This is informational video how to light up , maintain and regulate smoke flow on Cold Smoke Generator "Mark V1" Please subscribe and ask if you have some questions ... Recipes are coming ....
Пікірлер: 36
@AlexVynohradov2 жыл бұрын
Thanks mate
@cbpuzzle Жыл бұрын
The condensation CAN be fixed. Put the Venturi tube at the TOP of the canister and the steam will rise the same. Then on the exit tube another vertical condensation extraction tube with a drip glass jar at the bottom. The steam will exit with the smoke, rise through the condensation tube while the steam cools it will drip down into the glass while the smoke keeps going up and out the exit pipe.
@ReallySmoking Жыл бұрын
sadly but not ... Smoke daddy has tube in upper side - way more problem then with my generator. I still have somewhere old Smoke Daddy. Making another collector - who will be cleaning tubes ?? i just need to clean one short.
@USA__2023 Жыл бұрын
I have one similar to your description. It's a true cold smoke generator. 16 pounds and over 30 inches tall but works well
@marksabota4056 Жыл бұрын
I have the same issue when my lid is open condensation is so much and even after 1-2hours my fire goes out. I keep them dry indoors, but still not burning.. Have you tried drying your chips in the oven before smoking it? Some people it says it helps a lot, I might need to try that
@ReallySmoking Жыл бұрын
i heard about it - never did. Usually i go to check how smoke is going every 30 - 40 min . That's when i open lid and shake condensation to the side - you can even wipe that with paper towel. Humidity of the air is bad factor - especially when it is raining.
@marksabota4056 Жыл бұрын
@@ReallySmoking yes I noticed that, I've previously smoked only in nice sunny days, but still after 1-2h my smoker dies and walls with lid seem to have lots of moisture. Now I will try drying my chips even more in the oven and then light them up, thanks! 👌
@gozzoz73102 ай бұрын
Did you try pellets maybe? 🤔
@ReallySmoking2 ай бұрын
i did - just need to do mix , not only pellets.
@38possum Жыл бұрын
I would just run it without the lid or order a chimney cap from a pellet grill, the chips are gravity feeding anyways. Probably could buy a 1 BBL carburator air filter housing and make a breathable cap.
@ReallySmoking Жыл бұрын
that would add additional airflow and it could create additional issues ...
@SuisseKisses Жыл бұрын
What's the Masterbuilt model? is it a 40 in or a 30 in propane smoker? Any recommendations?
@ReallySmoking Жыл бұрын
all depends how big batches you planning to do - if big i would go 40. Models changing - so i would say buy on sale and be ready to buy another 3-5 years later - they getting rusty and eventually you will change them.
@jamesbull54823 жыл бұрын
I've seen this smoking cabinet for sale. It doesn't have a hole for the external smoke generator. Did you drill it yourself and if so, was it easy to get through? Thanks
@ReallySmoking3 жыл бұрын
it is next video on my channel : kzbin.info/www/bejne/bojOpqend5Wfeas - it is easy to install and walls are not too thick.
@jamesbull54823 жыл бұрын
@@ReallySmoking perfect thanks. I'll watch the video
@catateo20024 жыл бұрын
The heat from the cold smoke generator will be blown inside the grill... how hot will it get inside the grill from this?
@ReallySmoking4 жыл бұрын
depends on size of grill. if like mine about 3-7 degrees
@mokrohond3 жыл бұрын
Hi, Where can I see your product on ebay? How much does it cost? Can I do hot smoking using this smoke generator?
@ReallySmoking3 жыл бұрын
yes , if you will search for "Cold smoke generator Mark V1"
@Spencer6th4 жыл бұрын
Will you ship this item to Canada?
@ReallySmoking4 жыл бұрын
would be better to communicate thru ebay. i could, but do not know how will be with shipping expenses.
@ravinoashurov43 жыл бұрын
How many volts is it?
@ReallySmoking3 жыл бұрын
110 v . on ebay you can find any voltage you looking for
@robertbrown33066 жыл бұрын
Where does the ash go how do you clean it out?
@ReallySmoking6 жыл бұрын
It is a very good question ... it is just on the bottom of Fire Chamber ... it is not a problem to generate smoke for 2-4 hours and ashes will not interfere, but if you want to continue generate smoke you can just lightly clean thru the same air flow opening - aches will be falling on the ground. After each smoking usually you will demount unit and just clean it - i store my unit in plastic bucket, so i'm able to clean it after every use ... and that tray under unit actually is to catch falling ashes ...
@robertbrown33066 жыл бұрын
Really Smoking Thank You I appreciate it
@allachopovsky8885 жыл бұрын
Where can I buy this smoke generator?
@ReallySmoking5 жыл бұрын
sorry , i'm getting out of stock from time to time, but please check my ebay listing and eventually it will be there. look for "Mark v1"
@africantwin1735 жыл бұрын
Dymbox.pl 77 euro's 2.32 liters capacity incl pump and chips.
@shavkat84 Жыл бұрын
So its not cold smoke its hot smoke the exhaust has to be up from fire and longer for cold smoke
@ReallySmoking Жыл бұрын
hot smoke it to big chamber - add tray of ice and it will be cold smoke ... Cold smoke is counted up to 35 degrees of C ... i believe
@SuisseKisses Жыл бұрын
...smoker not found on ebay
@ReallySmoking Жыл бұрын
It was removed - maybe will have some units before holiday.
@tonyparton3522 Жыл бұрын
Looks like a bad copy of the original Smokai Smoke Generator from New Zealand!
@ReallySmoking Жыл бұрын
You mean WAY BETTER idea ... can you send me link where that generator is shown after couple years of use ?? Maybe they copied from me ...