This the Mysticsmokers collector kit assembly and installation video. Several aspects or components of this assembly are pending patent processing and may be protected.
Пікірлер: 34
@lukenilles60678 күн бұрын
Have you tried combining the collector box with a 90 degree elbow? If you re-worked your template, you could probably find a good way to fit them within each other and get the best of both worlds. I plan to try that with an upcoming build, and will likely use your templates as my starter..
@MrWillowbeard Жыл бұрын
Excellent video, as always! Thank you!!
@mysticsmokers3014 Жыл бұрын
Thanks buddy!!!! As always. Lol
@jayaleman9340Ай бұрын
I noticed you said you were located in Georgia I am also in Georgia and would like to be able to contact you..... I have a smoker I am trying to build out of an old smoker on trailer which is something I could bring or at least purchase parts for if possible.....
@metal758014 ай бұрын
Can I possibly get some pics of the roller workstands shown in this video?
7 ай бұрын
How do you roll the horizontal door bands? 33:34
@genovinchenzo42374 ай бұрын
Do you build these for 8” 500gallon? I saw the hinge-but not the collector-thanks! Love the channel. I’m ordering the hinge-but want to check on this first
@mysticsmokers30144 ай бұрын
Yes, I do. It is on the website and the Etsy shop by the same name. It's called the 8x22E/H it works with hemispheric and Eliptical tanks. Contact me through mysticsmokers@gamil.com if you have problems finding it. I just checked, it's there. Free shipping as well at the time of this conversation.
@burntendzzz Жыл бұрын
So 6” stack is what’s needed for a 250 gallon?
@mysticsmokers3014 Жыл бұрын
Yes. That is perfect for a 250. I dont start using 8" until 330g.
@pewsician238814 күн бұрын
Have you ever tried or considered using a bell (like on a horn) into a curver 90° elbow rather than a collector? Any thoughts?
@mysticsmokers301414 күн бұрын
@pewsician2388 I'm not quite sure what you mean. Can you elaborate a bit?
@cookbbq24775 ай бұрын
What is the total length of the 6” stack used one your 250 gallon tank?
@mysticsmokers30145 ай бұрын
50"
@JB-dg8de Жыл бұрын
Are the kits available for sale the latest version with the longer standoff?
@mysticsmokers3014 Жыл бұрын
The 6-inch and 8 inch versions for 30 inch diameter tank (250 and 330 gallon) are on the mysticsmokers.com website and Etsy shop by the same name. I will have the 6-inch collector for a 24-inch diameter tank (120g-150g) later this week. And yes, the proper stand-off distance is the current design.
@JB-dg8de Жыл бұрын
@@mysticsmokers3014 Thanks for the quick response, width of the 6/24 model? I’m looking to modify a flat end smoker.
@mysticsmokers3014 Жыл бұрын
@JB-dg8de That's a great question, and for a flat end, you may want to choose between the two versions, so let me give dimensions for both: The 6" - 30" diameter version is: -6" tall -6-5/8" hole for sch#10 -22" wide at the tank opening The 6" - 24" diameter version is: -6" tall -6-5/8" hole for sch#10 18 inches wide at the tank opening. So, in short, both versions would work on a 24-inch flat end tank. Personally, I would prefer the wider opening. Feel free to email me at mysticsmokers@gmail.com Or find me on FACEBOOK MESSENGER. I'm easy to spot. I'll provide my phone number for easier/faster communication.
@BarHRanch6 ай бұрын
How’d you roll the horizontal bands on the doors?
@mysticsmokers30146 ай бұрын
Very large press brake.
7 ай бұрын
How do you roll the horizontal door bands @ 33:34?
@mysticsmokers30146 ай бұрын
A VERY large press brake.
@jayaleman9340Ай бұрын
Would like to purchase this kit don't know where to go though..... If you could provide a link I would appreciate it
@mysticsmokers3014Ай бұрын
Here is the link to the 6x22E collector kit. This is for 30" diameter tanks (or pipe) with Eliptical end caps. The 6x22H is for hemispheric tanks. They have the "bubble" end caps. The 6x18 version is for 24" diameter tanks or pipe. The 8x22 is for 330g or 500g cookers using 8-5/8" OD pipe Feel free to reach out via mysticsmokers@gmail.com and I can provide a phone number if needed.
@U.S.A-Fireworks4 ай бұрын
That is Schedule 10 pipe? Wouldn't that be super thin?
@mysticsmokers30144 ай бұрын
Schedule 10 is perfect. The 8 inch pipe in sch 10 is 3/16" wall thickness. Any more is completely unnecessary wgt.
@kurtstovall1 Жыл бұрын
do you sell the collector kit
@mysticsmokers3014 Жыл бұрын
Yes on the mysticsmokers.com website and the Etsy shop by the same name.
7 ай бұрын
How do you roll the horizontal door bands?
@mikencrcf60187 ай бұрын
The vertical bands are rolled on the roller. The horizontal bands are rolled on a large press break. They match the curvature of the tank perfectly.
@robertrodriguez12406 ай бұрын
I like what you do but you talk too much sorry all and all you do great work
@mysticsmokers30146 ай бұрын
Well, the nice thing is, you can always find another(s) creator to watch. There are tons of guys doing videos on cooker builds nowadays. Sorry, my style isn't for you.
@user-wq4pi8ez7c6 ай бұрын
If your looking to build one of these for real the talking is appreciated
@mysticsmokers30146 ай бұрын
That was my thinking. I get aggravated watching instructional videos with no narrative. Especially if it's a tool or something im interested in repairing or building. There's so many tips or warnings you miss and have to learn the hard way. @user-wq4pi8ez7c