Colossus is a 1m x 2m LED display with a 25x50 matrix of WS2812 LEDs. Find more details at: maniacallabs.com/colossus
Пікірлер: 46
@poppopw53057 жыл бұрын
This is nothing short of FANTASTIC!! Great job!
@hamburgtech6 жыл бұрын
Really nice project, such a big led matrix is impressive. I need to build one of these next year ;-)
@jacobdavis0005 жыл бұрын
Very good engineering. It looks nice on the inside too.
@erazmohammed71868 жыл бұрын
You should use knife edges on the partitioning side that is against the defuser to reduce the black areas showing up between pixels..
@nathreed8 жыл бұрын
What's the music on the demo scene part of the video (starting at 2:05)?
@m.a.kaderjibon57097 жыл бұрын
super
@Zampoteh8 жыл бұрын
It's good for Tetris.
@Maniacallabs8 жыл бұрын
+nathreed - Pachabelly by Huma Huma, from the KZbin Free Audio Library
@abdultairu7 жыл бұрын
Good job. To me looks like the LED used are actually bullet type WS2811 model not version 2812B which is usually stripe form factor
@anishaered Жыл бұрын
😮😮😮 awesome
@yashpaltamrakar13846 жыл бұрын
Can we use this LED display for moving letters like advertising purpose . Can I take detail knowledge please
@queenidog15 жыл бұрын
How bright? Can it be seen in direct sunlight? How far away is it visible at night? I had to go with 3W LEDs for my project so it could be seen from 100 meters, at night.
@Maniacallabs5 жыл бұрын
They are standard ~0.3W LEDs each. Barely visible in direct sun. At night it's fine but no idea of distance as I never used it beyond ~5 meters.
@HappySlappyFace7 жыл бұрын
2:50 he played namco my life is complete
@shled94966 жыл бұрын
This is nice. Hope there is a chance we can help with the led product. Welcome your contact when need
@sakirvaddariya88206 жыл бұрын
Which a controller used
@abdullbasitalhaita67998 жыл бұрын
Great work. Can you estimate the total cost of the entire project? I'm interested in building one like this.
@Maniacallabs8 жыл бұрын
+Abdullbasit AlHaita - Probably around $700 in total. The LEDs were about $450, but we bought them direct from the manufacturer in China. Then power supplies, lumber, foam core, copper for the power rails totaled another $250 or so. And then a ton of time... couple hundred man hours probably. It would obviously be much faster if built again, and we kind of did things the hard and slow, but cheap way.
@abdullbasitalhaita67998 жыл бұрын
Thanks man
@Aimeeworldsemi8 жыл бұрын
Now we made WS2813, dual-signal version, that is WS2812 updated version(●'◡'●)
@mccc45595 жыл бұрын
@@Maniacallabs I am proud of you.
@nataliat77905 жыл бұрын
Hello, may I know what power supply do you use for this?
@Maniacallabs5 жыл бұрын
We used two 40A @ 5V MeanWell power supplies. More details here -> maniacallabs.com/colossus
@IgloodiscoCoUk7 жыл бұрын
Can i buy one of these displays? Or can you make them to size & order?
@Maniacallabs7 жыл бұрын
@Igloo Disco - Send us an email via contact@maniacallabs.com, give us an idea of what you want and we can discuss more.
@jessiefeng32697 жыл бұрын
yes. of course. what size do you want ? we can do for you . the professional led manufacturer with own factory. give me your email or send us a email Jessie EmaiL;jessie@witop-tech.com phone:0086+15676178187
@redtex4 жыл бұрын
Идеально для тетриса.
@Klonkiller3618 жыл бұрын
And now make it Full Hd
@AlexShelbySir7 жыл бұрын
what was the cost for all the LEDs alone?
@Maniacallabs7 жыл бұрын
Around $600 total, purchased from the manufacturer directly. Retail "street" price would probably be more like 1200-1500.
@jessiefeng32697 жыл бұрын
Oh. we are the led manufacturer. we can provide you the more details. that's 12mm pixel give me your email or contact me is ok. Jessie EmaiL:jessie@witop-tech.com phone:0086+15676178187
@hirnlager8 жыл бұрын
is it possible, you incrase the resolution with vibrations? ;)
@Maniacallabs8 жыл бұрын
+hirnlager Not sure what you mean...
@ramasamystudios41012 жыл бұрын
Tetris...!!!
@gadgetboy388 жыл бұрын
Just need to run tetris on it now :)
@Maniacallabs8 жыл бұрын
+Charles harman Way ahead of you :) That video is coming soon!
@bob-ny6kn2 жыл бұрын
Wow. 1300 x drill, insert, (4 x solder), glue, screw, watch, more steps... if all goes right the first time. Try the linux 'bb' code...
@HappySlappyFace7 жыл бұрын
MAKE IT AN AMBLIGHT!!!!!!!!!!!
@Maniacallabs7 жыл бұрын
LOL... have something like that in the works... and about 12 feet tall ;) In the meantime: maniacallabs.com/2015/04/13/ir-remote-controlled-tv-bias-light/
@HappySlappyFace7 жыл бұрын
Lel
@HappySlappyFace7 жыл бұрын
Reply when done
@olly35807 жыл бұрын
why just why
@Maniacallabs7 жыл бұрын
The only reason we need... because we can.
@Benefit1877 жыл бұрын
why not
@EveMcWinston8 жыл бұрын
very very very very expensive kind of a LED display. Easier to control, but please not for that price. this thing should be a nice heater!? 375W?! Should be sensible warm in front of this display. Nevertheless, big respect for the work! very time consuming work...