Coax Cable Simple Tests (

The subject of simple tests to do on coax cable came up in last night's livestream. This video shows simple tests of coax cable you can do with a multimeter.
Subscribe: / davecasler . Ask Dave Playlist: goo.gl/inaQeB. Tip Jar: ke0og.net/tip-jar
To learn more about me, visit: www.dcasler.com...
Tip jar (on my website): www.dcasler.com... (provides a method to use your credit card via PayPal, Also describes Patreon)
To pose an Ask Dave question: www.dcasler.com... or www.ke0og.net/a...
To order the most recent and up-to-date Amateur Extra videos on a thumb drive: dcasler.com/aev...
Theme music is "Sour Tennessee Red," by John Deley and the 41 Players, courtesy KZbin Music Library.
I use drawings from OpenClipArt.org, including the "walking man"
Technician training videos, see www.ke0og.net/t...
General training videos, see www.ke0og.net/g...
Amateur Extra training videos, see www.ke0og.net/e...
List of the Ask Dave videos, see dcasler.com/ask...
Thanks to my sweet wife, Loretta, KBØVWW, for both audio and video assistance! (Her website is www.aldea-art.com.)
My primary website: www.dcasler.com
The ham radio part of my website (direct link): www.ke0og.net
My publishing website: www.mtsneffelsp..., where you can find my fantasy and science fiction books, as well as some local history books I publish for the Ridgway Railroad Museum and the Ouray County Historical Society
My Amazon author page, which lists my print and Kindle books: www.amazon.com/....
I'm often asked what equipment I use to create the videos. The devices include the Panasonic DMC-G7 camera, Panasonic HDC-TM90 video camera, GoPro Hero2 HD camera, Tascam DR-05 audio recorder, Audio-Technica ATR-3350 lapel microphone, Sony Cyber-shot DSC-W560 digital camera, the Kodak Zi-8 video camera, my iPhone 5S. Software used: CyberLink PowerDirector 17 on an HP Gaming Pavilion, also using Smoothdraw 4.0.5.0, FastStone Image Viewer 5.3, FastStone Capture 8.0, Audacity 2.1.1, LibreOffice 5.0.4.2, and Ink2Go 1.7.2. You can see how my studio is set up by viewing • Tips for Making Instru... .
Twitter: @dcasler

[@johnnorth9355]

Thanks Dave . Made it to the end of the video and typed this before rushing out to the garage to check all my cables ! 73's from the UK.

[@DorisMoisan]

One of the best video I've seen that shows multiple ways to test a coax cable. Big thank you!

[@kingduckford]

Thank you! This evening I was able to take down the antenna, swap out the LMR400 with the same length of 8x I had lying around, and the SWR's went from +3.5:1 back down to ~1.1:1, as it was tuned at. Quick proof something was wrong with the feedline, so tomorrow I'll take the multi meter to it and see exactly what the problem is. Not much of a coax assembler, but I guess I have to learn some day.... By far the best Ham channel on KZbin. Thank you again.

[@MichaelSmith-nk4yq]

Many thanks for showing the test with the led light, it’s a brilliant idea. I’m going to try that 👍🏾

[@evdyo]

This is one of the most useful and vital videos. Just carried out repairs on a long Messi pasolini cable and passed the test

[@duanecrecelius2789]

U

[@1crazynordlander]

These three tests will get you through life dealing with electrical trouble shooting. I learned these at a diesel mechanics trade school during our electrical systems training. Shorts, opens and grounds.

[@K4SRF]

Strangely enough, I was just discussing continuity yesterday and testing new feedlines. BTW, you are looking better and better every day! '73 / Steve

[@michaelpolimer2128]

Hi Dave Mike, K1FNX here glad you are feeling better............ something else to do is "hipot" test the cable........... I built up a very simple test fixture using two back to back 24 v doorbell transformers such that you put 120Vrms on the cable. Put a 60 watt incandescent light bulb in the primary such that if the cable breaks down the light bulb will light. If you are going to test the cables you might as well do everything just to make sure 73 and feel better

[@ky4tgtodd203]

Awesome! Thanks for sharing! It’s great to see you back in the saddle!! 73, KM4OCJ

[@JT-py9lv]

Been waiting all day. Thanks for taking the time to film, edit and upload.

[@jeffharting4138]

Important often overlooked topic.

[@jptucsonaz8503]

Hi Dave, So glad to see you looking better, I hope you are feeling much better too! Good vid as always. I really like the battery & light idea for long distance; one person testing. I'd like to add please, that when someone does the center pin to shield test, it is ALSO important to do a second test on that with the Ohm meter on the highest scale to test for high resistance leakage! During that test don't touch the probe tips or the coax connectors... if you have ANY resistance you have an issue - maybe moisture or a solder flux contact, or one or more improperly trimmed shield wires making a slight & intermittent contact. Back in the 70s, I built a project box w/2 so-239's, banana jacks (for the meter) & a few DPDT switches. I would connect both coax ends up & then go thru the sequence... then I'd do it again while moving the coax behind each connector to test for intermittent problems - and that was good, because back then I was still learning how to solder on those pesky pl-259's.. I found a few issues to fix. If I redid that project today, I think I'd add the remote test ability and also a signal injection port to do advanced RF frequency tests too. Can't wait for the next installment Dave! 73!

[@jalancour]

Love your alligator clip trick to test a wire that’s routed through many places! Thanks!!

[@ReedAB8AS]

Good Testing Ideas...thanks Dave

[@diyi75]

Lifesaving video here👍🏽

[@billlamb8944]

Thanks for the back to bacis. we all need a remider from time to time. Again a great show from the master. KD9HWH.

[@neilfoster814]

I like the LED light test, I'd never even thought of that one! 👍👍

[@joerogers4227]

Quality checks on electric cords also is important. Some years ago in Hawaii a co-worker was repairing a power cord and did not do any simple continuity or shorts test. Plugged it in and was instantly in contact with 240 volts. We had to kick the cord way from him. We all learned valuable lesson there

[@ProperLogicalDebate]

Can you cut a bad cable near one end? Tests good so you have a jumper cable. If bad, figure out how. Now you have a slightly shorter long cable to attach a connector that you want. If good then the short is somewhere in the length. Cut in half till you get to the point where you don't mind throwing away a length vs. the cost of connectors, etc.

[@chrissewell1608]

Dave always has a great ideas for testing something! Thanks Dave. 😁

[@davecasler]

Thanks!

[@fa18mhr]

Just a heads up Dave. I believe that the red lead on your multimeter is almost severed right at the plug that connects to your meter.

[@Clarkstonlife]

That's why I invested in a non harbor freight special

[@kc8wvg]

Thanks Dave. Another informative video. Having more time to spend in my shack since my retirement the information is very useful. I've been wondering about my buried coax that runs to my vertical so these tips will help. Take care and have a great New Year.

[@KE6DOA]

You’re looking better every day Dave and thank you for always keeping videos very understandable not everyone does that I had to make up a 125 foot piece of LMR 400 as well as 2 - 3 foot jumpers a month ago everything checked out good I even have the exact same Harbor freight tester I think I paid 7 dollars for like 20 years ago and even yesterday I had to check 2 runs of coax. 73

[@scott414b]

Dave Casler- just founf this video, my question, with the prices of decent cable being a bit pricey, is it possible to test a long run of cable and find out where exwctly it is bad?

[@lyfandeth]

Just a warning about Harbor Freight. I got one of those meters on a free coupon about ten years ago. It read 12.4 volts when my "good" meter read 12.0 volts. I wound up using a calibration source to testthem both. The HF meter was a full 0.4 volts off, which is 40% of a standard 12 (12.8) volt battery's power. After I calibrated it, no problem. But out of the box? You may as well use a test light!

[@reidtillery2856]

0:41 0:17 What reading indicates continuity? What reading indicates lack of continuity? What does the reading mean in terms of unit of measurement? Please explain what the readings mean. Where do they come from. The assumption is that the viewers know what the readings mean. I have no clue what they mean. The ohm meter shows a reading of 1. Is that good or is that bad? 1.5. is that good or is that bad?

[@joecraft4409]

Simple and effective! Way to go Dave.

[@davidsradioroom9678]

Great job! Thanks.

[@francismcclaughry3794]

Dave I got some cheap cable ends for Amazon. Is there any easy way to solder these things will out messing up the dye electric?

[@torukojinnn6331]

Dude , thanks alot , respect from Turkey🇹🇷

[@buraqmejker]

I like to use the 'beep' feature of my multimeter for checking continuity.

[@JT-py9lv]

I made something very similar... But I used an old motorcycle horn. No need to see because I can hear it. Works great if your shack is in the basement.

[@chrissewell1608]

Great idea! 🔊

[@24hourtravellers-]

THANK YOU FOR THIS VIDEO

[@donalfinn4205]

Useful enough video. I feel though that a drawing might have been simpler for those just starting out.

[@LGLDSR71]

Outstanding, thank you!

[@patriot9455]

Check the coax before you put ends on it?

[@dimitriusjulius497]

Really help! Thanks

[@TDE-76]

Brilliant 👍🏼

[@Dredlocks131]

so how do i know if the cable is leaking? and how can i measure 50ohm true it? best regards

[@bbulliard]

great job! thank you for this help.. much appreciated!

[@ProperLogicalDebate]

Can an antenna analyzer or something with an oscilloscope show how far away the short is?

[@clems6989]

Yes, most any analyzer has that function. It is simulating a TDR (Time domain reflectometer)

[@sundownsigns]

I was thinking the same thing.

[@donaldsmith3048]

Some of the antenna analyzers can test coax at RF. Some can test and tell you how far down the coax the short or open is. Coax can be damaged and check good for DC but not work for RF. I had some that got smashed, the space between the inter and the outer changed. They were almost touching, only about the thickness of heavy paper apart. That was almost a RF short.

[@gghutton]

I have these problems with antenna cables. Perhaps they were kinked along the way. But now I know a good way to test them.

[@johnstown2451]

We try to avoid touching the probes with our fingers during a continuity test. It’s possible to read continuity through your body through a parallel path

[@rxnapier]

that is indeed the wrong way and he most likely got a false reading

[@chrissewell1608]

Hey, it works for general testing. This wasn't a science lab experiment.

[@kevinkeppler7220]

Reminder: unhook the cable from the antenna. If you cannot, see whether the antenna operates at DC ground. This show in your meter as short.

[@phichi01]

@David Castler, You need a new battery in your meter.

[@skiphorni]

Not sure if I understand. If you had a short between center and outside the light would still light up.

[@chrissewell1608]

No. The spot the short occurs, would start to generate heat. Because that is where it connects + to -. Eventually burning the wire in two. And there is your bad spot! Hopefully, you don't set anything on fire, doing that test!? But, you could cut out the bad spot, and remake 2 good cables.

[@n2jve1989]

I have a question. How do you find the value of a coax whether if it is 50 or 75 ohm on a unmarked coax?? Thanks. Mike. N2JVE

[@edk6sdw600]

Brilliant!! 73/K6DW

[@paulsocia8972]

OK simplicity is best, if your fingers are touching probe, you become impedence? Just a question. I am a electrician by trade, not much electronics testing goon on in my field.

[@markbennett6818]

Like the video but I would ensure the battery is fused to prevent possibility of a short while testing 👍

[@michaelbradley8508]

Another little gem of a video - thank you. BTW, you are looking a bit better in this video - that is a good thing - you had all of us worried. Take care, all the best to you and your family. Michael VA6XMB

[@K6TJO]

Short (pun intended) and sweet to the point! Thanks!

[@MrButterpantz]

Thank you thank you thank you!

[@jamesgeorge1709]

I see the cables that shorted were soldered the rimp was fine, That is why I started crimping all me and coax cables its faster and much easier overall.

[@MakeDoAndMend1]

Plenty of fake cables on the market. Test with a magnet. Copper coated iron wires etc. George

[@user-mt2qn4yp8w]

Thank you Dave. Great stuff. 73 de KG7LOI

[@kevinkc3onohelijeepworld]

Could have used a vna or rig expert to measure the length electronically. Also could talk about how to do measurement for coax on a particularly freq. just a tip 😉 KC3ONO

[@maxxtools4524]

Wow i learn

[@glenmartin2437]

Thanks for the reminder. N0QFT

[@Barracuda48082]

Too many watts and a long key time on the shorted pieces Dave..hihi. 73, kb8qlz

[@jeanmiserany]

You measure the resistance of your body 🤦🏻‍♂️

[@ardenbowman4489]

DAVE YOUR SKIN IS PICKING UP THE RESISTANCE,YOU CAN'T TOUCH BOTH ENDS WITH YOUR FINGERS,NO SKIN

[@jeanmiserany]

Tu mesure la résistance de ton corps 🤦🏻‍♂️ You measure the resistance of your body 🤦🏻‍♂️