I've fired close to 1,000 rounds out of this gun and have had zero issues!
Пікірлер: 187
@CobraKaiNoMercy3 жыл бұрын
Before somebody says anything... In the video I said accidentally HKS Golden Saber ammo. What I MEANT to say was "HKS Speedloader with Remington Golden Saber ammo".
@jasonvoorhees27013 жыл бұрын
No worries my man ..if you gotta explain that ..they should go watch cat videos..
@CobraKaiNoMercy3 жыл бұрын
@@jasonvoorhees2701 True that.
@johnstockton81382 жыл бұрын
They ironed out the kinks for the king cobra by mid 2020 to 2021. The problems you mentioned are from people who got the gun in 2019 and early 2020. They having problems in the 2021 anaconda now and probably some 2020 pythons. They seem to not be able to have the resources to QC new products as well as other companies. Probably due to funding issues, but since CZ took over this year, it will get better from now on.
@CobraKaiNoMercy2 жыл бұрын
@@johnstockton8138 Sorry for the late response. Yes you're right, and I covered this in my video. Unfortunately a lot of people still think the King Cobra is plagued with those issues
@reygallegos49122 жыл бұрын
@@jasonvoorhees2701 this comment almost made me spit out my coffee 😂😂😂
@MerwinWren4 ай бұрын
My King Cobra, purchased August 2023, locked up after 300 or so rounds. Sent back to Colt. Apparently the hammer broke so they replaced it, adjusted the timing and endplay, and returned it within 30 days. No problems since. Ran 200 rounds through it so far but won’t trust it for EDC until I run 500 through it.
@daverenick58302 жыл бұрын
I bought the 3 inch today. I guess yours is optimal for conceal carry. The 3 inch just had a balance I liked. The 4 inch target's a great looking gun and gave me pause too. All of them are things one wants to get. I've also heard about manufacturing issues on King Cobras, so I'd hope the majority don't have problems.
@FlipFlopandFly2 жыл бұрын
What a beautiful revolver! Just picked up my SS KING COBRA TARGET.
@CobraKaiNoMercy2 жыл бұрын
Nice. Enjoy!
@moreme40 Жыл бұрын
3” King Cobra owner here. You obviously take care of yours well
@claytoncarter40712 жыл бұрын
I'm A Smith fanboy but with that being said I said I handled this exact gun at the store today And the double action trigger felt smooth like butter and the single action felt like glass breaking they want $899 for it I'm thinking about going back and getting it
@claytoncarter40712 жыл бұрын
Well I'm now the Proud Owner of this model king Cobra and an 8in Anaconda, I must say the Anaconda trigger in single and double action is even better than the Cobra. Again as a Smith Fanboy, I'm sad to say My Cobra, and ESPECIALLY THE Anaconda, not only have smother actions than Smith .....But both, again ESPECIALLY the Anaconda ....are also better Presentations then what Smith&Wesson is Currently offering.
@CobraKaiNoMercy2 жыл бұрын
@@claytoncarter4071 Enjoy man 😀
@Zona-dw9rp2 жыл бұрын
Good for you! Enjoy ...
@Boot2Ass242 жыл бұрын
I was planning on getting something else and I held this and compared it and I just couldn’t walk out of there without it I bought the cold king cobra target and it was wow the smoothest probably my favorite and then I’m glad I got one before the prices start going up! Waaaaaay better than the python, especially double action, this is awesome!
@claytoncarter40712 жыл бұрын
In 2022 they are the best Revolver money can buy IMO. Smith is turning out to many lemons as is Ruger and the rest.
@unclesam7612 жыл бұрын
Beautiful weapon I got a 3 inch and I carry it everyday 2nd Amendment forever
@jltsvlogs1837 Жыл бұрын
Concealed or open carry
@Jace8637 Жыл бұрын
@@jltsvlogs1837 When I had my 3in version I carried it iwb. It’s similar in size to a G19.
@michaelfay7942 жыл бұрын
I have the 3" and love it.
@CobraKaiNoMercy2 жыл бұрын
It's a great gun!
@royyates1558Ай бұрын
Sweet! I bought a 3” a month ago. Love it!
@roberthones6 ай бұрын
Very nice revolver there. I have the 3" version and love it.
@Zona-dw9rp2 жыл бұрын
Colt offers a one-year warranty while Smith and Wesson offers a lifetime warranty. For that reason, I bought a Smith and Wesson. Good video, thank you.
@CobraKaiNoMercy2 жыл бұрын
If you’re happy with your purchase that’s all that matters
@Zona-dw9rp2 жыл бұрын
@@CobraKaiNoMercy Cobra Kai, you REALLY got me thinking about this gun. Subscribed.
@mynameisjeff6988 Жыл бұрын
Sometimes a great warranty is something you DONT want. The best warranty is the one you never use. What good is a gun thats at the factory being worked on, you know?
@Zona-dw9rp Жыл бұрын
@@mynameisjeff6988 Ha, ha .... good point. Happy shooting!
@yokoshemp2 жыл бұрын
I really like my King Cobra. The trigger pull is basically identical to my original Python. Same pull weight, same pull length, same hold spot for double action aim, and same sweet let off. I have yet to shoot well with .357 rounds in it. The recoil is something... I have other 357, 44mag, 45 to compare that with. Only my 44 mag has more muzzle blast and recoil. If I load with 38 wadcutters I get a wicked little concealed carry gun. With those 38 loads the KC puts shots where I ask it to. I had to special order a holster. My 3" KC will fit in the back pocket of my work pants... not a great draw spot but very stealth and easy carry... don't sit on it. At the moment a 1911 is doing edc for me but come summer with less bulky clothing and I'll go back to the KC.
@VeryAmateurBrewer8 ай бұрын
You are lucky. Got mine 3 months ago, total piece of junk. It’s broken twice so far in 2 different ways. It’s currently back at Colt (for the second time) and i’m still waiting. Requested a replacement so we’ll see what they do.
@tonybennett2532 Жыл бұрын
I would like one...made completely out of titanium
@pgiuliano73 жыл бұрын
Love my king Conra crazy about the accurate shot placement it gives me.
@crippleguy415 Жыл бұрын
I want a snub nose Python . Or a .22 MAG is a snubnose with rear adjustable sights like the old DIAMONDBACK .
@yellowboxster06 Жыл бұрын
I’ve carried a Ruger SP101 2.25” for years. When the KC came out I figured eventually I’d pick one up but I wasn’t in a hurry because I rather liked the SP101. A couple of weeks ago my range got in a 3” Python. No sooner had it made it into their display case when I came along and grabbed it. My friend at the range told me they were getting in a couple of King Cobras. Now I have stress. I fully expect to own a KC before I get much older especially if their triggers are even close to the Python’s trigger.
@CobraKaiNoMercy Жыл бұрын
The only real difference I have noticed is that the Python has forged steel parts (trigger, hammer, etc), whilst the King Cobra has metal injection mould (mim) parts. Apart from that the triggers are nearly identical.
@Mr_Santo53 жыл бұрын
I've been looking at getting one. I notice that Colt lists specs as brushed stainless but from every pic and review I have seen it looks polished to me.
@CobraKaiNoMercy3 жыл бұрын
The Cobra is brushed stainless, the King Cobra is stonewashed and then polished.
@user-xk1sy9pl6z3 ай бұрын
Inconsistant light primer strikes, broken hammer linkage, other than than that a wonderful revolver! Rolling with Kimber these days!
@booman15453 жыл бұрын
We need to wait for CZ to take over QA on the revolvers. Existing colt employees are just plain horrible when it comes to quality assurance.
@paulsonneborn8164 Жыл бұрын
Any holster recommendations
@kevinpoole96623 жыл бұрын
Beautiful !
@KatoCoyoteCombatWorkshop2 жыл бұрын
The King Cobra has been on my list for a while. I rock a 4" 686 Plus in a kydex iwb holster but I want to be able to use safariland speed loaders. it's been a couple years since it dropped so it might be a safe bet now especially since they can be found new in the 700s
@CobraKaiNoMercy2 жыл бұрын
I got mine for like $100 off compared to what it solid for back in 2019. It's important to avoid the avoid the first iteration of the King Cobra (I've seen those for $700 as you say).
@CobraKaiNoMercy2 жыл бұрын
Also I have a vid up of a 4' 686 compared to the King Cobra if you wanna see.
@KatoCoyoteCombatWorkshop2 жыл бұрын
@@CobraKaiNoMercy Would love to watch that one, though I can't seem to find it on your channel, but I'm also just looking for thumbnails of two revolvers or specifically "686" in the title, can you point me in the right direction?
@CobraKaiNoMercy2 жыл бұрын
@@KatoCoyoteCombatWorkshop Sure, here you go. kzbin.info/www/bejne/rH6VhH2wbZqljZY
@sevenin1 Жыл бұрын
I carry the Night Cobra often in my left jacket pocket when riding my Harley. When you're out in the boonies or long pieces of interstate highways you would be surprised at the amount of idiot bullies and the ways they attempt too potentially kill you when on a motorcycle. Suddenly everything changes when they see the equalizer come out. I could care less about them reporting someone brandishing. I'm legal to carry, clean driving record and ret. LEO.l have more than a few good revolvers for pocket use. Bobbed hammer on the Night Cobra and Smith& Wesson 340 PD,442 Air weight all function well inside a hoodie pocket and of course very well at the range. There's always a use for a well made revolver. Nice piece.👍
@nfaisnfgay8 ай бұрын
Man, you really reinforced that stereotype
@dexterwinslett89302 жыл бұрын
Thank you. Due to the Smith Clinton hole, this will be my next revolver.
@maxmccain8950 Жыл бұрын
Man I love the finish on that. Is that the way it came or did you do some polishing on it? Great video sir.
@CobraKaiNoMercy Жыл бұрын
It came this way.
@theoriginalOSOK Жыл бұрын
Thanks - maybe take your camera to the range when you shoot this next time. I just ordered one of these today - it's a "blem" from PSA - not sure what the blemish is... I guess I'll find out but the price was great. They do state that it is mechanically fine - that's not the blem lol
@johnsheets7261 Жыл бұрын
What you said about the carry having maybe a slightly better trigger than the 3 inch might be true for whatever reason the 3 inch you can find for sometimes 100 cheaper than the 2 even the mrsp on colts websight has the 2 inch 100 more, I just traded in my king cobra 3 and getting a 2 inch and I will be able to compare them as. See for myself
@CobraKaiNoMercy Жыл бұрын
Yup, good luck!
@johnsheets7261 Жыл бұрын
@@CobraKaiNoMercy Just got mine and it does feel better I think than the 3, does yours have a small light gap between the barrel and frame? the one I have has a little light showing between the barrel and frame its a tiny tiny gap though, thanks!
@dvdbiller Жыл бұрын
My brand new 1 had to go back to the factory, light hammer strikes in DA
@billweis60243 жыл бұрын
the colt night cobra grips are slick and too big for my hand. i ordered pachmar rubber grips, they didn't fit. then ordered hogue rubber grips, they fit great and are comfortable for me
@CobraKaiNoMercy3 жыл бұрын
Hogue makes great grips! Glad you like em.
@KatoCoyoteCombatWorkshop3 жыл бұрын
Pachmayr has had a shocking drop in quality control recently, I've had four sets that didn't fit various handguns and customer reviews seem to confirm.
@YABUKIJOE2077 Жыл бұрын
I wouldn’t settle for any revolver if it ain’t Colt
@KiwiMoto722 жыл бұрын
I have the same gun. I love it. It shoots so well. Curious, how do you carry the extra rounds? You have a belt attachment for them?
@jthepickle7 Жыл бұрын
So glad it holds .38 sp as I can't hit anything with the larger round!
@Boot2Ass242 жыл бұрын
I just bought the Colt King Cobra Target, and in my opinion, the Target has a better trigger, more buttery smooth, especially in double action.
@-Cold-World2 жыл бұрын
Looks nice. I would like to get one and a Night Cobra.
@Aleks9x19 Жыл бұрын
Hey, do you know which model HKS speed loader you have? I almost bought one but I’m pretty sure it’s for the older King Cobra.
@CobraKaiNoMercy Жыл бұрын
Yes, its the DS-A
@Aleks9x19 Жыл бұрын
@@CobraKaiNoMercy thank you!
@MW-bi1pi2 жыл бұрын
I think you misspoke on the 2020 Python having a good SA pull and a bad DA pull. My 2020 Python, and every one I ever handled, has a great DA and a real rough SA pull. I sent it to Mike Heffron at Heffron Precision in Iowa and it now has the best DA pull I have ever personally felt, and the SA pull is up there with the best S&W's which is a real accomplishment. Great report on your King Cobra concealed by the way.
@CobraKaiNoMercy2 жыл бұрын
Yeah If I said that I was mistaken. I’ve shot the new Python and it has a great DA pull out of the box.
@jasonvoorhees27013 жыл бұрын
Gorgeous gun ..I found one at my FFL for 950$ I'm seriously considering it ..
@CobraKaiNoMercy3 жыл бұрын
It's a great gun, just make sure you give it a VERY careful lookover. See my first video to know what I'm talking about.
@KatoCoyoteCombatWorkshop2 жыл бұрын
hope you didn't buy it because they go for 740 on GB right now!
@Frugalphilly11 ай бұрын
My local gun store is selling the same gun today for 750.00. But it is a blemish version. Is this a good price??? Brand new
@CobraKaiNoMercy11 ай бұрын
Yeah that’s fair. Palmetto sells blemished models for $699, with transfer fees and background that’s more or less what it would cost. Brand new it’s $899 to $950.
@faithwindsheimer303811 ай бұрын
Does this 2inch cobra come with a fully polished frame and barrel from the factory? Beautiful gun
@Danny19551 Жыл бұрын
I looked at this gun at the gun shop and thinking about putting one in layaway but they also have a 3 inch are you pretty happy with your 2 inch please give me some advice
@CobraKaiNoMercy Жыл бұрын
Hi there, It depends on what you personally want. I picked the 2’, because they didn’t have the 3’ and because I wanted a gun for concealed carry. Now that I’ve owned mine for about two years I wouldn’t trade it for the 3’, I am beyond happy with the 2’, in fact I tried carrying a 1911 compact and went back to the King Cobra because I missed it so much. My advice to you would be to put the one on layaway that you personally like better.
@Danny19551 Жыл бұрын
@@CobraKaiNoMercy Thank you after watching your review and what you’ve told me I think I’m gonna put the 2 inch in layaway little bit easier to carry and just a good looking gun Thanks a lot.
@CobraKaiNoMercy Жыл бұрын
@@Danny19551 Of course. If you need a holster, I can link you the one I use. Good luck! 😎👉🏽👉🏽
@Danny19551 Жыл бұрын
@@CobraKaiNoMercy sure I Love Vedder holsters, but they don’t have anything for this. They have a lot of Smith and Wesson but I’m not sure what to get.
How much bigger than the regular cobra is this? Because the regular cobra is easy to conceal, but if this is the same size I'll go for this one, having a hard te finding the regular 38 cobra locally
@CobraKaiNoMercy2 жыл бұрын
www.coltforum.com/threads/colt-king-cobra-new-vs-old.383410/ There's a few size comparisons here.
@Agent77X Жыл бұрын
Cobra Kai reviews King Cobra!😮
@TheInvincibleArmourАй бұрын
What size speedloaders?
@gun189-f5c2 жыл бұрын
Very nice Gun
@dougiefresh9322 жыл бұрын
I know that edc guns usually have a little wear and tear on them from in and out of the holster, practicing etc. That said this is a really pretty gun, how is the finish holding up?
@CobraKaiNoMercy2 жыл бұрын
Its holding up very well! My holster doesn't seem to be messing with it at all.
@mikediehlman82963 жыл бұрын
Good looking snake
@mr.mullerpaul1050 Жыл бұрын
Is it .357 calibur that right ? Thank you so much. It is very nice revolver ..
@CobraKaiNoMercy Жыл бұрын
Yes
@jeffreyvillarreal9650 Жыл бұрын
Would u ever consider on changing your grips I have the exact same gun
@vicsage832 жыл бұрын
@ Kobra Kai…do you CC any other snubbie revolvers? If so, how does the Cobra compare? Thanks in advance.
@CobraKaiNoMercy2 жыл бұрын
Just the King Cobra. It's very comfortable/easy to carry, to shoot and maintain.
@canale65563 жыл бұрын
Nice video, how much does it weight?
@mx5rcr12 жыл бұрын
I think they’re listed s as 28 ounces for the 3”.
@117rebel2 жыл бұрын
Can it be carried in a pants pocket? Or is it too large for that?
@Jace86373 жыл бұрын
Where can I find a fiber Optic/night vision sight?
@CobraKaiNoMercy3 жыл бұрын
Try Optics Planet
@timwittman2881 Жыл бұрын
How has this been holding up?
@joebom19812 жыл бұрын
I got king Cobra 3" I run a 125 grsin sjhp 357 mag with zeta 6 speed loaders
@leeadams55443 жыл бұрын
Is this the current vintage made in recent years?
@CobraKaiNoMercy3 жыл бұрын
Yes it is! This model was made in November of 2020.
@sarifkelanasarip9963 Жыл бұрын
I want to buy can contact where
@feendog27112 жыл бұрын
how do you carry it?
@CobraKaiNoMercy2 жыл бұрын
I carry it appendix.
@jeromeharrison7450 Жыл бұрын
Do you always use .357 for target practice or .38 special? I read it’s better to use .38 for the range to save wear and tear on the gun.
@CobraKaiNoMercy Жыл бұрын
Yep, I use mostly 38 special at the range and carry 38 special with a speedstrip of .357.
@colinj52913 жыл бұрын
Yours looks shinier than my 3-inch. Did you polish it?
@CobraKaiNoMercy3 жыл бұрын
Hi there, no this is how I bought it.
@colinj52913 жыл бұрын
@@CobraKaiNoMercyProbably just the lighting.
@demo2952 Жыл бұрын
I got a 3 inch sp 101 to eat magnum loads instead
@michaelfiaschetti25742 жыл бұрын
Nice video! I just picked mine up today. Beautiful gun, but I noticed I can see a small amount of light coming through the bottom portion of the barrel and at the top portion of the barrel but not in the middle. Have you noticed this on yours? Thanks p.s. where it meets the frame
@CobraKaiNoMercy2 жыл бұрын
I'm afraid I have no clue what you mean. Can you either be more specific or make a video?
@michaelfiaschetti25742 жыл бұрын
Where the barrel meets the frame , sorry if i didn’t explain it well if you look at the side of where the barrel meets the frame of the gun! If you hold it to the light I can the see the light barely to the other side
@CobraKaiNoMercy2 жыл бұрын
@@michaelfiaschetti2574 I don't see any light when I do what you said.
@michaelfiaschetti25742 жыл бұрын
@@CobraKaiNoMercy take a piece of dental floss and place it between the top of the barrel and the bottom of the barrel and you’ll see what I’m talking about right where it meets the Frame of the gun
@22Phanatic2 жыл бұрын
In case no one has replied, mine has the same gap where the barrel Meets the front of the frame too! Probably due to adjustment of the Barrel to cylinder gap ! I don’t think it’s anything to be concerned Of tho
@rugdman3 жыл бұрын
Nice video man. Wish I could find some 357 to actually take mine out to shoot.
@CobraKaiNoMercy3 жыл бұрын
Thanks Brotha, Our shop just got in a ALOT of ammo, we ordered it last year and it came in on Monday. 😂 I grabbed a few bags of 357, the issue is every 357 is loaded differently, I got some ammo that was loaded for lever actions, and out of my KC it sounded like an explosion went off and it felt like a donkey kicked my hand 😂.
@Jace86373 жыл бұрын
Cheaper than dirt has .357 mag jhp right now.
@christianhardwick65303 жыл бұрын
MIM trigger from what I can tell? What else is MIM ?
@CobraKaiNoMercy3 жыл бұрын
Hammer, Trigger and I think the cylinder release is MIM.
@slickrick4640 Жыл бұрын
What holster do you use for your King Cobra 2” 357 concealed carry ?
@CobraKaiNoMercy Жыл бұрын
Its a 1791 holster, you can buy it from Amazon.
@slickrick4640 Жыл бұрын
@@CobraKaiNoMercy thanks for the info, I haven’t had much luck with leather holsters when it comes to fit….how did you find the fit and retention on this one ?
@CobraKaiNoMercy Жыл бұрын
@@slickrick4640 It’s very good. It wasn’t made for the King Cobra but secures the revolver perfectly and comes out with relative ease.
@ojsimps7012 жыл бұрын
Cobra kai karate mean empty hand no weapon?
@CobraKaiNoMercy2 жыл бұрын
Do you have Netflix?
@misssassycompany9950 Жыл бұрын
How’s the da trigger pull?
@CobraKaiNoMercy Жыл бұрын
Its somewhere between 6-8 pounds. It’s very nice!
@misssassycompany9950 Жыл бұрын
@@CobraKaiNoMercy will this be a good first revolver?
@CobraKaiNoMercy Жыл бұрын
@@misssassycompany9950 Yes I think so
@misssassycompany9950 Жыл бұрын
@@CobraKaiNoMercy ok thanks for the info. By the way, does it need a trigger job or the stock trigger will do?
@CobraKaiNoMercy Жыл бұрын
@@misssassycompany9950 The stock trigger is fine in my opinion.
@jhinto56573 жыл бұрын
What holster did you find to fit it?
@CobraKaiNoMercy3 жыл бұрын
I bought a 1791 Holster from Amazon. I can make a video if you like as I got new grips for the gun and a video for that is in the works.
@jhinto56573 жыл бұрын
@@CobraKaiNoMercy Please do. That's actually one I've been looking into.
@chrismagnum063 жыл бұрын
I have the 4 inch model purchased a month ago brand new and can't figure out what holster it will fit in.i like the galco sr46b but the description says pre 2019 colt king cobra.Just learned its a D frame which made my search a little more difficult.any ideas for a newb in our King Cobra Clan?thanx a bunch.
@CobraKaiNoMercy3 жыл бұрын
@@chrismagnum06 I'll make a video.
@chrismagnum063 жыл бұрын
@@CobraKaiNoMercy thank you.love your name btw.
@noelvelez410 Жыл бұрын
PRICE $1,200.00
@kendric983 жыл бұрын
My 3" comes in monday.
@CobraKaiNoMercy3 жыл бұрын
Hopefully the background doesn't take too long 🤙🏽. Enjoy your KC.
@kakusei36723 жыл бұрын
How did yours turn out
@kendric983 жыл бұрын
@@CobraKaiNoMercy in and out in ohio easy peesy.
@kendric983 жыл бұрын
@@kakusei3672 fantastic, i shot a 1 inch group with 38spc at 7 yards today.
@CobraKaiNoMercy3 жыл бұрын
@@kendric98 Did you shoot the gun DA or SA? I need to tighten my shot group with DA, but I usually have an itchier trigger finger with DA.
@Desperado3248 Жыл бұрын
Dry firing without snap caps can damage or break the firing pin
@CobraKaiNoMercy Жыл бұрын
This isnt a .22 revolver my guy…
@wooddawg486810 ай бұрын
Nice pistol/revolver but the price is not worth the name hype.
@michaelapostol3621 Жыл бұрын
You sound like Billy Crystal. 😂😂
@leehannaford9166 Жыл бұрын
😘nice 👍
@Blando78873 жыл бұрын
Its purdy
@ironjohn59142 жыл бұрын
I want that~
@ronaldlucero42582 жыл бұрын
Work don't fix .
@CobraKaiNoMercy2 жыл бұрын
Eh?
@valentinocabrera89613 жыл бұрын
I put 20 rounds of underwood 125 grain hollow points through my brand new 3 inch version Colt king Cobra. On the 21st round the transfer bar broke. I’m sending it in to be fixed. When it comes back I’ll go out and shoot the same ammo and see what happens. I’m going to put this gun through the ringer before the one year warranty expires. I don’t think this gun will handle a steady diet of high pressure rounds. We’ll see.
@CobraKaiNoMercy3 жыл бұрын
Is your KC the 2019 model?
@valentinocabrera89613 жыл бұрын
@@CobraKaiNoMercy yes
@Airplanetyson2 жыл бұрын
@@valentinocabrera8961 that explains it all
@CobraKaiNoMercy2 жыл бұрын
@@Airplanetyson Unfortunately your assertion is correct.
@jackhouck2687 Жыл бұрын
Look over your gun before you buy. Why by something you haven't
@CobraKaiNoMercy Жыл бұрын
Tell that to this guy: kzbin.info/www/bejne/anPSl6mMpsd6osk
@jackhouck2687 Жыл бұрын
@@CobraKaiNoMercy my Cobra is exceptional, i looked it ovet it's a teal eye catcher put together great
@juhyokang2571 Жыл бұрын
Okon
@johnstockton81382 жыл бұрын
You should have got the 3 in, the 38 and 357 ballistics is where it is most effective, for a conceal carry. It is the Goldilocks barrel length for conceal carry 357 mag revolvers, that extra barrel inch is not much as the rest of the gun is the same. I use a craft holster ankle holster specially talored for the the 3 in and can conceal very well. 357 mag and 38 are not good in snubies, you get worse ballistics along with worse handling, the 3 in is just right in terms of ballistics, handling balance, and concealability. Before the FBI moved over to semi-auto pistols, they determined that a 3 inch 357 mag revolver was the best conceal carry field gun. The perfect caliber for snubies (2 inch or less) is the 32 sw long and 327 fed magnum, like the 327 fed magnum lcr ruger makes. None of the other snubies are worth it, 22LR 22 magnum and 9mm snubby has reliability issues, the 357 mag ballistics is wasted in a snub and it is hard to handle to shoot well with it, 38 special is probably the 2nd best caliber for snubies after 32 caliber but just getting a gun that only shoots 38 spl but not 357 seems like a waste. Therefore, the 327 fed magnum lcr from ruger is the only snubby worth getting.
@CobraKaiNoMercy2 жыл бұрын
They didn't have the 3' when I bought this one.
@johnstockton81382 жыл бұрын
@@CobraKaiNoMercy the 2 inch king cobra is still a worthy carry and conceals better than the 3 inch. The 2 inch king cobra just take more skills to get the same accuracy performance as the 3 in and above. Though the 3 inch will have better ballistics, the ballistics of the 2in king cobra is more than satisfactory for what your intended purpose is with the gun, it is no weak sauce that is for sure, and depending on the type of ammo you use the difference in ballistics become irrelevant for your needs. On another note, you should check out the sig sauer p238 chambered in 380 acp. One of the best ankle conceal carry for semi auto pistols. The size and print of that thing is incredible. And quality self-defense rounds of 380 acp out in the market rivals the 38 special.
@CobraKaiNoMercy2 жыл бұрын
@@johnstockton8138 Thanks for your response, I carry both Remington Golden Sabers and Speer Gold Dot "Short Barrel Load" both in 357. I agree that the 3' has better ballistics, but like I said when I went to buy it, they only had the conceal carry and target model.
@FelipeSantos-rb8ue Жыл бұрын
Ter uma arma e nem querer encostar a mão nela é muita frescura, só pega com paninho seu fresco
@CobraKaiNoMercy Жыл бұрын
Yo use un paño para el video nada mas. Yo no estoy tan preocupado con huellas digitales.
@davehill81386 ай бұрын
Don’t buy this gun. Mine almost killed me twice when it broke. It broke twice in less than 6 months. It looks great. But is mechanically a train wreak
@donaldmyck42962 жыл бұрын
I have two Pythons, a 3 inch and a 6 inch. Don't really care for the looks of the King Cobra
@mericaeagle93192 жыл бұрын
Wish my night cobra wasn't absolute trash
@LEXxTALIONS7913 Жыл бұрын
Yes is a gorgeous gun, but I'm a S&W revolver collector so I like more S&W revolvers, but saying that I really like to buy a Colt revolver, but I want a Colt python but the older model, even my S&W revolvers the most recent I own is from 1997, I only buy S&W revolvers made before 1999, after that year I have 0 intresse! The most recent revolver I own that isn't a S&W was a gift that my wife bought me was my "new" Manurhin MR 73 from 2010, and is a dream to shoot! My EDC is my first S&W revolver that I own since I was a kid (was from my father), and in 25 years of use in my hands already save my life 2 times! So I really get angry when I see retarded people saying that revolvers are obsolete!!! To those people who need 30 rounds to end a treat maybe is better buy a belt feed machine gun!!! Or a rocket launcher! If you don't have aim dosen't matter who many bullets you have in your gun!!!