CodeBlocks for beginners. Running C/C++ programs in CodeBlocks in the easiest way possible in 2021!

Welcome to Everything Computerized, I'm CA and in this video I'm going to demonstrate the use of Code::Blocks. You'll learn to create a project in Code::Blocks, select language for the project (C/C++), build and run the project.
I'll also show you a keyboard shortcut to build and run a program, so watch the video till end.
Links for this video
► Install Code::Blocks :- • Install latest version...
Other Useful Links
► Visit my Blog:- bit.ly/3eax04I​
► Windows 10:- bit.ly/3stSb79​
► Follow me on Instagram:- bit.ly/3tww01f​
Warning!!!!
► Don't Click!!! - bit.ly/3an6a8n​
Timestamps:
00:00-00:32 | Introduction
00:33-01:04 | Open Code::Blocks
01:05-03:00 | Create a Project
03:01-03:41 | Edit the Source Code
03:42-04:37 | Build & Run the Code
04:38-05:28 | Re-build & Re-run Code
05:29-06:27 | Create another Project
06:28-07:08 | Edit the new Source Code
07:09-07:26 | Build & Run new Code
07:27-08:17 | Important note on Build & Run!
08:18-08:32 | Note on Saving the Project
08:33-09:27 | Open an Existing Project
09:28-10:00 | Shortcut for Build & Run!!
10:01-10:36 | Conclusion
─────────────────────────────────────────
Music in this video:-
○ Believe by Roa / roa_music1031
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/roa-believe
Music promoted by Audio Library • Believe - Roa (No Copy...
○ Campfire by extenz / extenz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/extenz-campfire
Music promoted by Audio Library • Campfire - extenz (No ...
○ New Start by LiQWYD / liqwyd
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/new-start-liqwyd
Music promoted by Audio Library • New Start - LiQWYD (No...
○ Path of the Fireflies - AERØHEAD / aerohead
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/3fPdsFf
Music promoted by Audio Library • Path of the Fireflies ...
○ Path of the Fireflies - AERØHEAD / aerohead
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/3fPdsFf
Music promoted by Audio Library • Path of the Fireflies ...
─────────────────────────────────────────
Thanks for Watching!!
#codeblocks #howto #programming

[@tech.curiosity]

Quick, clear and well organized. that's how topics should always be. Well done.

[@EverythingComputerized]

🙌

[@EdlawitSolomon]

Short and clear description 👌

[@gargichauhan4307]

Thank You soo much, very helpful, crystal clear steps with nice zooming in to show the icons

[@EverythingComputerized]

You're welcome!😇

[@AX3904P]

Your an absolute legend, many thanks dude.

[@EverythingComputerized]

😇

[@imran27.04]

I were finding these type of video. But I got it at now

[@ajuiceonline]

Bhai yaar tum boht acha smjaate ho❤️ yt me boht video dekh lia lekin kisi ka smj nhi aya ... Apka video dekha pehla PROGRAM bina kisi Error ke run hua thank you so much brother ❤️ pardon of love to you

[@EverythingComputerized]

Thank you for the appreciation bro!❤

[@sajjadrizvi613]

@@EverythingComputerized bhai english weak hai hindi mai bhi bol lo

[@mlatiframzan8044]

Thank you so much. You really gave me very useful information and I can really understand every point easily 😊😊😊😊😊😊😊

[@EverythingComputerized]

Glad it was helpful!

[@petermulemwa5337]

Great work thank you for the video

[@tabithamwansa5717]

Wow dude you explain this so well,thank you 🥺🥰

[@EverythingComputerized]

Happy to help 🙂

[@Imaammuhsinkakande]

Thanks man coz I faced alot of challenges in c b4 this video

[@EverythingComputerized]

Happy to help buddy!

[@kumarankit9243]

i jump from google page after watching full video to like your video.. thanks bro👌👌

[@EverythingComputerized]

Thank you buddy! 😊

[@AchinikeLawrence]

It was really helpful thanks

[@VipinSingh-kt9dz]

cool work man. keep doing it helps people.

[@EverythingComputerized]

Thanks buddy!

[@NekalviKamberiAnimeTV]

I would like to know about the compiler tutorial?

[@nasrinadan8006]

Thank you so much for solving my issue.

[@EverythingComputerized]

✌❤

[@VetrilingamNadar]

Thanks 👍👍👍👍

[@ghostgamer_001]

Thanks brother 🍁❤️

[@EverythingComputerized]

Always welcome

[@mirzamuzayyana5990]

Very helpful 👍🏻👍🏻👍🏻👍🏻

[@EverythingComputerized]

😇

[@ahmedabbas_forweb5774]

Amazing ❤

[@EverythingComputerized]

Thank you! Cheers!

[@trishool4635]

Tq u bro it's helpful lot

[@EverythingComputerized]

😊❤

[@abelyonas3895]

i am very appritiate sir ,and also tnx tnx tnx keep it up!🍊🍊🍊🍊🍌🍌🍌🍌🍌🍌☕☕☕☕

[@EverythingComputerized]

🍉

[@angelcunanan4490]

Thank you so muchhh

[@EverythingComputerized]

❤😄

[@hafsanoor8979]

Thank you so much

[@EverythingComputerized]

✌🙌

[@btsarmygirl-nn4kr]

I am new to code blocks . I have some matter under logs and others ,after writing program i can't build the program.why is it happening?

[@EverythingComputerized]

See the error logs.. if there is compilation error, there is something wrong with the code. If the problem is different, maybe the codeblocks or its version is not installed correctly or some other issue (in this case, just do a google search on the error).

[@kuldeepkumarprajapati4596]

Do we need to install compiler?

[@EverythingComputerized]

I've shown the Compiler setup only.. MinGW is the compiler used by Codeblocks..

[@ommprakash6813]

Bro mera app open hone ke baad left side me jo tree like structure (workspace, main. C) show nehi kar raha he

[@EverythingComputerized]

Usko expand krna pdta h.. management window agar present h, tb expand krna hoga apko baki ke nodes ko.. Agar window hi present ni h, then apko usko view krna hoga usko. Shift+F2 press krke usko hide ya unhide kia ja skta h

[@kuldeepkumarprajapati4596]

Thank you...but on click build, I am getting one error as: No such file file or directory ===Build failed: 1 error, 0 warning (0 minutes ), 0 seconds I did each and every thing exactly as u explained in your both videos Please help

[@EverythingComputerized]

Try to restart your pc, and then create new project again.. this might be a glitch..

[@kuldeepkumarprajapati4596]

No....I tried it ...so Many times. But still the problem persists.

[@TrinhNguyen-gj7sf]

nice

[@fatmambarak248]

Please assist on where to click on 3:38 to choose either c or c++

[@EverythingComputerized]

Watch the video without skipping.. you'll get it.. I've explained it in chapter 1:05

[@Banneord]

I tried to run the program (the one that came with the software) and it failed? I literally did nothing to change it, what's going on?

[@EverythingComputerized]

What error are u getting

[@barbramwendwa1438]

The video is very detailed🎉 My question is how to access the lower part of the program 😊"the one contacting the error message" I think I exited it and I can't find it.

[@EverythingComputerized]

I think you'll find it in window or something..

[@pfbrodriguez]

how can I add cmake to this equation ?

[@EverythingComputerized]

Not much idea about cmake buddy

[@ajanidyer6899]

Um, the code the program automatically gave was rejected by the code. What to do??

[@EverythingComputerized]

U might have not installed it correctly

[@shubhamthakor7070]

Bro I had followed same steps as you but till it's shows complier error

[@EverythingComputerized]

Can u please send me the snapshot of the issue on instagram.. I'll look into that, and if its a major and common issue, I'll try to upload a video on that.. My insta id - everything_computerized

[@CollinsNjenga]

thanks👍👍🤜🤛

[@EverythingComputerized]

Welcome 👍

[@user-ph7pf7xe6d]

That's it!

[@abc-ym4zs]

Bro In my laptop the space for workspace is very less what should I do to get space like in this video

[@EverythingComputerized]

I have a playlist named Windows 10.. There I've added a video to speed up PC.. Watch that.. I am sure you'll get few gigs of storage free. For your convince - kzbin.info/www/bejne/eGexnodoh9tjY7c

[@abc-ym4zs]

@@EverythingComputerized I am saying in the code blocks application there was workspace in that there is less space and more space is covered to write programe what should I do to get some space

[@EverythingComputerized]

For that u can expand/contract the tabs present in the workspace. Also, you can close the bottom tab that shows the debug and compile message.. U can change its size too.

[@abc-ym4zs]

@@EverythingComputerized thanks bro I got It

[@abc-ym4zs]

@@EverythingComputerized I have one doubt. When I am using turbo c in that how we can enable functional keys for ex when in that compiling we should click F9 when I am clicking F9 normally it was not compiling

[@x...Joy...x]

Thank youu

[@EverythingComputerized]

🤗🙂

[@chimyang8851]

Bro whenever I press F9 my laptop is getting closed.. what should I do ?

[@EverythingComputerized]

Seems your F9 key is mapped to lock windows. There will be a key named *Fn* on the lower row of your keyboard. Use that with F9 to make it work. Press the following key combo- *Fn+F9*

[@chimyang8851]

@@EverythingComputerized ✌️ done bro.. thanks for the reply 😀

[@EverythingComputerized]

😄❤

[@wishicouldarduino8880]

Is there a way to use this with arduino ide?

[@EverythingComputerized]

After quite of research, I found a modified version of Codeblocks that's made for arduino. Its outdated now, and there's no easy way to integrate arduino and codeblocks. U need to recreate the arduino builder files (something related to core compiler sort of thing) to make it work with codeblocks. For your reference - arduinodev.com/codeblocks/

[@wishicouldarduino8880]

@@EverythingComputerized thank you.i was wondering what codeblocks is actually used for I'm trying to program my annie robot installed codeblocks in pi 4 and arduino also is shows a build for arduino in codeblocks but you are correct it wont build it .can codeblocks be used with open CV? It is an interesting system.

[@EverythingComputerized]

I cant tell much about that. A simple googling can help u with that!

[@wishicouldarduino8880]

@@EverythingComputerized cool thanks 😁👍

[@poloff9120]

McAfee is not allowed my program to run I don't know why? it shows "Process terminated with status 32764 (0 minute(s), 22 second(s))" pls say me a solution to stop McAfee

[@EverythingComputerized]

Show me the code that you are trying to run.

[@poloff9120]

@@EverythingComputerized how will share?

[@EverythingComputerized]

Instagram, or paste the code in the comment section..

[@kuldeepkumarprajapati4596]

I restarted....but still the problem persists.

[@EverythingComputerized]

Do one thing.. send me the photo of the problem, or the error that you're getting.. I'll try to solve it. My instagram id - everything_computerized

[@IdiotPhage]

Savior

[@shivmilanyadav2982]

I have window 7 of HP laptop But still my app is not running there is written(The procedure entry point ucrtbase.wcsncmp could not be located in the dynamic link library api-ms-win-crt-string-[1-1-0.dll.

[@EverythingComputerized]

Newer applications require you to have Windows 10.. You can download older version of Codeblocks. Download Codeblocks16. The link is below sourceforge.net/projects/codeblocks/files/Binaries/16.01/Windows/ The download method will be same.. look for mingw setup.. 64 or 32 bit will depend on your computer. Before installing this, first uninstall the previous codeblocks that you've installed.. for that, you can go to control panel>uninstall programs , then double click on codeblocks to uninstall.. Then install the one from the link above.

[@rahulbhandari9177]

can't see sources option

[@EverythingComputerized]

Your project might be minimized. On the left, you'll be seeing your project name. Double click that to expand it, and you'll get Sources there😄🤗

[@rahulbhandari9177]

@@EverythingComputerized no I can see my project name but I can’t find the sources option below it. And double clicking on it didn’t work either

[@EverythingComputerized]

@@rahulbhandari9177 try recreating the project again.. there might be a slight mistake I guess..

[@hazelyray4283]

F9 is not working for me. It fails to BUILD AND RUN

[@EverythingComputerized]

What is it showing?

[@sameer-mo7zn]

Press alt+f9