Co Print Chroma Set & Creality Ender-3 V2 | Upgrade Your Ender-3 V2 for Multi-Color Printing

[@C3DS]

It’s nice to finally get some updates and hear it is truly shipping out. Granted in the time it took this to come full circle from kickstarter I picked up a Bambu lab x1c . But it will be nice to have this in the line up and be able to compare print quality, use options, ease of use, and most important filament waste. But so-far teaser videos seem promising an looking forward to receiving and sharing my experiences. Good job 👏🏼 on coming through an your successful new product launch. 👍🏼👏🏼🥳

[@CRIZS_CREATIONS]

So Looking forward this. No More being locked to having to purchase a certain printer from a certain company just to have multi color. All the hard working public can finally have the opportunity print multi color 3d objects at home without spending thousands of dollars on a new machine plus a multi color Ams/Cms unit. Thankyou Co Print. This will change the 3D Industry forever more and into the future.

[@evFPV]

Wow! You have an amazing product!! Looking forward to see reviews from my fav 3d printing channels to see how it works and hopefuly buy one❤

[@scienceandmatter8739]

Where to get this in EU / Germany

[@MilanCvijanoviccviki86]

Does it work with Ender 3 v3 KE? 😃

[@92SarahM]

Its nice to see a video as a guide.I have a Creality Ender-3 V2 Neo, and when I was able to make the X-axe move, the chromahead did not reach the endstop. What should I do?

[@arnoldtorres1439]

Please make a video for the ender 5 s1

[@fatihkazmduymaz1251]

We will 🙌🏼

[@ercankoparan1625]

Is it necessary to calibrate again after making plugins? My current device is ender 3 v2 neo with cr touch. Can we install this on the incoming headset? Thanks for the answers

[@mauriciodelvalle4648]

The head has a sensor inside already.for bed leveling

[@dcoferraz]

what's the name of the bed plate that you're using?

[@meanw.6687]

Looks very nice.

[@jared1321]

Will it work with any ender starting at v2?

[@fatihkazmduymaz1251]

Yes 🙌🏼

[@rmt3589]

​@@fatihkazmduymaz1251Sweet! Looking at the v3 pro for the end of 2025.

[@GrumpyBrass]

I have a Neptune 3 pro and Max, what all would I need for the setup? Do I need the tablet? Or just the extruder, filament sorter and the tubes?

[@ebnr.]

Its work with ender 3 v3 se ?

[@fatihkazmduymaz1251]

Yes 🙌🏼

[@itsmemac]

Will there be mounting plate for mgn12 linear rail ?

[@huseyinozen4134]

for which printer do you need such a plate

[@itsmemac]

@@huseyinozen4134 I use MGN12 rail on my ender 3 on X and Y axis

[@itsmemac]

@@huseyinozen4134 there are official creality kits for the same

[@CoPrint3D]

Hello, plate will be sent according to the standard wheel bearing that comes with the Ender 3 V2 in the product box, as shown in the video. The design for the printable part for the MGN12 linear rail will be shared on our wiki page. You can print this part to make it compatible.

[@Justjoeycool]

It looks really cool and what brought me here was another long print on my Ender 3 v2 and looking for upgrade options. My ender sits next to my Anker M5C which is crazy fast but single filament, so of course i want to upgrade my ender 3. That being said and for the sale price on this to get my ender set up i can snag a Bambuu A1 with AMS for the same price. Id love to get my hands on this to give it a shot, and see what actual setup, functionality and print quality looks like, but i know what the quality of the A1 is, which makes this a hard sell.

[@xxoTUBBSoxx]

Would it be possible to still use if I install a Nebula Pad on my V3 SE? or needs to stay as Marlin firmware?

[@jackrenders8937]

does this have auto bed leveling?

[@mauriciodelvalle4648]

Yes it does per info

[@sergeantsapient]

It looks like it uses a Klicky-style bed probe for ABL.

[@robbyvanderplancken8246]

i was following this but for the price i buy a Bambu a1 with AMS, kobra3 combo x2 , even 3x full kameion kit so, great idea but after 2 very long campaigns kickstarter and indiegogo... stil in preorder .I hope the best even Sovol made it for the sv08 when they lunched that they work together with this system so i think its ligit but now almost every brand is bringing mms running on klipper onto the market so i pass paying 450-800 for a system that 3 years ago was a no brainier but today ....i do wish you luck..ps the links are giving 404 page not found and in the store all sold out...so nothing changed .

[@fatihkazmduymaz1251]

Thanks for your comments Robby, we didn't launch the store yet. I partially disagree with your comments about competition, we are not the same solution as the products you mentioned. We believe that the innovation we want to offer will be better understood in the market - by you too - over time. 🙏🏼🙏🏼

[@robbyvanderplancken8246]

@@fatihkazmduymaz1251 i really hope, i do not mind paying more for a better solution, and believe me when i say i do love your concept..and if Co print was available when i ordered the sv08 i would had ordered the full kit .

[@conradermig5601]

Can't wait 😄

[@RedNeck10193]

is there one for the ender 3 v1?

[@fatihkazmduymaz1251]

@@RedNeck10193 Very similar actually

[@RedNeck10193]

@@fatihkazmduymaz1251 do you have a link for the one the works with the v1

[@oscarrodriguez-nw4np]

Hello, does it have a filament sensor? I don't see the sensor anywhere, because if it doesn't have one, how could the machine stop? So as not to continue as if nothing happened? I hope you answer me quickly so I can buy it.

[@mauriciodelvalle4648]

Yes it does is on the head

[@oscarrodriguez-nw4np]

@@mauriciodelvalle4648 "Hi, the filament sensor is not included, so you have to stop printing manually." is the manufacturer's WhatsApp response, I really wanted to buy it, but that stops me.

[@Erosgenuino]

se podria instalar en una ender 3 s1 plus?

[@fatihkazmduymaz1251]

@@Erosgenuino Very similar…

[@sergeantsapient]

So if you've upgraded the firmware on your v2 to Klipper or are using the Nebula Pad from Creality, is the Chromapad still necessary?

[@chrisc1140]

Oh damn, and I was _just recently_ thinking of upgrading my ender 3 to multifilament since I have a new core x-y printer on the way. It's a v1, but unless there's a major difference with the firmware/mainboard nothing there seems like it'd be an issue on the v1?

[@OchoaMorganna]

Looks awesome, can't wait. But also **PLEASE DON'T CUT YOUR TUBES TOWARDS YOUR FINGER**

[@Viperwon]

good advice

[@brunocardoso2936]

I bought the kcm kit for my k1 ... I followed the instructions step by step to install it but it gives me an error. Klipper reports: ERROR {"code": "key341", "msg": "Section 'servo cp1' is not a valid config section Once the underlying issue is corrected there should be a place to help with the problems

[@electronicsandewastescrapp7384]

if you want this product to fly show it with large printers like the ender 5 plus or even the big-a$$ elegoo or troxy massive printers. It's the only area bambu cannot compete. How fast can it push plastic... can it use a super volcano.. these are the real questions.

[@ThePoyocoyo]

Hola, alguien mas tiene problemas con el eje z en la ender 3v2 neo? Porfavor digame como lo soluciono el problema del boton

[@TheBerkyuksel]

Çok güzel ama çok pahalı bir sistem :( yazıcıma almak isterim ilerleyen zamanlarda

[@GrinderFX]

That does not make any sense because the price is way to high and for the total price I could buy a Bambu Lab printer with 16 color support and way better quality. Was looking for my Ender-3 printer but in total its to expensive.

[@bibe602]

Same here, i just found an Anycubic Kobra3 with 4 colours for less than this one, and it s an entire printer, not only a module

[@andypuddle]

Exactly my thoughts too. It would be cheaper to throw my ender 3 pro in the bin and buy a new printer lol

[@oscarrodriguez-nw4np]

I send messages on WhatsApp and they don't respond, I send emails and they don't respond, I made the purchase on 10/12 and they sent it to another country supposedly with the UPS tracking number, I'm not sure if this is a scam or not.

[@Prinlab3d]

no envian para probar :D :P

[@fatihkazmduymaz1251]

Did you send a request?

[@CRIZS_CREATIONS]

Well by all account they shouldn't. Honestly the Public Backers has invested their money into the Company so it's only Right that the Consumers that backed and invested their money into the CoPrint launch be the first to test the products. Most Testers end up having pre finished product units that are either not complete and or have issues. This is pointless and sends a bad message to consumers were by so called Testers review the unfinished product picking faults at a product that is not complete anyway.

[@TodalKaos]

Why the hell would you buy this for the same price as the Bambu lab A1 Combo that comes with a AMS lite 😂. Buy this to upgrade your beginner ender series. Or switch to bambu lab combo and get both a 1000x better printer with an AMS system for the same price

[@Mykeone007]

This would be great for a cr10 max or a crm4...