discord: / discord game that you should play if you like plane crazy: www.roblox.com/games/89208512...
Пікірлер: 449
@Potato630 Жыл бұрын
this should be called how to not cobra, its literally doing what it's not supposed to do.
@Potato630 Жыл бұрын
and again, it's too vague.
@loren021 Жыл бұрын
How?
@Potato630 Жыл бұрын
@@loren021 when you cobra you use the plane as an airbrake but in the guide the plane is still moving forward while cobraing
@loren021 Жыл бұрын
@@Potato630 it's plane crazy not real life but i would be cool
@Potato630 Жыл бұрын
@@loren021 it is supposed to be a tutorial on how to, not how not to
@plaguedocx Жыл бұрын
How do I cobra a tank?
@volo_plays Жыл бұрын
Make it fly first
@Euan_Rara2 ай бұрын
💀@@volo_plays
@AgentXD-it8vzАй бұрын
Build an a-10 Is a tank
@GiygasNightmareАй бұрын
but how do i cobra a snake?
@SnasthesansАй бұрын
Make it fly first
@Fake_Slicer Жыл бұрын
you can also do it by using engine turning and a bit less ballast so the jet is lighter
@onehandgamingwithnohand Жыл бұрын
the jet needs to be heavy enough to perform a decent cobra for most Aircrafts 40 on middle, 7 for front, 60 on back
@doglovespvp127 Жыл бұрын
@@onehandgamingwithnohand oh I need about 21 back 19 middle and 28 front
@onehandgamingwithnohand Жыл бұрын
@@doglovespvp127 you need atleast 20 on a back and that's all
@sguzniko Жыл бұрын
its called thrust vectoring
@Snoooppiy3 ай бұрын
Thank you so much I’ve been trying for 2 years just to do a proper cobra On my su-30 you’ve helped me a lot ty🎉🎉❤😊
@AceSpaceAnimations2 ай бұрын
Cobra❌ Plane drifting which i was trying to figure out for years✔️
@Wandakitten Жыл бұрын
10/10 Cobra Whizfy Bro Also I Watch Your Vid's Daily Some Time's Also Ty For The Cobra Tut
@aguy27633 ай бұрын
bro stop putting capital letters on the start of each word
@krashiwaАй бұрын
dog keep quiet leave them be
@s-sd4ys3 ай бұрын
how do you make the planes flight physics like in the video? mine is super unstable and cant even go vertical, i think its because of m2m/my planes wings?
@Xenn_..5 ай бұрын
I believe the one where you pull up and spin is actually a kvouchurs bell maneuver.
@buildersandexplorers3119 Жыл бұрын
how much wing panels would you have to cover the wings with? because wing panels do slow down the aircraft alot
@lolik72427 ай бұрын
Use disconectors(heavy) or trap doors(light) instead of wing pannels to reduce drag
@madcatmk2sch24 күн бұрын
@@lolik7242 can disconnectors contribute to a good cobra?
@matiasdesvars48264 ай бұрын
hi how are things? I am somewhat new to this game and I don't have many skills, could you make a tutorial of your plane?
@brentlewis4043 ай бұрын
thx for the tut. now my Su-33 is like top gun!
@Crimson_1_PW_Mk_15 ай бұрын
the first one is called "Kvochur's Bell Maneuver". It's the maneuver that the rouge nation pilot did to evade the missile
@trangtruong30224 ай бұрын
Question: My My big *SU-57* can't peform *Kvochur Bell Maneuver* cause it too big and heavier. Do you have any idea to make it weigh lighter? Or i need Make a *Mini SU-57.*
@BloxioCoolComeonHeiscool4 ай бұрын
my jet is a su 33 and kind of the same wings as yours but when ever i try to do the cobra it does it so much and has drag even tho all of my hover engines are set to no drag is there suppost to be drag please help.
@kinghenry1790 Жыл бұрын
Good help but my main problem is the shader setting may i have help with that😅
@littlejester0251 Жыл бұрын
Nice one whiriffizy, now i can perform perfect cobras instead of almost perfect cobras and goofy kvochur bells ahh and now i can ok i P U L L U P
@pilots_VR Жыл бұрын
can you make a tutorial for a good-ish plane and how to balance it (I pretty much suk at building)
@doglovespvp127 Жыл бұрын
Question: I use a nam nam based Su-33 with m2m but customized, will it work with m2m? Every time i put some ballast at the back its very unstable (even dens 2 (2 blocks)) btw the canards work for stability. I would appreciate it if you respond thanks :)
@doglovespvp127 Жыл бұрын
and when i add too much ballast m2m gets really really glitchy and i cant cruise at mach 1 (i usually am stable at 1100 speed)
@humanperson3251 Жыл бұрын
it can, but it's just much harder, I have a plane that's a mix of Su-33 and Su-35 with mouse-controlled control surfaces and engine vectoring, it can pull pretty tight turns, just use a Russian plane or Dorito chip and put ballast + conveyors.
@doglovespvp127 Жыл бұрын
@@humanperson3251 thanks
@Whizify Жыл бұрын
sorry for the late response, do not use m2m and try spreading the ballast blocks more over the plane
@doglovespvp127 Жыл бұрын
Thanks and also I sorted it out to wsad
@fxtr0t Жыл бұрын
hey Whiz my plane can do a cobra but not the bell thingy i have tried putting more propellers to make the roll better but it didnt work do you maybe know how to?
@mayonnaise11553 ай бұрын
If it doesn't work try putting more vertical stabalizers on the back. Preferably near to ur ballasts
@HyperSoldierYT4 ай бұрын
@whizify my su35s wont cobra, i followed the tut, but it just dont wanna cobra
@MickygamesRBLX10 ай бұрын
TYSMSMMMMSMSMMMMMMMM I LOVE YOU THX I CAN FINALLY DO KVOCHUR BELLLLL
@Galashnik10 ай бұрын
How can I k-bell? its super hard even if i load the hell out of my su-30sm with propellers for yaw
@brickherde10111 ай бұрын
@ whizify i tried balancing my plane with balast but now it wont cobra what do i do?
@OctaneRating10 ай бұрын
I use a sukhoi su-30, i added 2 max weight ballast blocks at the back, added the conveyor, followed all the steps and the cobra is too short and i cannot get it to that little spin. Any fixes?
@Whizify10 ай бұрын
you should increase the speed and weight more
@aintbid_oxty7844 Жыл бұрын
what direction do you put the conveyor
@piotrekjot7784 ай бұрын
how do you do it, it seems to brake in the air and it's easier to turn how to do it
@cyclone044 Жыл бұрын
how do you add weights at the front and the back without getting unstable
@FairingXD Жыл бұрын
balance it lmao
@Ermwhatthesigma1257 Жыл бұрын
I can finally have ace combat for free now thanks whizify
@ljolivey85977 ай бұрын
I can't seem to make my own plane cobra could you make a tutorial on one of your planes that can cobra, Thank you! :)
@WingsOverAviation2 ай бұрын
Do you use toggle on conveyors?
@princedxtdevoneadorna406621 күн бұрын
what plane u using?
@bionicphantom4143 Жыл бұрын
Does it work with 2 block wide jets? the "standard" ones? I understand that they are heavier and have lot more drag, but you also have control surfaces in your jet so... I just want to know if its worth it testing
@vishruthbhandari6208 Жыл бұрын
yea
@bionicphantom4143 Жыл бұрын
@@vishruthbhandari6208 it didn't 💀
@vishruthbhandari6208 Жыл бұрын
@@bionicphantom4143 What is ur user?
@bionicphantom4143 Жыл бұрын
@@vishruthbhandari6208 At this point my question is, how do I do it with glitch mouse?
@Whizify9 ай бұрын
it does work, sorry for late response. You just need to do a lot of tuning
@vanlalruatihmar8795 Жыл бұрын
Thanks my plane kept going up, and also do i keybind the keys to A and D?
@Whizify Жыл бұрын
Roll left or right, like how you normally turn.
@Whizify Жыл бұрын
And place more ballast in the front to balance it
@FuckDuckCluckChuck Жыл бұрын
@@Whizifyisn't that going to wobble the jet?
@Steelstofzuiger Жыл бұрын
What if your computer can already scream in graphics 1 and your saab is not done at already 1.25k blocks and it already laggs too much and this doesn't work 😭
@GiraffeVR.2 ай бұрын
yo can you help me fix my su 27 the back wont attach to the plane?
@dameroglaz693311 ай бұрын
is that normal, if my plane "lagging" while i spamming?
@xavier.che12288 ай бұрын
my jet is alot bigger and i dont know why its not working any advice?
@joseherrera-wb1ec Жыл бұрын
how are the conveyors placed? like where? what direction?
@ambermercer1316 Жыл бұрын
it doesnt matter the direction and you can place the conveyors anywhere
@Keiskk Жыл бұрын
when i do it my jet glicthes it goes back wards then fowards and takes all my speed in an instant aircraft is a F 22
@aesd74677 ай бұрын
tank yu bery mach por dis bedio :D
@finleyscott7894 Жыл бұрын
It does work thanks
@Jason-ru9nz Жыл бұрын
Just imagine he gets into a high speed chase and does this
@daniellal2755 Жыл бұрын
i get it now cuz the mass needs like time to load of whatever and land it works
@rush70195 ай бұрын
is a sukhoi su-33 or su-27 allowed for this guide? If so, I will build one.
@Whizify5 ай бұрын
Yeah
@rush70195 ай бұрын
uploaded a cobra video lol
@morralindgren5353 Жыл бұрын
How much speed i use mouse button 1 and auto cliker
@ExtraVirgin0liveOil Жыл бұрын
So, for the conveyers, are you saying a conveyer drive, or just conveyers on their own?
@CrumbledCabbage Жыл бұрын
Conveyors on their own and you pull up and spam the keybind
@CrumbledCabbage Жыл бұрын
I use r and u need to put the speed to 60
@RSG85 Жыл бұрын
thanks
@HyperSoldierYT4 ай бұрын
my su35 wont cobra, i did what u said but it wont please help
@KDLR24 ай бұрын
Would an su33 work for this?
@Low-Level-Fish7 ай бұрын
as a swedish person i can comfirm our jets looks like doritos
@mistakox Жыл бұрын
can i use jets like SU-27 for that? (also how do you make the jet go forward in kvochurs bell?)
@Whizify Жыл бұрын
Watch the video bruh
@Potato630 Жыл бұрын
@@Whizify you show not one thing on how to xd
@Whizify Жыл бұрын
@@Potato630 dumbass it's literally adding conveyors and ballast lmao
@mistakox Жыл бұрын
@@Whizify worked and i can do kvochur's bell at 1k speed 🥶
@AxoTheAxo Жыл бұрын
@@mistakox 🥶
@JaxPlays251 Жыл бұрын
hellr whiz its the guy with the titanic in the hof thigny lol
@filipbonski5079 Жыл бұрын
Do u need 1 or 2 conveyors and foward or backwards direction when u spam
@Whizify Жыл бұрын
nothing matters, just attach it to the jet and it should work
@Toypra6 ай бұрын
i cant get past the first stage, my jet just start going to the right or spinning around
@ceuwwwz6414 Жыл бұрын
So,my jet (SU-57) when it goes to do the cobra it literally gets upside down instead of going forward,how can I solve?
@Whizify Жыл бұрын
More ballast blocks
@ceuwwwz6414 Жыл бұрын
@@Whizify in the back,middle or in the front?
@Andi_khasyaf24 күн бұрын
how to do K-bell Manuver? i don't know How to roll It to right or left
@Inhale_86324 ай бұрын
me when the guy flexes his "cobra" by doing a kvochur's bell
@asadadasdfasffafasdfsa Жыл бұрын
how i can make a clean cobra and how i make a sukhoi nose?
@Antylics10 ай бұрын
what are the shaders you used? and what are the settings bro please 😭😭😭😭
@Whizify10 ай бұрын
Shaders are dead since anticheat, the plane is just a very heavy plane.
@Antylics10 ай бұрын
@@Whizify oh by settings i meant the shader settings, and i could prolly get them to work, what is the shaders name?
@Whizify10 ай бұрын
@@Antylics the shaders are custom made shaders. You use them by pasting a script into a script injector
@MicroFish010 ай бұрын
how many conveyors do i need?
@MartDaMarMot Жыл бұрын
Nice plane
@buildersandexplorers3119 Жыл бұрын
How would you stop yourself from just falling
@randomz8804 Жыл бұрын
do u spam the conveyor or hold the button
@Whizify Жыл бұрын
Spam
@M4ssExtinction9 ай бұрын
How do you pull up so fast? is it custom control surfaces?
@Whizify9 ай бұрын
a lot of default control surfaces clipped
@spanky5877 Жыл бұрын
Nice
@cracctimmi6 ай бұрын
when i do it it just gains altitude and dosent do it for long
@catboxhampter9459 Жыл бұрын
tutorial on the graphics off ur plane crazy they look so good
@Whizify Жыл бұрын
I have made a video on them
@Cresette0 Жыл бұрын
What if too much weight to take off and can you do it with mouse control?
@Whizify Жыл бұрын
It is possible for glitched mouse control. And make it lighter if it refused to take off
@Cresette0 Жыл бұрын
@@Whizify thx
@BOT_999shinigami Жыл бұрын
Hey whiz can this work on ADFX-01/02 or X-02 wyvern?
@Whizify Жыл бұрын
just dont make the wings fold because they will cause instability
@BOT_999shinigami Жыл бұрын
@@Whizify oo ok I'll try doing it
@AFG.17 ай бұрын
Yes
@NolanMcWilliams11 ай бұрын
Wait what jet is this exactly?
@illbecomethemonsterodysseusfan11 ай бұрын
my first attempt on making cobra is good but my second attempt making cobra /w sukhoi su-33 is hard asf
@andrewtate55635 ай бұрын
Can you do it with a Su 57 ?
@_.hondziarz._2203 Жыл бұрын
i adding helium + balast + motorlock its best with no conveyors
@airderNI Жыл бұрын
i cool
@belkan_chad Жыл бұрын
Made an su-30MKI with this trick bro thanks
@TheOtherAviationGuy Жыл бұрын
0:09 thats actually a kvochur bell, but sure
@GiraffeVR.2 ай бұрын
can you do tutorial of your plane pls
@sharkyimaginegaming6163 Жыл бұрын
Where do you place the conveyor
@zombielittle Жыл бұрын
anywhere u want
@silumantitanoboa82632 ай бұрын
I NEED THE PLANE TUTORIAL!! if u make it i will subscribe to you
@C0w4B0y2 ай бұрын
can you make a tutorial on how to build the plane
@Whizify2 ай бұрын
no
@CrumbledCabbage Жыл бұрын
My cobra works but it just bleeds out loads of speed then I stall out
@CrumbledCabbage Жыл бұрын
I fixed the problem All I needed to do was make the conveyor speed 60
@Hi-Capa_Gold_Watch2 ай бұрын
Bro remember dhdhnvchj? That was me
@Unrelated_Content04 ай бұрын
The first two "Cobras" weren’t cobras, they were the K-bell maneuver
@buildersandexplorers3119 Жыл бұрын
When you pull up how do you not just go up
@luxqk11 ай бұрын
how do you get those graphics like damn
@realthemonke45744 ай бұрын
PC, max graphics, ingame shaders (shift+z+enter+m/n), and maybe bloxstrap i can't tell.
@PotyanPro Жыл бұрын
where do I need to place the conveyor and which way
@CrumbledCabbage Жыл бұрын
You just need one somewhere and you spam the button while you pull up. You also need the speed of conveyor to be 60.
@mrshadowfox43043 ай бұрын
I need a tutorial jet like that to have it cobra ;-;
@Ifeeil Жыл бұрын
hello @Whizify , what is the name of the plane in this video?
@Whizify Жыл бұрын
Su 30
@Ifeeil Жыл бұрын
@@Whizify oh thank you very much
@J4yT3a Жыл бұрын
Making the materials metal will make it heavier, correct?
@Whizify Жыл бұрын
sorry for the late response, i'd suggest not to because it makes the paint look way worse since only a specific amount of blocks support materials.
@realthemonke45744 ай бұрын
I only use metal for making some things look a little more realistic, usually in buildings.
@0Tired_Gaming07 ай бұрын
How is your plane not wobbling because when I tried it kept wobbling
@realthemonke45744 ай бұрын
Try balancing the ballast blocks a bit more, also the wobbling is probably just from m2m trying to correct itself while at high speeds (m2m isn't always suggested with doing cool tricks, it can be done fairly easily but it doesn't take as much time to just start trying to use wasd)