How To Make A Nerf LPA Compressor Set Up || Easy Guide to Air Blasters Part 1

[@spencerwongis]

Nice, fyi for people planning to build one the pressure switch is a spring loaded switch that turns the switch on and off in a selected range of pressure. This being 90 psi it shuts it off and when it dips below a certain pressure it will turn back on. There is not a real need for my understanding of the position and negative side of things but I may have just fluked mine. Have fun. Keep nerfing.

[@aleph-not]

Do you have a link to a pressure cutoff switch? I don't know what I'm looking for.

[@nicolasreed21]

Been looking forward to this video. Everything I expected and more! You’re doing the hobby a great service, stick with the channel!

[@JamieTenikoff]

Nice one dude. Looking forward to part 2!

[@richardhuggett1021]

Nerf

[@richardhuggett1021]

Mr yo hi, how are things going with you, I am not a good time. The list is a good time. The list is a good time.

[@runesrensen8551]

werry interesting. i would like to build one some day

[@narco4714]

Finally I've been waiting

[@pricklysnerfmods7491]

You said it will work for a little while, is it going to destroy itself or something? I know hpa is a little better and worth saving for but how long will it last?

[@Nickrarri]

PricklysNerfMods if I were to guess based on how he did his connections, it was probably leaking like crazy, but that’s just speculation.

[@cobbabuilds]

No these will last ages with proper servicing.

[@pricklysnerfmods7491]

How do you carry it? I'm imagining the weight isn't too bad, but the location would be awkward

[@cobbabuilds]

PricklysNerfMods I put it in a backpack, so my shoulders can take the weight. Its not too bad

[@cobbabuilds]

No air leaks with this one

[@zaccall8882]

Ok so when you said 90psi cut off switch does that mean turns on at 90 psi and off at 120, or off at 90 and on at something else

[@zaccall8882]

nvm I read Spencer Wongs comment that helps

[@armodz938]

Hey what scope is that I would really like to purchase it

[@misterbubs9185]

will the compressor overheat

[@cobbabuilds]

gets warm, but not enough to cause failure

[@tsmcgu]

Is it worth is to use a paintball tank (as opposed to a compressor)? I was thinking about trying that, but have no idea how many shots it would give... Guess it relies on a lot of factors (volume, PSI, regulator settings...) has anyone already done the math..?

[@cobbabuilds]

Chillburn depends on the tank, a full 4500psi tank would get you a days worth of play. Tanks are just nice and stealthy really hahah

[@rmfberry261]

is there a reason for the 1/2" regulator other then the fitting you are using or would an 1/4" work just fine with its equivalent fittings?

[@alexcurmi7412]

Any input/output size regulator will work the same with the correct fittings. The one he chose probably only works with 1/2 inch

[@barrymcbruce]

Hey CObba, first thanks for the vid, super helpful. Secondly, I have a 300psi one of these laying about, is there any need for the 100/150? or is that just because you are limiting it to 90 psi, so the rest is just overkil?

[@cobbabuilds]

it could work with the right fittings. this compressor will fill your blaster faster tough but the trade-off is a lighter psi, but with yours its the opposite

[@barrymcbruce]

COBBAcrazy gotcha. It probably won't be that big a deal as I'm going to use it for a mega centurion.. Hey if you can make a longstrike good maybe there's hope for the centy. Also they take an age to reload / rechamber so probably not a huge deal. Super excited for part 2: the internals! Thanks again for showing us this, pretty dam amazing

[@boostaddict_]

Hm. This seems like it'd be great. I'm working on a Raider mod right now, when I finish it I'll probably end up with something like this but not with a LiPo. I'll have to ask my cousin about his paintball stuff next time I see him.

[@MD-iv1lc]

cobba is the thread size for cut off switch 1/8 ntp or bsp?

[@cobbabuilds]

Makeshift Marksman bsp

[@MD-iv1lc]

thanks alot. Good video!! Could u send me the link to where u bought it from because i cant seem to find it?

[@jamesjordan318]

What are the specs for the psi? By that I mean 10-40,90 to 12, what is it? Also is it Normally Open or Normally Close?

[@cobbabuilds]

Geek Gaming Studios 70psi gets you 250 most the time, depends on blaster and set up.

[@jamesjordan318]

COBBAcrazy how much fps would you get with 40 psi?

[@jamesjordan318]

COBBAcrazy Also is it a normally open or normally closed switch?

[@leonzaccagnini8255]

@@jamesjordan318 its a normally closed switch. It opens when the pressure is reached cutting power so the pump turns off.

[@drewdaly]

How long would a setup like this last if it wasn’t compressing as I was playing? Approximately how many shots could I get off?

[@cobbabuilds]

1 decent shot, 1 half decent. then you will need to charge, so 2.

[@ALPHA.Mods.1]

how much does this setup cost? and is it worth getting this, or, for a low budget hpa

[@cobbabuilds]

ALPHA yes, $60 tops

[@ALPHA.Mods.1]

Thanks

[@Nickrarri]

It’s cringe-y to see how you wrapped the Teflon tape. Wrap in such a direction that it doesn’t strip the tape off as you twist it in. Also use the full width of the tape, not just strands.

[@Nickrarri]

Remove all preexisting tape and gunk then use 3-4 wraps.

[@cobbabuilds]

No, you can see at 5:06 that the air gauge does not budge until I fire where it quickly builds pressure again 100% air seal

[@Nickrarri]

COBBAcrazy I’m not saying it doesn’t work, I’m saying it’s not proper practice with the methods you use and can lead to issues down the line.

[@btran3224]

What does LPA STAND for?

[@cobbabuilds]

B Tran light pressure air

[@markhowlett9951]

Low Pressure Air

[@btran3224]

@@markhowlett9951 4 years ago 💀💀💀

[@1969cmp]

I had better pay attention....I have no idea as of this post between HPA v LPA