Part 2 - Removing Subframe on a MINI R50 R52 R53 as removing Clutch & Gearbox series 🚗

[@CoatsandGaiters]

If you click "SHOW MORE" in the description above your be able to see Links to the Tools 🔧🔨🔧 I use. Also Clickable Chapters📋 📙 throughout the video and other Links 🎬 that may be of interest. I've had a few viewers request where they can buy the tools they see in some of my videos but it's not very clear that the "SHOW MORE" tab has a lot of information in that may be of interest. Admittedly the amazon links are associated with me and I would earn a small commission which helps towards keeping the channel funded.

[@acecin]

Definitely the best video of subframe removal

[@CoatsandGaiters]

Thank you for saying so. I try my best.

[@youtuberdad124]

I've only just found your channel Mark after purchasing my first Mini. The detail you have put into these videos are of the highest standard. I'll definitely be utilising the links you provided, and will be watching all your videos over the next couple of months. Thank you.

[@CoatsandGaiters]

Thank you for that lovely comment. I do hope they help you. They should give you a heads up before you start and what parts you may need to order before starting.

[@MrAnticaArte]

This is one of the best (probably THE best) tutorial I ever seen. Amazing job and thank you very much.

[@CoatsandGaiters]

Thank you so much for that Claudio

[@davepic]

You sir are an absolute legend, your videos are above and beyond and rival those provided by the likes of Haynes. i hope all those that view really appreciate the time and effort that goes into producing such a complete and easy to follow guide, and of course do like and subscribe. My niece has just brought a 2006 mini one that has failed it's MOT on front suspension bushes, so that's my weekend sorted. wish me luck.😉

[@michaelskillington9298]

Hi. I'm happy to say that removing the sub frame from my 2004 R50 was much easier thanks to your instructions. Following this video and your channel helped me immensely. Thank you. Mick

[@CoatsandGaiters]

That's great news Mick and thank you for taking the time to message that good news. I work hard to try and cover every detail however small it is.

[@youtuba2667]

Thanks for a brilliant video. I had to drop the subframe to change the inner ball joints (I was trying to do the poly 'infamous' bushes in situ but split the inner ball joints in the process!) One thing - I didn't bother removing the crush tube - still take the 10mm bolt out the front to the bumper, but after that they just come off fine attached to the frame.

[@CoatsandGaiters]

Thank you.

[@yassine6575]

Super travail!

[@MecanoDeLaCave]

Great video! I did that last week (as part as gearbox change), and a few notes: - rather than reusing the power steering fluid, it's a good idea to use fresh one to freshen it up a bit, especially if it's that black (it's originally green). While it has no service interval, it should be changed to avoid premature wear on the PS pump (a known weak point). Bonus: steering will be slightly easier (I did a full change a while ago and you can feel the difference, though it's not major) - on LHD, there are a few interesting differences. I did not need to unclip the O2 sensor (either clip was broken off or it's attached differently), and the steering column is on the other side, under the battery box.

[@CoatsandGaiters]

Totally agree with you on changing the power steering fluid. I'm a bit bad on things like this to save money but like you say. Saving money can cost you more in the end.

[@markfitzgerald3372]

Great detail and information. Thanks for taking the time to make this video.

[@CoatsandGaiters]

Thank you Mark for the compliment. I do try my best to make them as clear as possible.

[@lukemowbray4944]

Hugely informative video. Thank you.

[@CoatsandGaiters]

Thank you for saying so

[@lukemowbray4944]

@@CoatsandGaiters my pleasure. Going to be attempting this shortly🍀

[@basvandecamp4553]

Nice condensor. Wonder if it is letting any air true at all.

[@paulbrigham9287]

Great vid fella. Need to replace the ‘infamous’ bushes on mine. Would be great to have some indoor space for a couple of days to get them done. Keep going 👍

[@CoatsandGaiters]

Thank you Paul. I have done a couple of videos on renewing those bushes though it's easier to pop new Poly bushes in I believe. I did it again by dropping the subframe.

[@screwsnutsandbolts]

Excellent videos ! 👍

[@CoatsandGaiters]

Thank you for saying so

[@screwsnutsandbolts]

@@CoatsandGaiters You're welcome

[@neilhampson2843]

How much have you spent on tools over the years Mark. Don't even think of starting a list, it will get scary pretty fast. Another great video. You can tell it's getting colder when the woolly hat comes out. Keep up the good work.

[@CoatsandGaiters]

Thank you Neil. Sadly I could give an exact figure lol they are all on an excel spreadsheet haha. Not as much as you might think when you compare to how much a basic new car is. Tools are still working out a lot cheaper. Is getting colder now.

[@webweberma0136]

Wow, what a great video!!!

[@CoatsandGaiters]

Thank you

[@joshuashannon9629]

Brilliant. Would love to know just what was the "gunk" you sprayed on to clean the subframe. Also loved the reference pictures with locations and torque values. Cheers.

[@CoatsandGaiters]

Thank you. It was Gunk I used, the brush on one. Gunk is the brand name.

[@aazt5792]

hi great video again , i was waiting for the next episode , i like how much details and informations you give that's awesome , hope you open up the getrag gearbox to see what's look inside , i have a 2005 mini cooper with getrag gearbox and the REVERSE is a little bit stucky . thanks again and keep posting greats videos we like what you do

[@CoatsandGaiters]

Thank you kindly AA ZT. I'm really hoping I don't have to open that gearbox up lol Gearboxes feel like an area out of my league. I know someone that mends auto gearboxes and I look at him as a higher being haha

[@ferminmarquez7090]

thank you.

[@CoatsandGaiters]

You're welcome

[@gianfrancoapollonio213]

Maestro

[@enriqueorihuela8717]

Es un artista maestro

[@CoatsandGaiters]

Thank you

[@LuKa_schrauber]

👍👍👍

[@jonburton2038]

I'd love to come and help you work on your cars

[@CoatsandGaiters]

Thank you that's a very kind comment.

[@lambo723]

superbe voiture bien pourrie comme il se doit !!! horreur !!!

[@CoatsandGaiters]

Thank you for the compliment

[@lambo723]

@@CoatsandGaiters les allemands n ont pas fait mieux que les anglais !!! Ça rouille grave !!! Mais ok good mécano👍

[@CoatsandGaiters]

@@lambo723 everything is built down for profit over being better than another brand. ----"the Germans did no better than the English!!! It seriously rusts!!! But ok good mechanic"