No gauges working on instrument panel Trac light on Trans not shifting correctly Added a good ground to TCM
Пікірлер: 13
@charlesgammons83682 жыл бұрын
I cannot thank you enough for sharing this video. It saved my family well over $700 for repairs the dealership tried to convince me that it needed. Again, thank you 🙏🏾.
@ricardovillanueva825Ай бұрын
Thank you very much will try.
@nicestrat2 жыл бұрын
I'll have to try this. Thanks for the upload!
@brandonburch9703 Жыл бұрын
This grounding did help but it was one of 3 things I had to do, for.the ones saying this didnt help possibly check your vapor canister, vent solenoid.. was causing guages to jump around weird shifting..
@QueensJack3 жыл бұрын
Nice find and thanks for the information shared.
@DaleNolan8 ай бұрын
Thank you brotherman I’m going to do my 07 HHR and see if it will fix my issues. My traction control pops off and car will shut down for a few minutes then cranks up and runs?? It’s putting a code P0016 and P0017 all sensors are new also
@ChangedUpNowWhat8 ай бұрын
Thank you! Question, can you use any wire around the house and cut the tips in order to wire it? Or does it specifically have to be a ground wire for a car?
@txwarrior666 ай бұрын
I have found over the years pretty much any wired would work I tried to use automotive wire but yes I have even seen an old extension cord used when they didn't have anything
@docholliday4388 Жыл бұрын
How about the led warning panel, won't light up.
@perryjeffery61162 жыл бұрын
I tried the ground wire but it didn't work
@davidraichel75542 жыл бұрын
Had the exact same problem but this ‘fix’ did not help at all.