Co-z sliding gate opener from Amazon what you need to know before buying!

I don’t go into a lot of detail as some KZbinrs have gone into detail that I didn’t what I will tell you is what they don’t and what is needed. This project took me 20+ hours 2 weekends plus trips to Home Depot. The garage door company wanted to make me a new gate and charge me $1000.00 I think I’ll do it my self

[@ezeleoni]

Thks you are the only one who explains that the magnets are not the same

[@lov2cyanaked]

Just make sure to mount 1 magnet low and 1 high compared to the magnet switch inside where the motor is. If you mount in middle the machine gets confused location of open/closed magnet.

[@Group_Anonymous]

THEY ARE THE SAME!!!!!

[@ezeleoni]

@@Group_Anonymous I finally got them right and you are correct they are the same

[@artgarcia6074]

Good job

[@RicardoGonzalez-kg2fn]

What’s the model number

[@Captgreatvalue]

@@RicardoGonzalez-kg2fn cg1400

[@emanoilfanea1392]

What's with all this zippers 😂😂😂

[@Captgreatvalue]

My gate was never meant for a gate opener

[@raymondjackson6069]

This guy is a real do-it-yourselfer, and hats off on the amazing improvisation to get it working. Get the basics and pretty it up later. Thanks!

[@JF-sv7qo]

Great video; thanks for The review. Did you end up changing the opener

[@Captgreatvalue]

@@JF-sv7qo no but I did remove the zip ties and bought a welder and welded it pretty good looks a lot better and cheap Chinese product still working great just have to paint the chain every now and than it rusts easily

[@edgarflores4249]

Can you pair the opener with you cars built in garage door opener?

[@Captgreatvalue]

@@edgarflores4249 it did not work with our Lexus so I’m gonna say it depends on the vehicle either that I didn’t know how to pair it the instructions say you can with any universal remote

[@diyhomeprojects7317]

I really appreciate you making this video; beats some of the other ones I've seen. I am on day 2 of installing my CO-Z gate opener and I was wondering who had written the instructions. Scratched my head several times, I even found an error. So your explanation makes sense. They could have done a better job on explaining the process regarding the electrical, the testing and also what do they consider left and right to be. There are too many inconsistencies. I used my common sense. I did have a chain breaker to shorten my original chain. The chains they provided are too short. Thanks again.

[@Captgreatvalue]

My pleasure

[@assaettone]

FYI the magnets are the same. There isn't an open and close magnet.

[@Captgreatvalue]

Yes but they are loose inside so one has to be higher and lower

[@jraymond3218]

Dude! You have a lot of faith in zip ties. Also, how is one magnet different from the other?

[@Captgreatvalue]

I eventually found a welder after a year and the zip ties were still good the magnets were loose inside and so if you don’t place them right the gate can’t tell if it’s opening or closing

[@lov2cyanaked]

Whatever works. You should tighten the chain up a bit to get rid of the slack.

[@Captgreatvalue]

Thanks update on it is I bought a welder and welded it looks a whole lot better and the chain is as tight as it can be bought a chain breaker kit

[@Derpherppington]

looks like sht

[@Captgreatvalue]

Ok bro than make your own video lol