Рет қаралды 29,639
In this video we put in the two lines of catch wires needed to hold the leaf wall up and away from the grapes that will hopefully dangle from the main trellis wire.
The catch wires are spaced approximately 25-30cm for the first set above the main trellis wire and the about 30cm-35 above again for the second set. Not absolutely strict on the spacing. Many people use 30cm gaps for both sets of wires.
In this video I used the follow equipment
✅ 2mm galvanised wire
✅ Spannfix wire tensioners and tool
✅ Tape measure
✅ Hook Nails and hammer
✅ Wire turner to tidy up the end wires.
The wire tidy can be found here: bit.ly/2LgbroD
I got the spannfix wire tensioners and the hook nails from:
www.vigoltd.com/
Also have a look at www.winegrowers...
They have a wealth of information and are really helpful.
If you want to see my other channel that is completely unrelated to this one then you can do so on this link:
/ @talkingmoney5990