Coil Winder Update with Tensioner Guide

Home Made coil winding jig with tensioner guide added.

[@crackspider101]

Super satisfying to watch!

[@fabiodejesuscamargoeletricista]

Fantastic production my friend conglatulation for The vídeo!

[@SFORSANDEEP]

Sorry How you made it to avoid overlap in same layer... I didnt see any mechanism which moves the wires left or right..

[@HayabusaRydr]

Very nicely done!

[@edelsken]

Very Helpful video!

[@nadingjeff]

Nice coil winder, think I will be building one for myself, think I've figured a way to move the wire left and right with an auto feed, also adjustable for different thicknesses of wire.

[@kermitfrog1897]

Thanks for sharing, nice work. Can you tell me where you sourced the o-ring type belt for sewing machine motor?

[@jameselliott9397]

Is there any electric produced from the coil winding process? Do motor coils use or produce more electricy when they get warm?

[@captainprototype187]

These wider designs are very interesting. I will use the left to right slider idea.

[@absolute___zero]

great stuff! I am going to do the same kind of a machine. Checked the arduino-based machines and that's lots of work. No time for this. I just need a few coils to be made for a magnetic bearing, doing a high precision 3d printer here. Semi-automatic approach is the best of two worlds, and if you do it with the idea of being upgraded later then it is the ideal solution.

[@steinie44]

Like this. Where do you get the blank spools? Have a look at my Solenoid Engine - Motor.

[@widar28]

Thats a really nice machine :) What material is the wheel holder made of? (The white plastic)

[@ClownWhisper]

BACK' OUT MAN!!!!

[@ventsi002]

Well,what would you do if you have to wind coil with wire 0.1 millimeters of diameter?

[@robstechchannel3687]

...now that is NEAT!

[@THOMASTHESAILOR]

Nice machine !! What are the coils used for ??

[@dwtees]

Ingenious thinking on your machine development. You should get a patent! Where do you find your transformer bobbins and laminations?

[@6969smurfy]

where do you get big bobbins at?

[@alexjohnson9646]

What drives the side to side reel motion?

[@skycraft66]

what would you charge to wind me about 16 coils 17awg 2.75" diameter and 1.75" long air core no bobbin?

[@EnergySeeker]

am looking for a small machine to put a coil on U shape core what do you think ?

[@50jegadeesan]

sir what is the type of mechanism and name of that part which is holding the vice .very simple but effective device.superb.

[@leifkeane]

Thanks!

[@Alrukitaf]

Very valuable information. Thanks for uploading but better if the camerawork was more steady. Avoids motion sickness.

[@DolezalPetr]

very nice

[@Zenseivideo]

Do you have part drawings you would like to share?

[@satzy3132]

So once you got the first layer why did you start from the left end at same density ? I thought it’s better to take the wire to the right and start coiling again .. for an electromagnet it might be more efficient isn’t it ?

[@JoseAntonio-tt2mb]

Você o projeto da parte mecânica para me enviar ?Estou com dificuldades para desenvolver ,quero fazer uma bobinadeira para enrolar bobina de maquina de solda .

[@dm.2023]

To what end? Solenoids? Electromagnets?

[@makeitso3049]

Make it Arduino based. Then you'll get perfect windings. I have done it. I even made 40k rounds high voltage transformer with it with thick plastic insulation between each layer.

[@-__-_-_--__--_-__-_____--_-___]

it'd be nice to get one of these and a mega large spool of vv fine gauge copper wire and start a speaker company...

[@rockypan8883]

It is like our machine

[@raycota4322]

are you interested in bulding one for us . i can let you know details if your interested . we started to build one but just dont have the time as we have numorous projects going on , let me know .

[@nazgullinux6601]

Could you not have used a very cheap hall effect sensor and small magnet to count the turns rather than the very annoying mechanical button...

[@aelectric]

Good Good

[@kutubuddinhatnur220]

wainding Wair splayar cantect

[@byfran6445]

Estaría sensacional que un Arduino controlará el enrrollador

[@aishinozaki7184]

tek-tek-tek-tek

[@umerchishtti7698]

ai shinozaki hi

[@ve6but123]

Excellent video very nice setup like to build coil 4 inch diameter with 18G wire 9 to 11 ohm for a levitation project I have build 12 coil for local school, is it possible to receive parts list so I can build one to, Ve6but at shaw.ca Best regards Tosif

[@pir869]

Your pulling the wire from the reel in the wrong manner.

[@victoryin6257]

traverse bay hand? are you kidding me?

[@Wowzersdude-k5c]

Can you wind a coil for my e-cig mod? ;)

[@ATCINT]

trvmachine