Command Task 3d (1) SSB GTO structures in 3d | SSB GTO obstacles and structures with solutions tricks
Пікірлер: 53
@iTsRko_27 күн бұрын
Wow very helpful sir 🫡 go ahead you are doing fantastic work ❤️
@parthchaturvedi8614Ай бұрын
Hi bhaiya I got one idea for 3rd one You can make a loop in the shape of 8 between 2 poles and use center part as the base for the plank however a bit risky as the ropes to be tied tight
@harshitmehrolia2701Ай бұрын
Great idea brother But placing the rear end of the plank under the cross junction of the rope will make the rope slide up on the rear pole.
@PATELDISHANKBCY11 күн бұрын
Sir in T3, we can only use smaller pole as if place the plank on top same as you did, but instead of tying rope on bigger pole we can tie one end to left end of balli and place balli as 90(horizontal to ground) with the pole just ahead of balli. Tie other end of rope over the plank to the other end of balli. Tie very hard all stuff and the pole will not allow the balli to move back and so not allow plank to lift from backwards. And so will be a stable solution
@dreamArmy345 ай бұрын
This software is so good! Please make more videos it has really helped me in understanding 🙏
@PawanKumar-ep9ih4 ай бұрын
which software is this?
@kusumlatayadav71215 ай бұрын
awesome and lucid please make more videos
@HarshDahiya-r2pАй бұрын
T3 me Balli ko neeche diagonally bhi laga sakte hai, for added support...
@muruganraja902 ай бұрын
Great effort 👍
@bipinkarki58836 ай бұрын
Pl come with more videos
@sachinmourya91924 ай бұрын
in the last task i have an idea > as we are given two poles one balli and patta and rassi so 1. tie the balli in the bigger pole horizontally tightly from the inner side 2. now put the plank on the small pole and the plank one end below the balli which we have tied earlier hope this is good idea for it because as you explained in the video and the idea given is difficult to tie the plank to that pole
@user-rf6yu4sb1s4 ай бұрын
may not be stable!
@mohitparmar27952 ай бұрын
It's workable, but there is no significant use of balli, like we are using the same plan as before but only using additional balli which have no significance and it makes a simple idea more complex
@armykid.4 ай бұрын
You done a good job
@savitritiwari22113 ай бұрын
Please make more video on defferent defferent ssb task
@shubhampawarofficial10026 ай бұрын
awesome bro keep doing it
@Neha10212 Жыл бұрын
Sir please upload such videos on movable structures also...
@GTOtasks3d6 ай бұрын
Brother abhi sir Navy main hai ❤
@akashsingh86085 ай бұрын
Awesome bhai
@ayushmathur59845 ай бұрын
In 2 structure put plank under l projection and put plank on the top side of l projection
@vijayakumarT.6 ай бұрын
You made really grt thing
@salahuddinayyubi8272Ай бұрын
Please upload more videos
@amansinghsurdyal19997 ай бұрын
Sir third structure mai Bali or rassi k sath T shape bnaa skte hai jo plank ko stable rkhe ga upr sa
@GTOtasks3d6 ай бұрын
Brother abhi wo Navy main hai ❤
@arjundeva60585 ай бұрын
Love ❤❤❤❤❤❤
@narayanlohiya82262 ай бұрын
Pls upload more videos
@pushpendrasinghparihar17124 ай бұрын
Or banao bhai
@Dev_07_Vlogs5 ай бұрын
Please come with more videos
@akshanshkhokhar22727 ай бұрын
Sir in the very last structure, we can use the smaller pole as the base for the plank and the balli can be used to press the plank when a person will move over it. What I mean is that the balli will be kept parallel to the bigger pole and put perpendicular on the plank like this ' I_____' one person or two people can press the balli firmly when one perspn is crossing over the plank.
@GTOtasks3d6 ай бұрын
Brother abhi sir Navy main hai ❤
@akshanshkhokhar22726 ай бұрын
@@GTOtasks3d please convey my best regards to sir. This video helped me a lot in my recent SSB and even I got recommended recently for Army.
@RMate-bu7se3 ай бұрын
@@akshanshkhokhar2272 Did you take any coaching?
@dream43453 ай бұрын
U r doing so well, then why quit?
@SmritiSharma-pp4hl9 ай бұрын
Please upload more sir it's helpful
@GTOtasks3d6 ай бұрын
Brother abhi sir Navy main hai ❤
@rajmanoj61005 ай бұрын
Hello sir command task ke liye bhi video bana doo
@rajanarya51053 ай бұрын
Add more videos
@prathameshnawale9273 Жыл бұрын
Very helpful
@GTOtasks3d6 ай бұрын
Brother abhi sir Navy main hai ❤
@tangocharlie6577 Жыл бұрын
bhaaai ji aur video upload karo aise hi please
@tangocharlie6577 Жыл бұрын
Bhai please layiye aise 3d models very very helpful