This happened to me once before, i think it's to do with voltage I had a faulty plug extender so I plugged it into the mains or another one and it worked when I pressed the on button on the remote.
@isabellesiva37785 жыл бұрын
Liam do you think I should buy an adapter?
@Liam-yy9ll5 жыл бұрын
@@isabellesiva3778 I am not an expert at this stuff however as the person at the top said how his won't turn on I tried plugging mine into a new extension cable or wall power which worked when I pressed the on button on the remote. If this is happening to you I would suggest you check the voltage conversion sheet you may get in packaging and check how many inputs you are putting into the lights. *If the voltage is correct I suggest you take a look on the adapter and see if you can find a model number then order it online.* Alot of these manufacturers make very cheap parts that mess up my brother had one of these led strip lights and the infra red sensor didn't work but when i plugged mine into his it worked.
@allisonnewsome9344 жыл бұрын
Mine won’t either
@layla-td1rv4 жыл бұрын
You’re remote could be broken that happens to me so I bought a new one
@spotsnwrinkles77964 жыл бұрын
Grey sweater dude looks like the goodmythical morning guy
@tomzidahmed33004 жыл бұрын
He is called Rhett
@tattannaknight21934 жыл бұрын
spots n'wrinkles sounds like him too
@tylerhodge65974 жыл бұрын
I thought the same thing 😂
@angelahaina91535 жыл бұрын
My lights were working for 3 straight days and then suddenly they stopped working 😭😭 idk what to dooooo I need help
@natis7275 жыл бұрын
Same !!!!
@joukosaatana5 жыл бұрын
Yuh, same
@juancoronado58345 жыл бұрын
Me to
@Liam-yy9ll5 жыл бұрын
Alot of you seem to be having the same issues in what way have they stopped working? Do they not turn on? I've had some problems in the past which I found out how to fix so maybe I can help. But quick disclaimer I'm not an expert.
@yvng.anthony27045 жыл бұрын
Liam mine don’t turn on nd i connected nd discontented it but i got them from walmart nd had them for 1-2 yeRs now and they stopped working out of no where nd i’m freaking out because i have no light to see nd all that
@TLoDrop5 жыл бұрын
my LED lights turned off completely and when i turn it off and on, the light just flashes. please help
@Liam-yy9ll5 жыл бұрын
You either pressed the strobe light function on the remote if there is one or it generally is a problem with the connection or power going to the lights check the plug and wires.
@minionssupercool8735 жыл бұрын
@@Liam-yy9ll oh my god you helped me. I did the exact same thing oh my god thank you lmaoo
@Liam-yy9ll5 жыл бұрын
@@minionssupercool873 I'm not even an expert on this I surprised that actually worked I'm glad I could help I guess haha.
@serena87984 жыл бұрын
Liam where’s the strobe light function on the remote?
@serena87984 жыл бұрын
ClickBayt Queen what did you do?
@BunnyMilky-nf1yt4 жыл бұрын
only one side of my led light strips are working it’s so annoying!
@rxycq26284 жыл бұрын
Bunny.Milky same here
@rianne86614 жыл бұрын
Sameeeeee
@lydiawitnaigoonlaud44334 жыл бұрын
did you ever figure it out?
@linajones35654 жыл бұрын
OKAY! So I just had this problem and you need to play with the remotes and spam them. So basically just spam the on and off button and it should work. I just did it and it worked
@thelifeofveah28154 жыл бұрын
Same
@caspianarrow91795 жыл бұрын
I just got my led lights last week in the mail and there not working😣
@debszz4154 жыл бұрын
Bliss Jackson same I got it today !!! Nailed it in my wall and now it isn’t working
@brooklyntran79974 жыл бұрын
Debszz you nailed it??
@debszz4154 жыл бұрын
limbo yh it’s not the sticker one it’s the one u nail on
@brooklyntran79974 жыл бұрын
Debszz OH
@debszz4154 жыл бұрын
limbo I’m deaad 😂😂
@101FineMan5 жыл бұрын
Mine won’t turn blue, when I press blue on the remote, it turns off.
@jejjoopzs66265 жыл бұрын
Yee Bears same but mine won’t turn red
@101FineMan4 жыл бұрын
Menuka Edits so I figured it out. You know the four wires and the start of the strip? Your red one might be detached from the strip
@drewysiv37924 жыл бұрын
Yee Bears but how would i fix my entire strip working except for one light being green when i choose blue? literally just one light?
@drewysiv37924 жыл бұрын
Breeze well to be honest since it was one light and i couldn’t figure it out, i just covered it with black tape and since my strip is so big i can’t even tell the difference, lol. sorry!
@aashansohail39503 жыл бұрын
My blue isnt working samee
@jeanviloria19885 жыл бұрын
I just got these lights and it was working fine until I woke up today and only have of the strip worked. I'm really sad because you can tell that something is wrong
@polarni86634 жыл бұрын
Same idk why
@pokel.e.d64314 жыл бұрын
Please tell me when you find what’s wrong
@Ralfie264 жыл бұрын
same idk why and i had just gotten them if you find the problem plz tell us
@plskindlyhelpmehit5ksubswi7174 жыл бұрын
Same that happened to mine too
@aidacardenas68504 жыл бұрын
@Safa Ahmed did you fix them?
@daultonlitteral31435 жыл бұрын
When i turn mine on they light up white and wont change colors or work with the remote. I bought 2 sets and both are doing this.
@heatherfowler94024 жыл бұрын
What did you do to fix it
@joejenkinson4 жыл бұрын
Heather Fowler hi mine were doing the same thing you can do 2 things, either contact the company or you need to check the connection. If neither of those work try lightly pressing the led bulbs.
@tetanus23924 жыл бұрын
You need a special battery.
@dennissesaunders23823 жыл бұрын
Mines are doing the exact thing
@lilpunch28433 жыл бұрын
so my issue is that my led strips won’t fit into the connector thing and i’m trying everythung and my fingers are now abused for hours of trying to fit them in.
@eelo8105 жыл бұрын
I was re adjusting mine one day and then they started flicking while I was adjusting them and they haven’t turned on Sense what do I do?
@debszz4154 жыл бұрын
_. eelo omg same
@eelo8104 жыл бұрын
Debs The Gamer I figured out how to make them work again what ever you do DONT CUT them just re plug them in hope it works for you:)
@johnnyt3814 жыл бұрын
Mine are 2 differnt colors😂😂
@lanthony90833 жыл бұрын
@@eelo810 So I outlined this metal ship and everything works great. I have them plugged in so where i was setting up I cld figure out the problem if they were went out, but they didn't. Should I just leave as is and not try to cut them bc I can just tape where I finished up.. Wish I can send a pix. If ppl just lit them as they were going along and the lights went out. Then that's were the problem is. Oh, If I don't cut them either then I will cut where the next when I use them for another project. Hope this sounds right.
@ksvrp4 жыл бұрын
i had mine for 1-2 months already and they worked fine but i tried to move the adapter a little and the whole thing turned off and the green light isn’t even on somebody please help😔
@norasama6134 жыл бұрын
I have the same problem 😭 did u find a solution???
@xoxoxo30444 жыл бұрын
Nora Sama same
@debszz4154 жыл бұрын
My led lights are protected so I can’t do all this , but I literally got my light today and I stuck them on my wall when I was done I wanted to test them out , they didn’t work
@iighostnova4 жыл бұрын
Debszz flip the little plugs
@debszz4154 жыл бұрын
DrinYi lol it’s fixed dw
@jade-cn6ec4 жыл бұрын
Debszz how did u fix them?
@debszz4154 жыл бұрын
8jadee _ I took them off my wall and stuck them again then MAGIC it worked 😂
@cammcondones4 жыл бұрын
Same
@alexia-nc8ut4 жыл бұрын
My led lights aren’t showing certain colors
@Tired-Metalhead4 жыл бұрын
Same when I change the color one side is like green when the other is orange 😢😭
@aidacardenas68504 жыл бұрын
@@Tired-Metalhead that happens to me I emailed the company and they just shipped a new one to me free of charge
@Tired-Metalhead4 жыл бұрын
@@aidacardenas6850 my dad called them but they haven't answered back yet
@aidacardenas68504 жыл бұрын
@@Tired-Metalhead email them
@Tired-Metalhead4 жыл бұрын
@@aidacardenas6850 they still haven't answered back im just buying new ones
@abigailsmittyy4 жыл бұрын
so 3 of the lights on my led strip stay blue when i turn on a different color such as like purple, white, pink, & red but on other colors like red, blue, green, they are just fine. is there a way i can fix this?
@allthingsmia8984 жыл бұрын
im having same problem
@ruizemili4 жыл бұрын
i just received my led lights but only green turns on. For instance, if i click purple or yellow it either dims or turns off. Depending on the color I choose. The arrows ARE matched. help?
@rayannmartinez7034 жыл бұрын
i have the same problem did u find a solution?
@jariperez73724 жыл бұрын
My lights only show yellow blue and white, when I disconnect I one of the lights the other one is normal😭
@koolaidislife25064 жыл бұрын
when i plugged my led lights into my extension outlet, they turned on but they won’t change color. i would try using the remote to change the color but it just stayed on purple. please help me 😩
@rosie__9994 жыл бұрын
Mine always gets stuck in purple too :/
@zuperzachattak36104 жыл бұрын
Mine does that same with very low brightness! I left them on overnight and when I woke up they were in that state!
@emileevanvoorhis11823 жыл бұрын
i just got mine for christmas and mine do the same thing. they are stuck on red and won’t change colors. did u figure out how to fix if???
@fantasybaystore Жыл бұрын
What do i do, if connect only happens when i press the connector close? I tried adding more paper to make it thicker but it doesnt work. Only adding hard pressure by finger squish makes the lights work
@itznayn45244 жыл бұрын
Why only one side of my led lights work n when I flip the connect thing the other side stop working and the other one works... plz contact me if u know how to fix this
@D1POPOP4 жыл бұрын
Yes same problem with me have you figured how to fix it?
@itznayn45244 жыл бұрын
Crunchy flip the sides of the thing that’s on your wall and it should work
@D1POPOP4 жыл бұрын
Itznay N wait the thing?
@D1POPOP4 жыл бұрын
Itznay N what thing?
@D1POPOP4 жыл бұрын
Itznay N is it the thing where you connect the four lines to?
@eddiecruz94244 жыл бұрын
I just go my led lights and the lights work fine it’s just the remote isn’t working. The lights just stay 1 color
@c_chernik2.0944 жыл бұрын
I was getting sooo frustrated thank you sooo much
@osmanimran4584 жыл бұрын
For some reason my LED strip stays on very very lightly even when I turn the strip off.. it’s not that noticeable during the day but at night when it’s dark you can definitely notice it Any tips ?
@allyquinn45872 жыл бұрын
I Think ,u might still have power going through it m8
@chloeking4233 жыл бұрын
I’m so confused my room is bigger than one strip of LED lights and when I connected the other Strip to make it fit in my bedroom the other half of it won’t turn on
@velleitebelle48124 жыл бұрын
I received my led lights today, I made sure to plug it in correctly, but it’s not working.
@jaedanj25154 жыл бұрын
Ada Onyeani did it ever work?
@velleitebelle48124 жыл бұрын
Jaedan J yes
@The.aprilaraque4 жыл бұрын
Ada Onyeani How?
@jamirahdesirae42564 жыл бұрын
Ada Onyeani howww?
@harrishareyes2734 жыл бұрын
Ada Onyeani HOW PLEASE ANSWER
@SimBits3 жыл бұрын
Thank you for this! I kept plugging the wrong side (negative to positive) without realizing!
@cr0wzzz2 жыл бұрын
you literally solved my problem in a second lol
@ameerahturay19644 жыл бұрын
I got mine 2 days ago, put it up today, and it didn't turn on. Although, I *did* cut on all the cut marks, was that right?
@mcea45 жыл бұрын
My leds have connectors but only light up when i squeeze really hard on the connector! Anyone know how or why? And what to do to fix it
@summerrayne87094 жыл бұрын
Cynthia Lopez sMe
@jessicajohnson63974 жыл бұрын
summer rayne explain-
@prod.itsmason4 жыл бұрын
I have two light strips connected together, and i want to add a 3rd, but it won’t turn on. The strip isn’t broken when by itself it will turn on but not when connected to the other ones i have
@nerfazir5 жыл бұрын
I got mine few days ago. Working perfect. And now when i plug them they turn on instantly instead of turning on on the remote control. Even though i turn them off, they still glow
@debszz4154 жыл бұрын
komarac lucky mine doesn’t even work for me
@dennydarkko4 жыл бұрын
Okay, serious inquiry’s only. I’ve had these light strips for about a year, and every time I turn them to the color red, they are all red, but when I turn them to blue, three of the tiny lights aren’t working. And then when I turn them to white, the three that weren’t working turn yellow. And so on and so forth, basically there’s three little lights that aren’t in sync with the colors I’m choosing. What do I do?
@robboss23474 жыл бұрын
dennismaryanski mine do the same i’ve got no clue??
@robboss23474 жыл бұрын
dennismaryanski update: i have 3 strips and one ended up being the wrong way round so try twisting to connectors maybe??
@isabellagrace86224 жыл бұрын
I got mine today. And I tested them before I put them on my wall, they worked.I then tried stapling the power cord to the wall I didn’t puncture the power cord however now they don’t work now😭😭😭someone help please
@aaron_kingtana28714 жыл бұрын
Staple? Damn bro gg.
@rihze4 жыл бұрын
why the fuck would you staple it lmfao
@helloitsloulou66910 ай бұрын
My led strips are 4pin but smaller in thickness won't align with my connectors, can i find smaller connectors with 4pins
@Mells8684 жыл бұрын
I got my led lights today and put them up. They were working perfectly fine. They still are but one of the lights are a different color from all the rest how so how do I fix it
@carlypetersen18383 жыл бұрын
what should I do every color of led lights is working, but when i turn on the blue it only works on one side?
@vernonpeterson33235 жыл бұрын
Background music overpowers the voice. Sounds interesting but can't make out everything said.
@mmoobloom4 жыл бұрын
i bought my lights on amazon from RGB and they have 4.5/5 stars. The red is barely there! I've tried to turn it on and off, and sometimes the red becomes vibrant for a millisecond. I don't know what to do :(
@riah36764 жыл бұрын
grace this is happening to me and I’m annoyed
@TriggerTwinz4 жыл бұрын
Same here
@ameenayyad18724 жыл бұрын
My lights only light up red and when I press on blue and green, nothing glows and when I press white, red shows. How can I fix this
@rayannmartinez7034 жыл бұрын
same problem did u find a solution?
@juliakolaski80484 жыл бұрын
Liam please help I’ve had mine for about 2 or 3 months and I had lost my remote a few weeks ago and just found it and me and my friend were testing diy colts and all the sudden they turned off. The buttons on the wall and the remote isn’t even turning them on. I plugged and unplugged them and fixed the wires and everything but they still don’t work! What should I do
@wrex89314 жыл бұрын
Where one connects to another there may be an arrow on the pieces that connect them showing they have to be facing the same way
@aesthxticxz...152 жыл бұрын
Can you help me? My LED Lights turn on and off but when I press for example red, the colour blue comes. This is happening to all my colours, nor will it respond to my auto change function. It just won't respond, please help.
@isabellesiva37785 жыл бұрын
My lights won't turn on at all. It's not a problem with the power source, it works fine when other things are plugged into it. What should I do??
@Liam-yy9ll5 жыл бұрын
Check if there is arrows on the plug thst goes into the lights if there is then make sure they're aligned. If not make sure it is plugged in properly. If it isn't to do with wattage then it must be with some of the parts depending on which one it is, it could be the adapter most of the time it is so if you can find a model number on it and buy a new one thats all the advice I can give you however I'm no expert.
@bebesniece28994 жыл бұрын
Liam Can u plsss help me !! 😭😭 I got my led lights today & they were both working them when I was installing them & once I put them on my wall they were still working then out of no where one side of my lights cuts off (they were working for a good hr or so) any advice ?? Plssss answer 😭😭😭
@iccyg00224 жыл бұрын
Need help! My led strips are not working right(specifically GREEN). When the led is on turned off green is on but on dimmed. When I turned it on and set on green light same things happen when it is off. dimmed green only appears. That is why when I set it on white, purple/pink color appear. It seems green is not working properly. Please help. Thanks in advance!
@karmaplays48573 жыл бұрын
I need help I have 4 wire 3528 rgb strip light and i want a connector between two cuta but i couldn’t find one anywhere cause 4 wires some only with 10 mm strip light width but my strip light width is 8 mm. Please help
@Ruben_Padilla4 жыл бұрын
My led lights (Govee) are set up correctly in my room but their are certain bulbs that are a different color than the color I chose. Any solutions?
@christianayo1795 жыл бұрын
to hang up my lights i used staples, but some staples penetrated the actual strip, they worked fine right after i hung them up but a few weeks later they spontaneously stopped working. i haven’t tried replacing the battery in the remote but i’m thinking that could be a potential cause. please help, i don’t know what else to do
@Liam-yy9ll5 жыл бұрын
Staples?? That's dangerous isn't it?
@alarmedone80155 жыл бұрын
U broke it dummy
@harris10314 жыл бұрын
Only one part of the two connector cables work. Should I just return everything and buy a new one?
@chrislopez7704 жыл бұрын
2 questions. 1 mine keeps turning off then back on every 2 minutes. I cant think of what would cause this. 2 when connecting the waterproof ones, whats recommended to put over the connections to keep them some what waterproof for outdoor use?
@paolaa.33464 жыл бұрын
my lights beep LMAOAOOA
@lornamy79734 жыл бұрын
got mine yesterday and they were working fine until i came out of the shower today and half of them wasn’t working, i already tried moving the white thingy to the other side but that didn’t work what do i do
@reidaholm43303 жыл бұрын
So i dont have to connect both sides to each other? I can just cut them and it'll work??
@winnie-lp8gf4 жыл бұрын
what do i do if my led lights work but green is the only colour that shows up, and if i click the other colours it's a series of bright and dark greens
@jameliasmith83174 жыл бұрын
Mine are kind of weird, obviously they’re working but the one light strip with the charger wire thing plugged into it is a lot brighter than the other one, the other has lights not working, is it not powerful enough or something?
@beaThrees_3 жыл бұрын
mine wont turn on, but when i tried to push it earlier it was flicking, but when i tried it again it wont work. i had this leds for 3 months already. nothings wrong with the battery, even if i try to turn it it won't. idk if its incorrect wiring or something, but it just wont work yo 😭😭
@sheilavazquez-guija554 жыл бұрын
Mines just stays one color and I tried everything. I changed the battery in the remote I left it unplugged for days and I tried switching the plug ins around, any suggestions ?
@ambertanvir26284 жыл бұрын
Do u think u can help the colors on the remote were right before but now the colors are not right for example im pressing the yellow botton and the lights are going purple what do i do
@lilninibee3 жыл бұрын
What do I do if one side of my lights aren’t working?
@shirleyhickey50592 жыл бұрын
Hi my light strip only comes on when i push the connectors together when i let go they come off
@HitLightsLEDs2 жыл бұрын
Hi Shirley, this usually happens when connector pin doesn't have enough contact to LED strip copper pad. You may follow these simple steps in trouble shooting the issue: 1. Open the connector box 2. Check and make sure that LED strips oval or circular copper pads are properly lined up or touching the connector's silver pins. 3. If you can see that they aren't aligned right, gently move the strip back and forth until the strips light up properly and this usually fixes connection issues of your LED strip. If you need further assistance please contact us at 1 (855) 768-4135
@shannonbee84284 жыл бұрын
My LEDs have been working fine until this morning when I turned them on, all the colours are out of order. When I press orange, it's blue, turquoise, it's yellow? It's not A faulty remote as I have 2 and it's the same problem on both.
@brrilleyy4 жыл бұрын
⚠️PLEASE HELP!!⚠️ Only like three weeks into having my LED lights I noticed that my TV remote also controlled my lights for some reason? (Certain buttons would change the colours of the lights) but the On and Off button to my TV remote would turn my lights off and I would just turn my LED lights back on after.. but one day as usual my tv remote On and Off button turned off my LED lights and now they won’t turn back on at all. I’ve tried everything.. I’ve tried new sockets and new extension cords, I’ve tried unplugging everything and replacing it back in.. I even left the lights alone for a while thinking that they would maybe turn on again if I just left them alone for a bit but they still won’t turn back on :( someone please tell me what to do! ⚠️
@chelseaaudreyy3 жыл бұрын
I tested mine out and it worked fine but after I taped them up it just didn’t work anymore, why?
@kombuchalover24 жыл бұрын
Okay so i have one strip of LEDs in my room and i would say maybe 8 bulbs out of all of them aren’t showing the blue color. so if i turn it to teal it will just show green as well as any color that includes the color blue. and it’s only like 8 things out of all of them... help?!
@specialunicorn30914 жыл бұрын
My lights are stuck on flash mode and won’t turn off or change to a specific color. HELP
@laurengabrera80834 жыл бұрын
my leds only work a tiny bit when i touch the silver thing in between the actual lights and if i touch the one labeled “green”, it turns blue but when i touch the one labeled “blue” it turns green
@andreasmoustakas1171 Жыл бұрын
same issue here, you ever solve it ?
@laurengabrera8083 Жыл бұрын
@@andreasmoustakas1171 no srry hadda trash them 🤷🏻♀️
@themillerfamily19724 жыл бұрын
Ive done 4 sets of lights. TVs, bedrooms. I connected 4 sets of strips together. One strip will be yellow and the other 3 are red. One strip is white the other three are blue. In the bed room the further the distance the color changes. It will be red close to the power supply and almost pink orange by the end of the 60' run. These connectors do not work well at all. They are so finicky.
@treciaspence81764 жыл бұрын
should we keep them plugged in while giving it a break
@liz_i34 жыл бұрын
i have 2 of 5m strips, i bought both at a different time ive been using it for a week now. but i woke up then the other 5m strip, a small quarter of it has no blue on it. the first control box wasnt working, the other strip wasnt as bright as the other one. so when i changed it, the lights are equally bright but the blue is still gone. Help me lmao
@Gamer-lu4xg4 жыл бұрын
Wait I bout same brand but diff weeks than I adapted them but 1 side brightness isn’t working like the other one also how do u sync them cause mine when I change one side has diff color other one is a it side
@HHHavenn2 жыл бұрын
what can be the issue if the light strip has a constant color, even when the controller says off?
@HitLightsLEDs2 жыл бұрын
Hi! To further assist you with your questions and inquiries, you may reach out to our Customer Support at customerservice@hitlights.com or call us at 1-855-768-4135. Our customer support is available from 9:00 am- 5:00 pm, Monday to Friday. Thank you!
@ellaward80204 жыл бұрын
Mine was working for like an hour and then the remote wouldn’t work, i’ve tried looking on youtube for hours, please someone help.
@steviep93944 жыл бұрын
my lights started flashing one day and ive seen people say its because of the ac/dc adapter being bad or incorrect. I really don't know what to search for
@pauls8264 жыл бұрын
Hi I have rgbw leds and they we’re working fine I have added additional ones on and now the white stays on and I can’t turn it off
@Emma-rr7zm4 жыл бұрын
I got mine a week ago and j was hanging out in my room when they just shut off. So I unplugged them and left them for a few days then I tried to plug them back in again and they won’t work. And when ever I try to plug them In there is a big spark and I hear a loud pop
@SaphiroAzure25 жыл бұрын
The connectors on my set just don't work. Maybe a few of them at best but here's the worst part. The most important one doesn't work. The one connected to the power! The light strips themselves seem okay but I can't use mine if it can't connect to the power. I seriously hope they actually did something about this. I don't even think I can find the set I bought. I bought them last year. I put the whole kit away because I was frustrated and forgot about them until now. I tried to set it up again and .. nope.
@haileyibsen213 жыл бұрын
On of my led strips go grb down and the other grb what do I do and how to connect it to the connecter please get back to me ASAP
@vianney.3335 жыл бұрын
I bought led lights from Walmart and I don't know how to turn them on or if they're broken can you help?
@ishankhedia76934 жыл бұрын
Did you try taking a plastic strip from the remote?
@Lukas-zu2tz4 жыл бұрын
The arrow buttons won’t work on mine.
@Lukas-zu2tz4 жыл бұрын
I found the solution: When you click the diy buttons hold down on the green down arrow or blue down arrow
@Lukas-zu2tz4 жыл бұрын
To make it more clear, just hold down on those down arrow buttons until it turns a different color for the diy buttons. What I did was I kept holding down on the down blue arrows until it turns green and keep doing to same things with those arrows.
@xvanishx16563 жыл бұрын
@@Lukas-zu2tz no shit that’s how diy works, u gotta make it blank dumbass
@LGN8R3 жыл бұрын
Mine stopped turning red after I was done hanging them up, what is the problem ?
@BR0KEN_L1ES2 жыл бұрын
So I'm having a problem where the 2 polarities won't match up when trying to connect lightstrip with L shaped connecter and I can not figure out how to get them the right way
@beaaa112294 жыл бұрын
What about once it’s connected. I use the Geeni app and for some reason I can’t do any color besides red and green n white. When I go to purple it turns red instead and when I try blue it’s green! My saturation is up 100% so I don’t understand what’s wrong
@beaaa112294 жыл бұрын
Pls help
@emotinal_kidd56744 жыл бұрын
Mine doesnt work, I connected everything correct way, when I plug it in its lights up for one millisecond and than turns off, I thought it was because of the remote but remote is also fine. Anyone knows what the issue can be? I can show you how it looks on snap
@malcom60104 жыл бұрын
Emotinal_kidd mine are also doing this, so if anyone could help that’d be highly appreciated
@addiejean98044 жыл бұрын
i’m two months late but same. has anything worked?
@oliviathesociallyawkwardme5854 жыл бұрын
Mine are doing that too, I’ve been trying to fix them for months 😡
@cyqo04 жыл бұрын
I unplugged and plugged them back in and once i did only 3 of them light up please help!
@kindred37464 жыл бұрын
the lights i got were by daydream, and the first part that i connected worked fine and could change colors, but the second strip that i connected is on but wont change color. plsplsplspls help me
@Rain3_s Жыл бұрын
What do i do if my lights dont have the line to cut???
@jakeisrich4 жыл бұрын
I tested mine and it perfectly worked but then i cut it on the copper thingy and cut it in the line after that the only strip near the plug is woking and the rest doesn’t work
@raenc4 жыл бұрын
Jake Lark sameee
@ash88065 жыл бұрын
one of my colors doesnt work..how do i fix that
@101FineMan5 жыл бұрын
Ashlee's DIY Channel SAME
@RealVerxcity3 жыл бұрын
so when i plug in the power it works for half a second then turn off they dont work when i fully plug it in
@TSJ994 жыл бұрын
Mine will only switch between red, blue and green or a combination of two of those colors.
@rachael37254 жыл бұрын
Tecun same
@cierrarose91994 жыл бұрын
same for me! does anyone know how to get those colors to fade instead of it being the two colors
@rachael37254 жыл бұрын
Cierra Rose everytime i plug mine in they switch from color to color it’s very wierd my remote doesn’t work at all
@trilogy.xo28864 жыл бұрын
My lights turn on, and they change color, but when i choose diy and use the arrows. The arrows dont seem to work.
@jada52293 жыл бұрын
can someone help me. i got the minger lights but one half works fine i can change the colors then the other half that’s connected doesn’t work it will only stay red or green
@shotarcherz16903 жыл бұрын
Idk if this helps but where you connect the strip to the input thing, the input thing has an arrow, THAT ARROW HAS TO BE TOP UP!
@zionawhite46324 жыл бұрын
i plugged them in and they wont turn on, but when i touch a censor thing on the strip it turns on a portion of the strip and i changed the battery in my remote to see if thats that problem but now it wont open, my little sister spent 50$ for them
@KaiKusters4 жыл бұрын
Just bought a strip yesterday and they worked fine I woke up today just to find out they won’t turn on anymore for no reason at all Idk what to do I’m just so mad because I was trying to get them for months
@maddiebrumley82804 жыл бұрын
What if it’s just blinking green blue and red and it won’t let you change the color ... plzzz I need help
@thezombiehunter14 жыл бұрын
Was trying to build a neopixel blade for my lightsaber and it has a RGB compatibility in the strip but for some reason when I wired it it all came in white and when change the color I can change the color of via an app on my phone with my saber but I have a question if both data lines are touching with this cause the LEDs to just register as plain white
@kyzroll4 жыл бұрын
when i cut it down the line they broke 🥺 help
@galiciaallen34364 жыл бұрын
Right
@addyprime89764 жыл бұрын
Mine don’t do the right colours and some colours just go rainbow and flash all the time I can’t have the on because they give me nausea
@berkledeath56454 жыл бұрын
Bro, if sum1 can answer why my remote be changing green when I hit pink and blue don’t work, multiple other colors don’t work either?
@juneybaby4 жыл бұрын
Only one piece of mine is light up how do you connect the others
@SnowFlakez3 жыл бұрын
My thing to connect it is lose and if I do it carefully and it doesn’t fall out it won’t work. I used to just set them down carefully and it worked but not the connection thingy won’t work at all. Sorry this was badly explained but if anyone could help pls reply to this comment (I have stardust leds btw)
@madysontorres74084 жыл бұрын
what do i do if i cut my led lights in the cut spot and then reconnect them but are now different colors
@serena87984 жыл бұрын
i just put up my led lights today. they were working perfectly fine until i turned them off while we put the rest of them on. when i tried turning them back on it wouldn’t work. we unplugged the wires that connect to the white strip on the white box. they used to flash when we would plug it back in, but now it’s doing nothing. can someone please help me.