COD MWIII | All Season 4 AfterMarket Parts Showcase!

Thanks For Watching! :D

[@pr1me437]

Should i stop using the black solid camo on AMP's showcases? 🤔

[@JG-mv7fl]

Na

[@the_true_pepol]

No

[@darkov5515]

No

[@myballsarehurt-vb5ln]

Nope you're good

[@mr-iceguy]

Na

[@1rz2rz3rz]

Another season, another cursed gun party! At this point I like them because it's so foolish, hilarious, and ridiculous as much.

[@skelter2]

Duuude, that AMPed Basilisk RPM is ridiculous lmao, I loved the revolver in MWII and hopefully this’ll give the Basilisk the kick it needs to be usable in MWIII!

[@darkov5515]

Pov: they added the Og snakes 💀

[@Ansioso53]

It's good and fun to use, like every conversion kit should be

[@Nick-sq5xe]

Luckily you can’t change the ammunition on the kit so no rapid fire snake shots

[@literallyagalilacegenii7.690]

It’s basically the M1 Irons from AW

[@Boaris_Johnson]

The basilisks have been usable in MWIII before the aftermarket part, just aim high, if you just can't aim high with it, I see where you are coming, I've used both the TYR and Basilisks and go on some streaks with them, it's called The Boaris Sheriff class setup

[@michel4rthur]

The Barrett 50 cal at home:

[@Osca3007]

More like the kv broadside amp at home

[@SlavaZomba]

You know there's other .50 calibers right?

[@Direbit]

@@SlavaZomba you do not know what a joke is even though you are one 💀🙏

[@SlavaZomba]

@@Direbit A joke is supposed to be funny, or atleast make sense💀

[@Direbit]

@@SlavaZomba true true

[@imtoolazyforaprofilepic4961]

Black skins on Aftermarket Parts is just so... *(Chef kiss)*

[@Kilo_141x]

The Gunslinger conversion kit makes no sense to me.... There is no revolver with an instantaneous trigger action as the hammer of a revolver always needs to be moved to strike the primer and its not instant

[@Nick-sq5xe]

Well if you look the hammer doesn’t even move so it’s not even used when firing so there’s that

[@Makarov3792]

You can get revolver to that firerate, you should check out world records of Jerry Miculek.

[@jayday187]

Functionally it's the same as the Bloodhound from BO3

[@Villa_Triff]

it might have a smaller internal hammer on the inside with the conversion.

[@Vampire_EGirl]

The kit for the MP5SD is honestly probably the most realistic one here, since only the lower part is 3D printed The same can’t be said the M16 full auto kit, in which almost everything is 3D printed, meaning it would melt very quickly

[@D-R.Gaming]

I only need 6 round cylinder attachment for tyr to make it similar with ocelot's revolver in MGSV The Phantom Pain, don't care if they make it as AMP(but cylinder changes only not major gun model changes) or new attachment. Might be better instead of long barrel AMP for tyr

[@danyaliqbal1429]

"I'm already an AMP, Kaz"

[@sourlemon3337]

The RSh-12 (Tyr IRL) has another version called the RSh-9 chambered in 9x39mm (same calibre as AS Val) which holds 6 rounds in the cylinder instead of 5

[@projectrazor8963]

- JAK HARBINGER - This converts the M4 or hell any AR-15 in that matter of firing the .50 Beowulf round. The only thing that bothers me is they decide to just make the whole rifle 3D printed while this could’ve been a ammo conversion. - JAK REQUIEM - This is only available for the Kastov 762/545, making these 2 into the AK-109 and AK-107 which are counter balance systems that eliminate recoil. - JAK SCIMITAR - Not impossible as it can be done with a regular MP9. - JAK DECIMATOR - You can make this with the regular Lachman SUB but hey this is a video game so I’m not gonna bother. - JAK VOLKH - Black Ops 4 Auger electric boogaloo. - JAK INTIMIDATOR - This could’ve been a trigger attachment for the Renetti. - JAK Gunslinger- No comment as this is not possible let alone for a .500 Magnum. - JAK THUMPER-656 - I wish this could’ve also have shotgun rounds.

[@doctorend4339]

For the gunslinger it may be possible simply because it’s not 500

[@doctorend4339]

Actually wait I’m Stupid, this would’ve been possible if our operator would actually fan the hammer when hip firing

[@odie2495]

To be fair, at least you load 8 rounds for the JAK Gunslinger unlike how in Cold War the Magnum was somehow able to fire 12 shots with only 6 bullets.

[@akiyomer]

on the M4 you need to change the whole barrel system and make the ejection port larger if im not wrong

[@totallytherealbasil]

The Gunslinger turns the gun to 357. Magnum.

[@RayleeRaven567]

teasing 3D printed gun at the end of MWII felt like the calm before the storm to me. none of these are what i can think of even in the wildest dreams

[@SlavaZomba]

They're not even that bad

[@jeorge8551]

Funfact the m4 amp is actually chambered in 450 huntsman and not 50 cal which is the same as the sidewiener

[@kinnexion]

Why the fuck would you raise the sight over bore on the AK platform anymore than it already is??? With this new kit, it has now raised the SoB by about another inch. That’s ridiculous. These devs aren’t even thinking about what would actually make sense, anymore 🤦🏼‍♂️

[@userenfusjwje38]

What did the authors smoke?

[@BornaPlayz0]

Tattoo ink

[@donaldcalhoun3665]

Probably every drug known to man

[@FevrDrim]

Advancement made - how did we get here?

[@MICHAELplayz2012]

The renetti looks like the beretta

[@oolooo]

They could not give us the actual MW2019 M581 but they gave us that Basilisk nonsense .And still no Single Action Revolver .

[@ola_ola._.]

i strongly recommend that you stop looking to the sky while showcasing, i think you have noticed that when you look up, the gun goes down by a bit and cant be seen properly

[@pr1me437]

@@ola_ola._. i do this for performance reasons :)

[@SIGP220Elite]

the harbinget should have been for the ftac recon

[@PoloGeeb]

i want the Gunslinger AMP for the Basilisk bc i already main that secondary instead of a knife but the .500 is so strong

[@tzukiioo]

I feel like there was 0 need for the Lach Shroud/Decimator kit to ever exist

[@Etheriumn]

Whats that camo on the JAK Intimidator KIT? It isn't gold is it?

[@pr1me437]

@@Etheriumn it's the solid clay camo, i put it on to make the gun look like the Beretta M9A4 :)

[@slender6398]

dude why does your game look so good mine looks horrible

[@pr1me437]

@@slender6398 i edit it on the vídeo editor to make it more colorfull and alive :)

[@Noxis07]

I'm not against unconventional conversion kits for guns, but Christs sake the 3D printed look is atrocious. Why couldn't they have just used a carbon fiber texture? I mean they did it for some kits, so why not do it for the rest. It'd look better and make more sense since Carbon fiber is pretty durable.