Commercial Work in Norway! 🇳🇴 |ØY25

[@helgiheidars]

The Norwegian / Icelandic electrician here! 👋 Cory, Thanks for spending the day with me. It was a lot of fun. Hope that we can repeat this... ☺ Just a note on the mistake on my part. The cables that needed to be rerouted were not the right cables mentioned in the video. I misread notes in the report and fixed right cables afterwards. 😅

[@Deiphobuzz]

Cool to take a look at my northern neighbours, NL here. Your wholesaler looks exactly the same as ours, with the scanning etc, ours is just not open 24/7. Your installs also look pretty much the same. Do you have 3 phases a lot in domestic properties aswel?

[@helgiheidars]

@@Deiphobuzz I see more 3 phases connected then 1 (400V TN) or 2 (230V IT) phase in domestic properties.

[@Deiphobuzz]

@@helgiheidars Cool, its mostly TT here. Country looks amazing aswell. Wanted to go this summer but the new ferryline from NL to Norway got cancelled :-(

[@janholland2224]

Well, at least in this episode an Apprentice didn't get fired ...

[@Bladerunner264]

Honest on social media. Absolute gentleman

[@mrbugenhagen3364]

If anyone is interseted, phase reversal would make a motor go backwards normally but nowadays everything over 5kW is controlled by a VFD and it doesn´t matter if you reverse the phases into the VFD. You would have to switch the phases going out of the VFD or change the settings in the VFD to change the direction of the motor.

[@marktubeie07]

Congrats on the Visa issue Cory - happy it's all sorted out for both of you mate !

[@corymac]

Much appreciated!

[@brogiesthemotorcyclist5408]

Hi Cory, phase rotation - well yes. Many moons ago I was working on a farm slurry pump and yes you guessed it, the phase rotation was out of sync and - boom it blew instead of sucking. The result was not pretty and my boss and the farmer got covered, kept my job but only just !!!!

[@corymac]

🤣🤣🤣

[@justme5384]

@ 10:18 the phase sequence should still be correct since it's now L2-L3-L1 so it's just off by one

[@ajlaidler67]

omg, just got chills, you are fishing at Hinnavagen, I had a summer job over my O and A level years (about 40 years ago) with Norwegian Contractors who slip formed the rather impressive sloping structure in the back ground. Love Norway, beautiful place fab people

[@corymac]

So cool!

[@thomjak86]

So strange, i was over at Artisan Electrics watching old videos and startet watching the episode where Cory "quit". Started reading comments and found my way to this video since im from Norway. So wierd that this video was dropped 1 hour ago.

[@corymac]

Welcome to the future 🤩

[@IanFarquharson2]

Nice day out on the tools. Imagine what would happen in a 24h self-service screwfix here 😮 the Norwegian one must be like a private members club to get access.

[@corymac]

Itd be emptied in a week 😅😅

[@tommahoney7940]

Boom on the Visa issue,really happy for ya,absolutely quality video as always,from Artisan which are great as well,to watching you in what seems to be you in your element.Complete new way of watching a quality spark doing his stuff,look forward to the next video.All the best mate.

[@corymac]

Glad you like them! Thanks for watching

[@smoggydrones5664]

As a DIYer and looking from the outside in I do agree about wiring under floorboards fuel for the fire. I love cable trays and should be used in lofts so all cable above insulation. Tough if this is more expensive. What price safety. Kinetic switches should now be used in all rooms even the bathroom as I have done. Great video seeing how others work. I hope their tradesmen are better than ours.

[@TradifyHQ]

Great that Tradify helps you to work from anywhere in the world! Congratulations with the visa!

[@corymac]

Thankyou!!

[@kristiangoransson6104]

Changing the phases can be hazardous. I had a conversation about that today and he mentioned a solar company that tried to do the customer a favor by swapping the three phase to brown, black, grey. They had to pay ~10.000€ for the repairs to feeding systems etc.

[@jim575757]

If a motor starts spinning the other way round this can cause alot of damage. Usually the rotation is changed in a location with a seal here in The Netherlands.

[@kristiangoransson6104]

@@jim575757 I prefer to switch the phases on the actual motor connections to maintain the proper phase sequence as far as possible in the installation. Using hybrid motor starters and frequency converters are really convenient though

[@mjtaber1974]

Norway didn’t sell off their north seal oil and gas and so they invested and have one of the largest sovereign wealth funds in the world. That has trickled down to all aspects of Norwegian life. It’s fantastic.

[@jim575757]

Unfortunately in The Netherlands we put all our gas money on Red. Now it's all evaporated and the only thing we have left is a couple of railroads.

[@3dxyz412]

​@@jim575757i think european are too obsessed with renewables / clean energy without realizing that in order to achieve those, you are going to pollute other third world country and reaping fat benefits from it, famously nigeria where the pride of your country (shell) being doing its dirty works for decades.

[@i_know_youre_right_but]

@@jim575757really? I was in the Netherlands not long ago and it seemed like a decent place to live.

[@66666lambofgod]

Whatever you do, just don’t come to England. We are the stupidest country in the world who sold its own water !! How crazy is that , who sells its own water?! All it’s left to sell in here is oxygen….

[@Stuart_Johnson_Solutions]

Congratulations! Hopefully I will get chance to meet you both on your return!

[@ForTheBirbs]

Awesome news on the visa Cory! 🎉😊❤. Woo hoo! And another fantastic video.

[@corymac]

Thank you! 😃

[@Mixolixplosion]

Why a visa is needed?

[@Richardincancale]

Well done on the visa! I read today about someone trying to get a visa for their child, waited 2 years - no response - even when lawyers tried. Journalist intervened and mysteriously completed the next day!

[@corymac]

It’s madness

[@williamlowther7051]

Enjoyed the vid, hope the free ice cream catches on in the UK

[@corymac]

I hope so too!

[@connordines667]

Great video! Nice new Milwaukee tools that look very Similar to Bosch 12v range 😂😂 defo wish we had that sort wholesaler setup in the UK

[@Recessio]

Great video, it's super interesting to see the differences. Really wish we used conduit as standard in the UK...

[@corymac]

Thanks for watching!

[@Mixolixplosion]

Singles in conduits? Nah, nym cables like in Germany are better.

[@tommymack3210]

Berggård Amundsen is the best wholesaler. Very nice in Stavanger :)

[@maygarland6123]

I think your electrician said he couldnt believe we put cables under floorboards, why would that be considered a bad thing? Congratulations on happy wife sitch

[@geoffupton]

maybe the heat generated by overloaded cables? maybe they trunk everything into walls/ceilings? maybe they know something we dont? 😂 seriously though, good question!

[@corymac]

It’s the inconvenience of future maintenance, and also perceived lack of protection

[@JensenPGATourDriven]

Really enjoying watching & learning from you Cory , I really like the plastic covers Idea , All the best to both of you getting back to the uk 🏴󠁧󠁢󠁥󠁮󠁧󠁿 ⚡️👊

[@corymac]

Thanks!! 👍

You put the screwdriver in the 8 but you picked it up out of the 9 😂

[@corymac]

Chaos is my middle name

[@NickP1707]

I’m well impressed with the access all hours wholesalers. Very efficient hassle free

[@corymac]

Me too!

[@helgiheidars]

and there is pancakes and jam on fridays.... 😋

[@danielbaker1852]

Phases can be swapped numerous times across the network so long as done in pairs, changing the direction of the magnetic field.

[@lewis94uk]

That Grey phase is looking a bit toasty

[@tomjones3935]

"Mega powerful wee" got me in tears 😂

[@Simondofficial]

first! Thanks for the uploaded cannot wait to watch

[@corymac]

Thank you for watching!!!

[@markplumber3635]

Thanks for the plumbing insight 🎉

[@corymac]

Our pleasure!

[@Deiphobuzz]

I use the christmas light tube version, perfect for working in crawlspaces.

[@corymac]

Super smart

[@4211234]

we need more Cory in Norway!

[@timahad5165]

He looks thrilled to be working with you😂

[@corymac]

😂😂

[@helgiheidars]

I was, the most fun workday in a long time.... 😂

[@112Haribo]

Beautiful word, Rørlegger. Means literally 'pipe-layer'.

[@GoGreenAutos]

Wow, love the wholesalers. Would love to have hands-on access to the products and tools. Would probably buy a lot more than I needed though.

[@corymac]

You and me both!

[@itsnotagsxr4053]

This is totally not important hit you were half right about the large 3 phase fans used in industry settings. Get a phase out and it will run backward however the majority of dust extraction fans are centrifugal and will always extract. If they run in the wrong orientation the velocity will be significantly reduced (I’ve found typically 1/3rd of the velocity). Like I said, not important but the more you know.

[@MrToyorick]

You need to do get together with Svanströms in sweden 😁 , they run a youtube channel to ,

[@electrician247]

really interesting video, enjoyed that fellas!

[@corymac]

Much appreciated!

[@helgiheidars]

Gald that you enjoyd it.... 🙂

[@brendanfisher2528]

I had tradify. And it seemed to indepth and complicated for what I needed. Maybe if i wasn't stuck in my ways of what I already use then i might have gave it more time.

[@corymac]

I guess it depends on what you need and do

[@craig8662]

In South Africa all wiring is conduited. My house has metal conduit earthed at the meter box. Seen many UK installs where the rodents eat the T&E in the roof space etc... Come on UK .. get with the program... not FlexiCon but rigid conduit when re-wiring.. and none of this capping malarkey LOL

[@martinhansen6802]

GoFundMe petition so Cory can get a 1000v 2.5x165mm PB Swisstool screwdriver ;)

[@corymac]

🤣🤣🤣

[@barteklewandowski4211]

Milwaukee tape had me laughing out loud

[@MadSpacePig]

17:50 You DID NOT just take that screwdriver out of the 9 hole and then put it back in the 8 hole. SHAME.

[@corymac]

🤣🤣😂

[@lappfjard]

Earthbonding the cabletray, that was wrong in so many ways. 😊

[@corymac]

Explain how

[@ettselectricalservices9428]

If the tray is an exposed conductive part it requires earthing. If the tray is and extraneous conductive part it requires bonding. If the tray is neither of the above it requires neither earthing nor bonding.

[@niklaseklund88]

Loving it! Keep up the great videos.

[@corymac]

Appreciate it!

[@mydogpeaches1]

i love norway given the opportunity i would move there very quickly as my family is there

[@corymac]

I love it too!

[@edc1569]

I wonder how the price of parts at the wholesaler compares to the UK, seems like they might have some decent margins!

[@baahwoop]

Your Norwegian sounds Swiss 😄 🇧🇻🇨🇭

[@corymac]

😂

[@corymac]

It’s Stavanger Norsk!!

[@baahwoop]

🤣

[@Deiphobuzz]

Why would you put a C for a car charger? There is no motor or something to cause a big inrush current. Type B trips at 3 to 5x nominal. At c63A, it will never rush in 250 A for a charger.

[@corymac]

It’s not one charger, it’s a whole car park full of them, and it was blowing the type B on start up.

[@Deiphobuzz]

@@corymac was the type B tested afterwards? That should never happen.

[@jim575757]

@@Deiphobuzz not sure though if it's an good idea to put an entire car park of chargers on one B63A.

[@JussiPeltola]

It is the same for sockets, fitting B breakers will result in nuisance trips after a power cut or brownout when a bunch of switching supplies are plugged in. Unless your loop impedance is poor enough to require B, it is much better to just have C everywhere. In Finland the pre-made boards usually have a random assortment of B and C. If you are lucky they wired the cooker and sauna into the B16's and your sockets into a C16. Otherwise you will have nuisance trips.

[@M0PAX]

Congratulations on the visa

[@corymac]

Thanks! 😃

[@Chem-iu5jx]

What electrical wholesaler was that?

[@pauljames4498]

Love watching

[@stephencarter6634]

Fascinating video, always interesting to see the differences between countries 👍 Great news on the Visa 😊👍 Welcome home to Dorset

[@corymac]

Thanks! 😃

[@Deiphobuzz]

Domestic in NL is also 3phase mostly btw :D

[@Ragnar8504]

Having watched a few NL spark videos I was surprised to see that the three phase usually seems to go into three double-pole RCDs in new boards, which then feed a group of MCBs each through L+N bus bars, rather than one or two four-pole RCDs with 3L+N bus bars to the MCBs. Also interesting to see that old Diazed fuse boards had a switch for each circuit after the fuse.

[@johankorten2797]

In the NL in domestic single-phase they apparently solve it by calculating housenemer modulo 3 and then the installer (grid supplier) knows which phase to connect in the particular house. Nice job and great video Cory. (I would use flexcon next time at 30:44 to protect the earth wire a little better).

[@Faddnn]

Phase colors used to be black, grey and brown back in the days in Norway. Now it is black, brow and grey.

[@corymac]

That’s not half confusing 😂

[@JussiPeltola]

Sometimes they are rotated on purpose, for example in apartment 1 you have 123, in apartment 2 you have 231, in 3 you have 312, and when the installations in the apartments are clones of each other, you end up with balanced phases. Obviously you keep the rotation correct. It doesn't make much sense in the input of a large distribution board though, unless the building has 3 or more large boards.

[@tinkrizmanic2747]

Sandals on site? No s3 protection laws in norway?

[@callumsimpson7483]

The first 35 seconds are funny af 😂😂😂

[@davenz000]

Chnt breakers. Those are infiltrating everywhere.

[@lloydbatkin1452]

Please get me a wholesalers like that in the UK!!!!!!!

[@samparsons5580]

Such a long blink. Has his eyes closed for half the video 😂

[@corymac]

😆😆🤣

[@helgiheidars]

Yeah, I do that sometimes when I need to focus. Like I am talking english as that is not my first language 🤔

[@scottsparky1]

do they not have to use metal clips on that conduit like we do in the uk, incase of fire

[@corymac]

Apparently not! 😃

[@lappfjard]

Why do you need protection > inside < the electrical cabin?

[@persona250]

So it can be worked on without turning power off .

[@corymac]

What he said ⬆️

[@DelBouy-lc5wx]

Good news on the visa. You been up Pulpit rock yet? Amazing views.

[@corymac]

Thanks mate! Yes, been there, very nice 👍🏼

[@HeathenGeek]

is there a minimum spec for the Perspex that's supposed to be used on the flash covers?

[@helgiheidars]

I order this flash cover from electrical imports wholesaler, it was 1m x 1m x 3mm and cost around £150.

[@cjkokay]

I am disappointed. The first cover was seriously under sized. Why not the correct cover from the manufacturer or fully plate correctly.

[@corymac]

It must be camera angles mate, all is covered and photographed for their paperwork and I’ve double checked and looks fine. Had to be fabricated as it wasn’t possible to purchase there anymore

[@mick1598]

Work to live not live to work 👍

[@corymac]

Couldn’t agree more

[@mick1598]

@@corymac that’s our Aussie philosophy to work life balance anyway mate, great vids 👍

[@mlies37]

16:30 are ferrules not required over there for stranded wire?

[@corymac]

Required only for soft stranded as per manufacturer ( draka ) guidelines, same as here

[@Mixolixplosion]

​@@corymac Are they Class 2 conductors?

[@ELVSystems]

Mind also blown by the wholesaler. Still don't like the european way of conduit bends and congratulations on the Visa.

[@corymac]

Thanks a lot 🙂👍

[@4211234]

oooh noo! im stuck in norway oh no heelp meee.

[@martinbateman2467]

Another top video

[@corymac]

Glad you enjoyed it

[@jorgebravo415]

Flink elektriker,Hilsen fra Chile ⚡⚡⚡

[@toms7431]

Swiss tools are the best.

[@corymac]

I’ve not tried them yet. They felt good though!

[@frozendude707]

Pro tip, do not fish for food near marinas, the fish there tend to have much higher levels of harmful substances. The worst short term effect I have heard of from eating such fish is partial temporary paralysis, but still, the long term risks might not be worth it.

[@keithmclean3151]

Where in Norway are you?

[@corymac]

This was the west coast, Stavanger

[@keithmclean3151]

I thought I recognised the place. I get over there quite often. Surprised that you don't want to settle there, however it might be a bit too quiet for you and hinder your rise to Stardom 🙂. Keep spreading the electrical word for the world wide sparkies. 🙂

[@hoopz954]

Are you Norwegian Cory???

[@corymac]

I’m not, my wife is though!

[@Iftikharchef-r9x]

Brother plea job problem ,ansar me

[@eamonnohalloran2254]

Cory showed us his Ice cream face .Just one cornetto !!!!! and a brain Freeze? A lot of exposed bussing, ?? Seems like manufacturer would have made panels to cover these originally .Gerry rigging perspex covers although they work and are non conductive .You seemed to instal by drilling in to the face of some of the breakers. which. should there be any future accident would void the manufacturers warrenty. Silence work around exposed bussing no chatter!!!! no more than one person in the space at the time no exposed skin either arms of legs !!! PPE cause there are no second chances. You are waring your wedding ring!!!!!! Love the fact that your wife's visa issues are resolved. But watch out .Rishi Sunach wont allow you cross the sea by boat. Tell that to the Vikings.

[@corymac]

Hey mate 🍦 - no breakers were harmed in the making of this video… they have the screw threads built into them by design. And it’s not Perspex but actually a materials designed for fire proof flash guards

[@eamonnohalloran2254]

@@corymac thanks Cory for the clarification. Hope you have made the sea crossing safely with you wife. I can see you now recreating the landing of the Vikings at Lindisfarne as your journey south to the Dorset Coast practicing your many dialects and checking your shorts and hoping for waves on your arrival.

[@MrCarnivoure]

What do you mean u stuck in Norway? 😂 be careful what u saying so u don't hurt your hosts. If you don't like there , leave. Mind u , you are lucky most Scandinavians speak good English

[@corymac]

I was stuck for two months whilst waiting for my Norwegian wife’s English visa. Fortunately I speak Norwegian and happen to also love the country

[@Mixolixplosion]

Your wife visa needs a visa to live in the UK 🤔 You are married to a foreigner?

[@corymac]

Married to a Norwegian 🇳🇴 👍🏼

[@tooljourney]

visit NL

[@corymac]

I’d love to

[@michaellowery1559]

SS NORWAY😀