 children. A couple of those times, I reintroduced myself to him and gave him the 15-second version of our initial meeting and he said he remembered me (probably primarily remembered my brother-in-law). The last time I saw him was in 2014, when he was ~86 years old and sitting alone at a table in a Thai restaurant in Houston’s Rice University Village. As I was leaving, I reintroduced myself to him and gave the 15-second version of our initial meeting and he, again, said he remembered me. I noticed he was reading book published in 2014 and entitled “The Bonobo and the Atheist: In Search of Humanism Among the Primates.” He said it was very interesting and very thought-provoking, which I found interesting, coming from a man that had a divinity degree from a Baptist college. He struck me as a wise and sober man with a gentle and contemplative mind. I wish that I had stayed longer to chat about the book and what he took from it, but I was reluctant to intrude any further on his privacy. He died less than a year later, in 2015. If you read to the end and enjoyed it, check back with me, if you want to read more of my stories.
@Mike444604 жыл бұрын
Brings back memories, I can smell the coolant and hot chips.
@1175ld4 жыл бұрын
For me too. We had a 120” King where I worked. Used to really setting it up and running it.
@1175ld4 жыл бұрын
O
@Half-People3 жыл бұрын
I can still hear the old man yelling because we can't cut metal any faster.
@jimsperlakis56342 жыл бұрын
Me too, And the hot chip that gets your lip !
@charliemyres54503 ай бұрын
What a superb machine and an equally good movie to go with it!
@AlexC-tc7em Жыл бұрын
as a civil engineer with mutiple construction/machinery related interest, this really soothes me
@zalamachineshop4 жыл бұрын
Chris another great video of your fine turning skillz. Your channel is starting to take off like a rocket. Keep them videos coming.
@ChrisMaj4 жыл бұрын
Thanks man. WESOŁYCH ŚWIĄT, SZCZĘŚLIWEGO NOWEGO ROKU, co by się biznes rozrastał.
@farhad_khokhar3 жыл бұрын
@@ChrisMaj hi sir I want a job, I have 5 years experience and now in my country i am jobless
@Maloy78004 жыл бұрын
8:30 Someone's whistling the dance of little ducks. :-))
@mrt63994 жыл бұрын
Love it, as a Machinist my self I appreciate your work
@ChrisMaj4 жыл бұрын
Thanks man
@davemanley87004 жыл бұрын
I ran a cnc Bullard with a 56" table and a Fanuc control for 7 years and made all sorts of things from a controllable pitch propeller hub to pulleys for arresting cables on air craft carriers to water jet parts. It was the best and most interesting 7 years in my 45 years as a machinist / tool maker.
@michaeltyre383 жыл бұрын
I was a machinist with Michelin for 11 yrs after 4 in the Navy, I operated various machines but mostly the VTL’s , made tons of chips. Spent the next 20 yrs in maintenance at the tire mill.
@TheMwillis9118 ай бұрын
There is a job by me hiring this for 42$ hour ! Do i need school for this or can i learn on the job ?
@mp5kfisher2412 жыл бұрын
Was a machinist for over 20 years, had to medically retire because of spinal injuries, i miss it so much! I was mostly a turning center and VTL/VTC operator, the only thing i don’t miss is the lifting and straining.
@lascachadasdechepeabelelca3176 Жыл бұрын
I think the same , I miss turning and threading but no the lifting and straining .
@TheMwillis9118 ай бұрын
There is a job hiring near me for good money doing this can i learn this on jobsite ?
@ronalddamp27453 жыл бұрын
Even now at 72 yrsold i still use a 72 inch webster n bennett machining large stainless forgings here in uk
@stephenwebster13683 жыл бұрын
Yu should be well retired mate get a life and relax walk on a beach. Give the youngsters a chance!! Stop being greedy!!!!
@airgunningyup4 жыл бұрын
the feet per minute is unreal! awesome
@BruceBoschek3 жыл бұрын
Always worth watching! Thanks, Chris.
@forrestgumpv90497 ай бұрын
I never had much luck with Spade drills, but you did very good.
@dennybowman26414 жыл бұрын
Almost looks like the process for the mrap turret bearing. Miss running an old Olympia. Nice looking finish, it soooo shinnney lol. Keep them chips flyin brother
@martinS-vn3wy3 жыл бұрын
Makes me remember back in the 1970's as an apprentice. I got put on a 120" Webster and Bennet vertical boring machine to machine some castings, it scared the f***ing c**p outer me..lol.
@michaeljohnson-li5nn3 жыл бұрын
My first venture into programming a CNC machine tool was on a Webster & Bennet vertical turret lathe. We used it to machine overhead crane pulley wheels from a forged ring of material. Happy days.
@backho123 жыл бұрын
Wonderful video showing depth of cut and feed rates.
@ChrisMaj3 жыл бұрын
That was long time ago. I was just kind of posting some work I did. Lately my channel picked up more interest so I'm trying to post more often now,
@backho123 жыл бұрын
@@ChrisMaj Love VBM’s especially when they’re equipped with a live spindle. One of these days we’ll see some Y-axis VBM’s hitting the market.
@stahlhardt72014 жыл бұрын
Besser geht es nicht mehr Perfekt, absolut perfekt! BRAVO !!!
@tuantq064 жыл бұрын
I used to run a VTL OM 80 inch chuck. Kinda fun to play with.
@SapphireEngineering3 жыл бұрын
I have a conventional 1 metre VTL. Runs superb.
@thebee224 жыл бұрын
That's a good workable piece of the big vertical.
@leonardzielewski27442 жыл бұрын
Beautiful finish
@jahworks64662 жыл бұрын
World class work.
@IstasPumaNevada3 жыл бұрын
I caught that whistled rendition of The Chicken Dance. :)
@reefkeepers2503 жыл бұрын
Brings back memories of retaining rings we would swap out on the end windings of generators .... power plant size generators. Heat those things up to 600*c to get 0.04" growth for a shrink fit.... memories 🤔
@1962hellen3 жыл бұрын
These videos are so relaxing
@garylarson63863 жыл бұрын
vtl's are amazing, the temps run the 10,000 part jobs and the real machinest run the vtl
@Michal_Sobierajski4 жыл бұрын
Nice work 👌🏻
@rainemanusa3 жыл бұрын
So satisfying to watch..
@josegomezmartinez33803 жыл бұрын
Nice work!! Thanks for sharing
@ChrisMaj3 жыл бұрын
Thank you! Cheers!
@rodrigomolina54754 жыл бұрын
Perfecto mi amigo Chris ver esto me emociona Saludos desde Torreón Coahuila México 👍👍
@sergiojavier21124 жыл бұрын
Ok, Chris good but I would like to ask did you put an indicator on your finish part before you release the jaws how much movement on the materials. Because if the indicator gave readings then the dimension changes once you remove the finish part on the machine.
@albertofraire81744 жыл бұрын
Saludos al de Torreón soy lagunero también maneje ese torno si no me equivoco es un Honor y creo que es fresador tambien
@23shelleng3 жыл бұрын
I am impressed good work
@alysongr4 жыл бұрын
Nice video, nice job!!!
@emmitunderwood95024 жыл бұрын
At work we just bought a new 12' bed Toshiba and it is one hell of a machine
@vinodhsubramanian33634 жыл бұрын
Chennai toshiba-va?? Youji vtl??
@vinodhsubramanian33634 жыл бұрын
UR name??
@nemesisbreakz3 жыл бұрын
Those are perfect chips coming off.
@shug8314 жыл бұрын
Fond memories of working a 48" NC Webster Bennett many years ago.
@AhmadMabruriBBeruri3 жыл бұрын
Wow! How many tools and how long did it take for the whole process?
@ravidahiwala84103 жыл бұрын
Chris Great work 👍Can you show fixturing closely?
@UkraineTrain213 жыл бұрын
Nice work. Are those threaded holes blind? You should use a spiral flute tap in that case. To pull the chips out the top instead of pushing them down.
@Davemcmasters4 жыл бұрын
Show the tool changes more. That's a cool feature I've never really seen on a video before. What machine is that?
@ChrisMaj4 жыл бұрын
Vertical Turning Machine, Yama Seiki GV-1600m
@roaldacero48762 жыл бұрын
Almost same machine i used to handle when i was working in Dubai Uae before,Cnc vertical lathe machine VTC .
@bostedtap83994 жыл бұрын
Very impressive machining, difficult to visualise the actual size, even though you list the material and drill dimensions. Thanks for sharing.
@ChrisMaj4 жыл бұрын
Banana for scale 😉
@bostedtap83994 жыл бұрын
@@ChrisMaj 🍌🍌. This size 🤗. Showing the chips being carted away would scare some people though, serious metal removal. Great videos. Regards John.
@ChrisMaj4 жыл бұрын
@@bostedtap8399 Thank you sir.
@glennedward22014 жыл бұрын
Bosted Tap were small and a 90 gallon container stuffed with aluminum chips gets heavy every week. Better than 180 gallons of birds nest and wasted space 🤔
@thomasgiovine22114 жыл бұрын
Looks like GE segment ring that i used to machine
@stevezickefoose85633 жыл бұрын
8:23 :) whistling
@asdfdfggfd4 жыл бұрын
How do you get the job where you go around and change all the inserts?
@dorababubudithi85064 жыл бұрын
I like engendering work
@jamesschoeman34504 жыл бұрын
Enduring*
@bigbob16998 ай бұрын
How long did the job take ? If you want to try a different tapping oil , try mixing soluble oil with white lead if you have it .
@BruceBlazeDMV4 жыл бұрын
First CNC lathe I ran was a Seiki VTL with a 60” diameter table. This machine looks almost exactly like the vertical I learned on. The chip bed and everything looks the same. I’m interested to know if it is. Honor Seiki VL-160CM was the model I learned on!
@ChrisMaj4 жыл бұрын
It's a GOODWAY Yama Seiki GV-1600m 63" table.
@WK-hd9nv2 жыл бұрын
Can you explain as to why you centered drilled before using those large drills? Those large drills don't need to be centered drilled.
@sdavidjohnson444 жыл бұрын
How close are your tolerances and do you maintain good concentricity with this retainer ring. I use to make parts like that on a manual kick Bullard. Putting in a large radius was always tricky but a kick Bullard allows you to control your RPM's.
@ChrisMaj4 жыл бұрын
The tolerances were not that critical +/- 0.002" ,but I got it done within 0.001" on flatness and circularity (roundness) just have to be really careful how much pressure you put on your jaws.
@07evgeniy4 жыл бұрын
Which cutting data you are used for this application?
@szuler6664 жыл бұрын
He he ja to bym musiał ten pierscień na dwóch maszynach robić .
@matthewchapman2494 Жыл бұрын
That's just awesome machining work!!!! Od and ID. Question... did y'all make those tool blocks?
@ChrisMaj Жыл бұрын
If by tool blocks you mean the tool holders where you clamp the tools than no ,they came with the machine.
@Nordlicht884 жыл бұрын
Nice Job Man! Thanks for this Video. How long did the whole process take?
@ChrisMaj4 жыл бұрын
I only made one piece and I don't remember exactly how long it took. I'm a one guy do it all, setup, get the right tools, programming and machining and we are a repair machine shop so nobody is watching you with a stopwatch just to save couple of minutes.
@Nordlicht884 жыл бұрын
@@ChrisMaj Thanks for the answer. I just wanted to know how long the whole process from blank to finished part takes? Approximately. ;-) Such videos are very interesting, but I can't imagine how long it will take. Greetings.
@grumpyg93503 жыл бұрын
Fun to watch👍👍👍👍👍👍👏🏻👏🏻
@07evgeniy4 жыл бұрын
Please tell me how is supplier for inserts? and which geometry you are using?
@johnnybodank9594 жыл бұрын
I haven't seen any videos on how to use this type of jaws, do you just manually open and close them with a wrench to center part then torque them all tight? If so, how many ft.-lb. are you tightening them at?
@pickerjim92463 жыл бұрын
Manual tighten..tighten all you can...use cheater bar..
@fubartotale33893 жыл бұрын
Several years ago, in a shop outside of Chicago, an operator got caught up in the clamps holding down a large valve body on a 6' diameter VTL. It's a big shop with lots of distance between machines. Nobody noticed right away, he must have been too surprised and dead too soon to call out. Never defeat the safety interlocks on your machines, ever.
@julioalbertorodriguezovall4853 жыл бұрын
A los 18 años trabajaba en un torno vertical shibaura máquinas rodetes para turbinas, carcasas para bombas , tazones, chumaceras, impulsores, cabezas de compresores, camisas, poleas , después de eso e trabajado en muchas máquinas CNC de varias marcas tornos , centros de máquinados, mandriladoras etc.y fabricado infinidad de piezas de todos tamaños y me quedo con mis primeros años donde empecé de cero donde me enseñaron a programar y donde me dieron la confianza
@samaelyhwch83314 жыл бұрын
Very nice
@shirolee3 ай бұрын
Unbelievable!
@DavidHuber636 ай бұрын
Awesome
@gwharton683 жыл бұрын
Enjoy your videos very much. I get the impression that you are located in Poland or some other part of eastern Europe. Why do you use imperial measurements instead of metric?
@ChrisMaj3 жыл бұрын
Well actually I'm Polish and Poland is all metric, but I work in the US.
@imadahmmad19653 жыл бұрын
Amazing
@Adiiii874 жыл бұрын
True 9Gagger using Banana for scale. Thanks.
@peachmelba10003 жыл бұрын
Quick spindle speed, or optical illusion?
@elijahgreenberg2634 Жыл бұрын
So, for the drilling, I'm assuming it's only X and Z travel, and uses rotation of table for "Y" positioning? Also, how many different tools can the machine hold? Can it do milling, or only drilling/tapping?
@ChrisMaj Жыл бұрын
It can hold 16 tools, 8 for turning and 8 for milling. Yes, it can do milling, drilling, and tapping just like any milling machine. kzbin.info/www/bejne/m4W1mZ2vo5d-jsk
@StefanoLinguanotto4 жыл бұрын
6:42 looks like built up edge, maybe spindle speed too low? Doing the math is 31 m/min, more like HSS speed than carbide speed... I guess it's for tool life but it may chip the insert sooner. But for sure it has worked fine. Nice job!
@ryanb18744 жыл бұрын
Yea wouldn't it be nice if you couldn't go too slow, but you can, and I didn't know this until recently
@sunppaa4 жыл бұрын
Awesome stuff! I imagine you must be careful to not overtighten jaws on a job like this?
@ChrisMaj4 жыл бұрын
For rough turning I use little bit more strength, for finishing I'll go easy on the jaws.
@davemanley87004 жыл бұрын
Yes the machine I ran had an adjustable hydraulic 4 jaw chuck and using a dial indicator to sweep the part being careful not to over tighten and distort the part.
@sdavidjohnson444 жыл бұрын
@@ChrisMaj Very good answer. After roughing and part has cooled and ready for finishing you will see how much it sprung when you indicate it for concentricity and flatness.
@gaetanbellavia87023 жыл бұрын
Top tools la précision mécanique
@bapakayabengkel3219 Жыл бұрын
👍👍👍👍
@rhcpfan1424 жыл бұрын
All of the Cnc lathes where I work are 3 jaw, I’m sure they can change over to a 4 jaw chuck, but what is the point of having more jaws? More accurate? Is that why you are using the indicator? Just curious. Beginner Cnc operator.
@ChrisMaj4 жыл бұрын
Yes they are more accurate and you can do some odd shapes kzbin.info/www/bejne/m3SalGeJf9CtsLM
@chatnik784 жыл бұрын
Thanks for the Vid 👍
@ChrisMaj4 жыл бұрын
No problem. I think I might have to invest in better video equipment 😉
@diditwork3704 жыл бұрын
@@ChrisMaj save you money man your shots are 👌
@schummiehugo4 жыл бұрын
i love big toy,s
@xsarchitect2 жыл бұрын
When to use coolant or not?
@anakin333d3 жыл бұрын
The drill rpm can increase ?
@johnnypk19634 жыл бұрын
R the cutters w/o coolant being sprayed on the cut cooled at all? Considering what a big cut they r taking it seems like they would overheat.
@ChrisMaj4 жыл бұрын
I did use coolant, I'm just trying not to use it while recording.
@Icutmetal3 жыл бұрын
Not always necessary with steel, depending on workpiece tolerance.
@jawadibrahim23674 жыл бұрын
It appears to me that VTLs are mostly used for large diameter short pieces. But I wonder, can they turn long pieces of work?
@ChrisMaj4 жыл бұрын
On that VTL I can turn up to 51.18" ( 1,300 mm )
@jawadibrahim23674 жыл бұрын
@@ChrisMaj that's quite respectable, thanks for the info.
@fernandoaraujo87923 жыл бұрын
Em 1992 eu trabalhei com torno mecânico vertical em São Paulo, agente fabricava flanges
@D080484 жыл бұрын
👍👍👍🔥
@paulbennett63794 жыл бұрын
Like the big stuff good vid
@25-kishornavsupe43Ай бұрын
Which material is there you were machine ?
@garfl9114 жыл бұрын
Hi Chris what is the size of your vnmg 400 or 500 series and the brand is mitsubishi i think.and finally i just received my gv-1200 the thaiwan guy moint it actually and every time i ear la dance des canard je ris.bonne journée.
@ChrisMaj4 жыл бұрын
It's a VNMG400 and the brand is KORLOY .
@DudeInWalmart4 жыл бұрын
What is it for? Tank turret?
@ryanb18744 жыл бұрын
Sweet
@muneebirfan28072 жыл бұрын
please tell me how to write tapping program. I don't know how to use it. I've searched alot. I've machining center kitamura my center.
@skatewithvanz3 жыл бұрын
I run a manual 56" table bullard VTL fun shit
@anandamn39424 жыл бұрын
I have observed vtl in industries . But willing to do it myself.
@Cleav7274 жыл бұрын
They are some big chips! It sound like machine gun casings falling about the place.
@wings8084 жыл бұрын
What brand and model of the machine is this Chris?
@ChrisMaj4 жыл бұрын
Yama Seiki GV-1600M
@Dombada13 ай бұрын
Nice but I think it is more depth at roughing possible.
@rasmusandersen20074 жыл бұрын
Good ive made way to many of those.. :(
@roncarter21882 жыл бұрын
Nothing like taking off a quarter of an inch at a time and a big old blue chip landing in your boot!!!
@ChrisMaj2 жыл бұрын
In my boot never, in my shirt more than once. Fun times.
@charliepearce87672 жыл бұрын
Thats fast cutting speed....big time! Whoops...i took 10 mm to much off the the job....
@mcobriet53082 жыл бұрын
Daora essa usinagem em
@abubakar594 жыл бұрын
Crazy
@173roberto2 жыл бұрын
Is it possible to mill contours with that machine?
@ChrisMaj2 жыл бұрын
Yes kzbin.info/www/bejne/kGOtaKyNZbyke80
@hybridengine6179 Жыл бұрын
Where can I buy the newest model of that machine? Do they make a larger one?
@ChrisMaj Жыл бұрын
Yes they make them bigger. Check out Yama Seiki vertical turning.
@hybridengine6179 Жыл бұрын
@@ChrisMaj thx
@vijayapatil96652 жыл бұрын
Sir can you please make a video how to bearing outer side true on table 3600 please please sir