CODE FREE! Home Automation Project with TONs of features | KME Smart IOT Platform

[@SKElectronics]

Last video of your on this convince me to switch from blynk to Kme but then I didn't do it, last night I was looking for more details on it today morning saw this video (great timing) and now it's up and running.❤

[@techiesms]

Glad I could help

[@IamSuraj-rj8tm]

You should use opto-coupler along with transistor.

[@sreekanth369]

Awasome Project, Good Luck and keep it up

[@techiesms]

Thanks!!

[@NEXT.BUILDER]

Such a great as always 🎉

[@techiesms]

Thanks 👍

[@gtaplayzz]

@@techiesms can i control with google home mini?

[@VioletSu]

Very cool and informative video!👍 Thank you for sharing!💟 Would you consider a video showing a demo of how to add SenseCAP Watcher to KME, adding AI to the home automation scenarios😉

[@techiesms]

Great suggestion! But how would watcher help me with home automation? Like what’s the exact idea in your mind. Can you share ?

[@AsadAli-mz1ou]

Great Sir, very nice I have been done already it is very easy and free Sir can we connect A external led with Esp32 any pin for to see whenever Esp32 connects to the internet Like in Arduino coding I mean to say that in case of power failure any time in a day as Esp32 turn ON it should turn on A external Led and secondly I noticed in KME Smart the IR reception is poor than Arduino coding...A Bundle of Thanks from Pakistan. IMRAN

[@AsadAli-mz1ou]

Is it possible to send me some PCB,s in Pakistan?

[@karthikkeyan7231]

Can I use multiple ESP32 boards with KME? For example, I have a duplex home with two bedrooms, and I plan to use four ESP32 boards. Will KME support multiple boards? I understand support is available, but is it provided for free? Also, please clarify how many boards can be used under the free tier. I ordered few items from your site the packing and shipping support was extremely good. Thanks!

[@Eng-Nabeel2004]

Yes, you can use multiple ESP32 boards with KME. KME is designed to support multiple devices and can handle up to 100 devices in a single network. This means you can use four ESP32 boards in your duplex home without any issues.

[@virsavp]

I have a doubt. What is thus U3 component

[@rlrentertainmentsinventions]

Nice project bro, I will try to make it 👍

[@techiesms]

Great 👍 Happy Making.....

[@rlrentertainmentsinventions]

@@techiesms Thank you bro

[@pravinabaldha7240]

I have interesting idea and I am currently working on that I want to make tutorial of that like how to mke fully independent ai pocket device compact in size and has voice assistants and object recognization and has display on it and showing captions on that portable and use with sim card maybe thats great idea for your channel can you please make that ❤

[@harshavenkatasai451]

Guys, i tried the project i am getting a flash high of all realys for a sec when power loss and coming back. Help on this to make the relay low all the time until the switch is pushed/input

[@muzaffarbashir4566]

If I run the project on 12 volt dc light turn on by self after diagnosis when i removed the wires of push button then working very good and remote function also not works properly plz guide

[@techiesms]

What issue you are facing?

[@muzaffarbashir4566]

@@techiesms actually i have connected this at 12 volt dc supply using battry if i conect push switch wires to the board and when power supply 220 get switched on for battry charging then lights or relays get trigger on and off by self when push switch wires removed its working fine other issue is with remote no working smooth sometimes woks some times not

[@massimomalesci352]

Really amazing video! What about I2C ? If I needed to add an I2C sensor as BME for example, what should I do?

[@techiesms]

for that you need to use KME Serial library watch out this video to learn more about it - kzbin.info/www/bejne/sH6lqKiZgaZssNk

[@syedmutahir1917]

sir your video are great one question can we use it from any were are we can use it with in wifi range

[@techiesms]

Within wifi range

[@mehul1764]

How can we control a 2.4ghs rf device through alexa and Google home

[@ArunKumar-vn2cc]

How can i use more then 5 switches or point ?

[@govardhanmuddapati8834]

it is good video your explanation so good but its small doubt how many number of devices adding at a time like 10 or 15 and it will be free are purchased

[@techiesms]

Yes of course , its free and not limited to any number of devices as of now

[@OnlyVocals-Nomusic]

Can we contol stepper and servo motors?

[@techiesms]

For that you need to use KME Serial library watch out this video to learn - kzbin.info/www/bejne/sH6lqKiZgaZssNk

[@OnlyVocals-Nomusic]

@@techiesms i have already watched that❤️ but I was expecting to send custom data through serial

[@techiesms]

@OnlyVocals-Nomusic no you can only send hex values

[@aditya_patil]

Great video 🎉🎉 just had one problem... Will it work even when I am using shift registers to extend gpio pins?... If yes, how ..

[@techiesms]

Yes it will but you need to connect external microcontroller with this via Serial communication I'll try to make a dedicated video about that as well in future

[@anbur1790]

Bro i am try to create a your chatgpt v2 - i am facing text to speech part library error Can you help me to solve this problem

[@firdoshdiakus4841]

Great project but I prefer Cadio...as i prefer to use RF remote in stead of IR remote.

[@techiesms]

Fair enough! I'll also forward this suggestion to KME Team If they can add this feature as well

[@firdoshdiakus4841]

@@techiesms That will be awesome. You a star...

[@smartteg7381]

​@@techiesmsthey have added the RF Sir

[@marufulalomkhan5177]

Sir, fan speed up & down using remote & voice. Is it possible?

[@techiesms]

Using Remote possible not with Voice Assistant

[@khris1977]

Good day what is code for ESP32 before i can connected to KME Smart IOT mobile apps? from Time: 7:41/2401

[@techiesms]

Watch the process of flashing the firmware in the video from 02:22

[@supreethk8075]

Sir can you make a video on smart and automatic irrigation system using KME software please

[@shankerjeetsingh5654]

Nice video.. how to use serial port for connecting external microcontroller say uno ?

[@techiesms]

Already made video about it just search for KME Serial on KZbin and you'll find our video

[@chinmaykumardash8885]

Brother please make this project for 4 room and 1 kitchen also washroom.

[@YogeshPuriLevitation]

what type of relays you are using?

[@techiesms]

Normal 5V sugar cube relay

[@isov4345]

awesome..

[@surajit3052]

Launch a type c based node mcu esp8266 under 200 rupees on your website

[@VettivelSivakumari]

Making a youtube music player with KZbin music api

[@vasu_sirohi2211]

Provide me gerber file of cadio based home automation system v3❤

[@TechAddax]

Please Share pcb garbar file🌐

[@bgmanu1]

Make some project using Arduino UNO R4

[@techiesms]

Sure

[@syamkk7299]

👍👍

[@AsadAli-mz1ou]

Sir can you send me some PCB's in Pakistan?I will pay PCB's & shipping Charges.. Please inform me if it is possible..Thanks

[@IamSuraj-rj8tm]

Rather than take the Gerber file and order it from jlcpcb.

[@firdoshdiakus4841]

​@@IamSuraj-rj8tm He does not provide Gerber files.

[@shamimchowdhury8038]

please pcb garbar file