Cocco Pro BLDC Clipper and Trimmer Unboxing and Review

[@Seancutshair]

Guys I apologize for the sound in the first clip! Had the mic up by the camera and it sounds terrible!!! Learned my lesson and will be better moving forward!!!

[@andresmaldonado4185]

literally what i was thinking ! 😂

[@andresmaldonado4185]

How does those trimmers compare to the Sabers ??

[@desmondmitchell5602]

Lol no problem

[@davidf.3916]

Was about to comment this same thing, still watching. Glad you picked up on that.

[@Seancutshair]

@@davidf.3916 sometimes it’s fixable but this time it wasn’t. Will definitely be wearing the mic moving forward

[@mariocutz]

Your channel has come so far! Reviews are great my 2 cents would be to have the mic closer and not sound so distant. Weight comparison on a scale would be another detail that no one else does. Have a mic that compares decibels. Ive bought 4 different brands and would be cool to be able to compare decibel without buying each one. I'm just a fan appreciating the changes of your channel.

[@Seancutshair]

Yeah this is the last video I had the mic up by the camera! It’s awful! Now it’s down on my chest 👌🏻👌🏻👌🏻

[@stevengarcia9367]

It's common when working in a shop for different barbers to use other brands to stand out in a good way ! People observe and if they see a barber kutt good with diff clips they'll give them a shot . Me , I'm wahl till I fall , or I'm babyliss so I can't miss ! 💯

[@Seancutshair]

👌🏻👌🏻👌🏻

[@RobertElChuntaro]

Switch to stylecraft and be a master of your craft . Saber and instinct trimmers beat any fx skeletons. Instinct and rebel/boosted clipper is a beast I grab those more than my boost fx clipper 🫡💯

[@Seancutshair]

@@RobertElChuntaro my main set up has been boosted saber for a long time

[@RobertElChuntaro]

@@Seancutshair i have a boosted , rebel , instinct and x ergo that i always switch from and i have every sc trimmer the sabers, instincts , flex , rebel , and even an evo trimmer lol 😂 and i use rebel shaver or fx3 shaver

[@the_original_Versastyles]

Yep. That's because you have done. Therefore you know. Wahl and babyliss is the best way to go. And Tpob has some amazing goodies for amazing deals :)😊

[@somali-korsani]

I'm asking for Cocco Hyper Veloce Pro Clipper: You've tried the machine, you know. Are the cutting ranges set to 0.1 - 0.2 - 0.3 - 0.4 - 0.5 - 0.6 mm without a comb?

[@Seancutshair]

No clue honestly I don’t get caught up in all that I just see how they cut, and cut accordingly

[@somali-korsani]

@@Seancutshair OK, thank you very much!

[@juanblendz8460]

Was just thinking about getting these glad you made a review

[@Seancutshair]

👌🏻👌🏻👌🏻

[@MartyBlendz]

Love the shirt my brotha 🙏🏻

[@Seancutshair]

You know it 👌🏻

[@calmlypanicking1460]

😂Literally midnight in South Africa BTW..... Let's get it🔥

[@Seancutshair]

🙌🏻🙌🏻🙌🏻

[@hynotik]

I hope your trimmer stays working. Bought mine at CT Barber expo and tried to use it when I got home. It turned on once and never again. Got one response from the company and been ghosted since then.

[@JLCUTSMEUP]

TPOB did me like that too. And what's crazy is, I wanted to just tell him how much I liked them but would add a rubber grip( maybe, on the slime two)

[@JLCUTSMEUP]

Love the downward look now Sean. Dope bro. Keep inspiring me and others please. Appreciate you and your help and time!

[@Seancutshair]

Damn that’s rough hopefully they get back to you at some point

[@THEPISSEDOFFBARBER]

@@JLCUTSMEUPTPOB did what? Please elaborate do you mean your slime 2 worked for one day? If so give me your ticket number and order number and I’ll have a new one sent. If its amazon free returns are handled by them 🙏🏻

[@smoovmonty5535]

@@THEPISSEDOFFBARBERGOAT

[@ronbrown9762]

Hung my clippers on the hook for 43 years. Lol. Love my power matt😎

[@Seancutshair]

Love it 🙌🏻

[@lucasflater2]

You got the old models for both of them… If you wanna compare to latest clippers get Cocco hyper veloce clipper n trimmer

[@Seancutshair]

I wasn’t trying to get the new ones, was wanting to see their original set up

[@emilianolopez1812]

I see you’re videos all the way down here in Mexico bro helped me pick my shaver 😂

[@Seancutshair]

Love it!

[@oled360]

does the blade fit a regular babyliss skeleton fx?

[@THEPISSEDOFFBARBER]

I hope someone makes this trimmer in slime green with a goldfx depth blade and a faster motor 😀

[@Seancutshair]

😳😳😳

[@davidtrejophysique5386]

I dare you 🔥🔥

[@THEPISSEDOFFBARBER]

@@davidtrejophysique5386🍿

[@eerc0]

​@@THEPISSEDOFFBARBERYou should make a slime version of the madeshow m10. Call it the slime 3

[@THEPISSEDOFFBARBER]

Madeshow m10 is the JRL ff2020 you know right?

[@4cjayy]

I got the clippers in gold, not bad but they came with regular guards not premium

[@Seancutshair]

Dang

[@simonramsey1241]

Hi mate is this the graphene blade or the normal blade £100 just for the blade then £200 for the trimmer in uk lol is it worth it wen I have. Sabers boost fx lo pro and trolls 🤣🙈

[@Seancutshair]

It’s the graphene blade and yeah that’s a lot. Like I said these weren’t for me and a show bundle. Don’t know if I would pick them up for all that

[@24kcuts]

I watched a live awhile ago and he said its digital gap because the distance between still blade and moving blade is the size of a pixel or someshit

[@Seancutshair]

Interesting 🧐

[@djdoyler]

You should have used the guards that came with the clipper I use the same guards on my xergo and they're brilliant!!!

[@Seancutshair]

I’ll have to check them out

[@djdoyler]

@@Seancutshair I personally think they are the best premium guards to use. Please do a review on them id like to see what you think, hopefully you like them as much as I do

[@Mike-hy8cs]

​@@Seancutshairthe guards are really good i skip guards with them. The 1 guard blends into the 2 easy and the .5 blends into the 1.5. It cuts slightly longer than a traditional .5 but you can blend it out with the corners pretty easily.

[@chunt241]

@sean do you think the coco trimmer blade is worth the buy an sean let us know about the tpob psycho blade if you get them

[@Seancutshair]

Psycho is sick! The coco hits super hard too but you know I rock with TPOB

[@chunt241]

@@Seancutshair so what blade is worth getting you think the coco trimmer or the psycho

[@Seancutshair]

@@chunt241 it depends on what trimmer you’re using. I’m probably going with the psycho

[@robrealcuts]

Also I’m heavy handed but it forces me to be light csuse they cut so effortlessly

[@Seancutshair]

💯💯💯

[@nicoaduos1923]

I saw the website and replacement blade with shipping and taxes almost 80 dollars! Definitely not a good deal ! Considering that I change my blades every 2 Months

[@Seancutshair]

Geez!

[@robrealcuts]

I’ve cut people with my sabers and gold fx. So you gotta be careful with any gapped trimmers in general.

[@Seancutshair]

For sure 👌🏻

[@the_original_Versastyles]

You see my video on (digital gap) neodymium magnetic setting gapping?

[@Seancutshair]

I didn’t

[@coreymatthews7144]

Was it supposed to be a parody video

[@lsbellamy7631]

My barber uses the trimmer on me, it never fails 🇬🇧💯

[@Seancutshair]

Yeah it’s a beast

[@trey3843]

Do the clipper opens up to a full 1 or a half

[@Seancutshair]

Idk I don’t get caught up on all that

[@trey3843]

@@Seancutshair Thanks for the quick response appreciate it. I cut with the Andis Cordless master and Cordless Fast Feed they both open up to a full 1 was thinking about getting the Clipper nice review btw

[@davidtrejophysique5386]

You should get the Kemei’s knock off of this🔥

[@Seancutshair]

I got something 👌🏻👌🏻👌🏻

[@davidtrejophysique5386]

@@Seancutshair cannot wait!!!

[@eerc0]

​@@Seancutshairkemei has a machine that looks like this but it doesn't use the same motor. Cocco is using a brushless motor.

[@andrejo8]

I think its the Same clipper

[@robrealcuts]

I just added the graphene blade to my coccos n those smack 😤

[@Seancutshair]

Yeah it’s crazy

[@donovanmoarvalencia616]

Saber trimmer or cocco trimmer?

[@Seancutshair]

Saber

[@donovanmoarvalencia616]

@@Seancutshair thanks bro 🙏🙏🙏

[@kevanmalin9711]

Why saber?? Just wondering I thought that graphene blade hit hard? Is saber just better all around? I have saber it’s my favorite but was trying to maybe get these cocco’s don’t want to waste my $$

[@ldorado5787]

What up Sean. I'm dat OG. I still use all wired clippers/trimmers. I was one of the first to explore the cordless designs. Ran with the NiCad Andis ACBG's for a while. Love the "freedom" for styling afros. But the battery was garbage. I had to replace them constantly. But, other than the occasional cord replacement (mostly from hanging them), I don't see any real advantage to using cordless. The corded are way stronger. The cordless do look flyer, though. So if you need a gimmick to get clientele, than you better go cordless. The kids love them!😆 ...as for Cocco clippers. I suspected they were hype before your reveal. Just from the wording used in the description. Nothing truly innovative. So, don't believe the hype!

[@Seancutshair]

Yeah they’re good no doubt but idk if it’s any different than “zero gapped”

[@demarcocarterii5560]

I love these! I’ve been using them as my main clipper and trimmer set while in barber college.

[@Seancutshair]

Nice 👌🏻👌🏻👌🏻

[@javierjaime9386]

I cant keep up with all the new clippers coming out 😢😅

[@Seancutshair]

Always something new coming out 💯

[@nate9193]

might have to add these to my rotation 🔥

[@Seancutshair]

They’re solid for sure

[@nelsgaltv5961]

Ganda ng clipper mo kapatid gusto ko yan.

[@Seancutshair]

Thanks!

[@massterrbarber]

Amazing unboxing

[@Seancutshair]

🙏🏼🙏🏼🙏🏼

[@camillebentinck1372]

Yes love the unboxing table 🙌🏼

[@llai8501]

Great video, just need a mic. Sound is very hollow.

[@Seancutshair]

I have a mic just had it placed by the camera not on my shirt 🤦🏻‍♂️ couldn’t make it any better. Now I know for the future

[@LFactoRve]

wonder from where the name is :) maybe from scrapycoco ! and his saloon 😂

[@Seancutshair]

What?!? 🙃

[@LFactoRve]

@@Seancutshairref, adan Sandler movie.. 😄

[@darakdallardo3672]

Honestly been seeing theses in canada now, asking a ridiculous amount of money for clippers that just appeared on the canadian market, lower battery life than its competitors, and low RPM compared to their competitors, also using their own tacky tech like digital gap which i think sounds tacky… gamma and Stylecraft brought amazing clippers to the market id say some are cheaply made ive had to repair 2 gammas, JRL so far has been good all way around, trimmers and clippers are definitely not all in the same competition, id say stylecraft saber and skeleton with the psycho blade from tpob hit like crazy and gamma BOOSTED clipper and rebel and JRL clippers 🙏🏻

[@Seancutshair]

👌🏻👌🏻👌🏻

[@craigsmith9366]

Shiiiiiit my Fast Feeds are hanging as I type😂

[@Seancutshair]

😂😂😂

[@twinhello446]

Man that's a good deal for $200.00....

[@Seancutshair]

Yeah was definitely solid and they threw in the graphene blade

[@Xtraxc]

Go get the kemei trimmer and clipper set its the same thing for $60... $200 hell naw you over paid

[@hawghawg381]

I need it with a cord.

[@Seancutshair]

What’s a cord?

[@JULESG8]

Digital 🧢

[@Seancutshair]

👀👀👀

[@robrealcuts]

Yeah the digital gapped is gapping with a computer, magnets and microscope

[@Seancutshair]

Got it

[@robrealcuts]

@@Seancutshair I mean it’s a pretty innovative way to gap your tools. But they should just sell the kit/technology if they wanted to please the barber industry

[@robrealcuts]

@@Seancutshair they got fade blades now that they gap n it blends seamlessly into the trimmer

[@504fadez]

Tpob X is the updated way better version of this 2

[@Seancutshair]

👍🏻👍🏻👍🏻

[@Xtraxc]

This is nothing but the kemei clipper set... $60 for full set

[@Seancutshair]

Wow amazing

[@erikbarragan2422]

Chinese clippers with a Logo on it 🤦🏻‍♂️

[@Seancutshair]

Aren’t they all?!

[@Sparklingdose]

it's make too much noise 😒 🙄 😤