Common mistakes in White Toner Transfer

[@leviteapparel]

THINKING ABOUT GETTING THIS PRODUCT TO FEATURE ON MY KZbin CHANNEL HOW MUCH THE PRINTER.

[@Ghost-White-Toner]

Great!

[@sheilamorrisonrealtor]

Thanks for sharing ‘your miatakes’

[@Ghost-White-Toner]

We all make them...! It's a learning curve!

[@jessiejames7364]

Hi, I just want to ask what if my design has a black and white color, what toner will I use ?

[@Ghost-White-Toner]

hi, please have a look at this video where it is explained: kzbin.info/www/bejne/q2irfZlrn7Wjp6c&lc=UgwWTDEGaPGslu3u1fh4AaABAg. :)

[@joelsanchez7201]

please make a video to know how to use the cp5225 printer

[@Ghost-White-Toner]

We already have this video Online here: kzbin.info/www/bejne/a4m6kIWoe51kjqM&t

[@ericthomas9551]

Hi my transfers cracked some times before and after first wash.? Love your product but need help with the cracking. Thanks

[@Ghost-White-Toner]

Hello, please contact our support team at: [e-mail], please include your order number so that we can allocate your request.

[@flexlabz]

Do you half tone or rasterize? Or is it impossible for the x and y to line up when running it through twice on normal Hp printers?

[@Ghost-White-Toner]

Hi, no the classic rasterizing like with a RIP software is not possible. You always have a slight offset in the print with 2 print passes, so we put the file that will be the white background 3-4 pixels smaller than the design so that you do not see this offset in the end.

[@vandieseldesigns]

If I have a few little spots where the adhesive did not adhere to sheet A, can I still use the transfer if I'm ok with the light spot? Will not having adhesive in those spots cause the design to crack or any other technical issues? Is there any reason not to use the transfer other than you might see through the area?

[@Ghost-White-Toner]

Hi, apart from a slight deterioration of the motif due to the non-transfer of the adhesive,, it will have no other effect on the quality and durability.

[@katgillette9175]

If you applied an image to a shirt that left behind white lines from the B paper (because of too much pressure when pressing the A & B paper together), can that glue from the B paper be removed from the shirt or is the shirt trash?

[@Ghost-White-Toner]

Hi, have a look at the video to see if there is a helpful tip for you: kzbin.info/www/bejne/mGe8ZnZrqbyqZ8ksi=C8AxVvHlsLAZ58Rf

[@djcalderonentertainment]

hi, if I have already th eHP laser printer and the white ghost,,,,,,what kind of paper I need to use the white ink the forever dark no cut? any link to buy it pls

[@Ghost-White-Toner]

You can use our transfer media. It is available here: www.ghost-white-toner.com/transfer-foils/

[@djcalderonentertainment]

But thats the only paper i need? Im just startbwith this bussiness to i would like to know ...if i print on that paper link u send me..and them to the heat machines....or what papers i need to buy? I think is a A- B papers?

[@critimermia7660]

Hi, was macht man falsch wenn auf dem Ausdruck aus dem OKI Drucker lauter Flecken, wie Regentropfen, sind ?

[@Ghost-White-Toner]

Leider supporten wir keine OKI Drucker. Nur HP

[@Laura-Anne470]

When I peel the design off of the textile, the white toner seems almost like it has become dry flaky paint. Have I gotten it too hot?

[@Ghost-White-Toner]

Yes this can be the issue. You can send pictures to [e-mail] for more help.

[@Laura-Anne470]

@@Ghost-White-Toner so now I’ve gonE through literally A Shit ton of transfer paper. I had enough and almost gave up. The problem is Forever paper. It sucks. It’s results are inconsistent. I treated this think like a dam science experiment. Neenah papers are such a better quality. They work well with the white toner. With the Forever paper it wasn’t working at all. Forever is making your Ghost White look bad.

[@allsumbyanymeansllc.790]

You gotta heat up the lower platen.. it’s imperative

[@Andust253]

I have been tihnking about getting a laser printer to use your products. how much approximate cost are you paying per shirt, not including the shirt?

[@Ghost-White-Toner]

This depends weather you choose A4 or A3 paper as the cost is different and also on the design an how much printed areas it as. You can send us an Email to [e-mail] with some info what you do and we can give you more details.

[@diamondprincess1045]

How do I get more info or ask question

[@Ghost-White-Toner]

Why not email us to [e-mail]

[@AfterChurchPodcast]

Why do I keep getting white spots on my transfers after they print?

[@Ghost-White-Toner]

Unfortunately, we can't tell you without seeing pictures of it. You are welcome to send us an email: [e-mail] please mention your order number and send us photos of your problem.

[@yasseralzaim87]

while i am peeling b paper from a paper i notice that all my design on the a paper move out to the b paper

[@Ghost-White-Toner]

You are useing faaaar toooo much pressure my friend. Check you heatpress settings.

[@FernandoStanguerlin]

Muito Obrigado por todos as diga.

[@Ghost-White-Toner]

Thank you!

[@Zeioth]

My colors look bleached after transfering the toner transfer to the shirt. What can cause this?

[@Ghost-White-Toner]

Hi, what kind of settings, toners and foils are you using?

[@Zeioth]

​@@Ghost-White-Toner Printer: HP5225 Paper setting: Transparent Foil: None Temperature/pressure: As in foreverdark official instructions. Toner: Official HP cartridges, only CMYK for now Very likely the lack of foil caused the pigments to burn. Also I think my press doesn't have enough maximum pressure. In my tests, I need to do it without foil to unmarry corectly, but I think if I order a thicker mat from aliexpress and use silicon paper, I should be able to have all steps right.

[@Zeioth]

@@Ghost-White-Toner The colors look good on the A paper, they look washed out after pressing.

[@Ghost-White-Toner]

Hi, I'm not quite sure what you mean by: "Foil: none". You can also set the paper setting for printing on the A-foil to "not specified" to achieve ideal results with this printer. You can also set the color intensity of the individual toners to +5 in the printer driver. When pressing, do you use 5-7 layers of A3 copy paper that you lay over the a-foil and the B-paper? as we do in the other transfer videos.

[@Zeioth]

@@Ghost-White-Toner What toners should I give the +5? I've seen for oki printers they advise increasing magenta +5. Is the HP5225 the same? What colors config should I give the +5 in the printer settings? Thank you. Sorry, the foil I use is forever dark laser.

[@shastacarranza3896]

When I do the A Sheet cold peel, my design is peeling up in some spots off of the shirt as well. What do you suggest?

[@Ghost-White-Toner]

Try to peel more smoothly by folding the edge and rolling. Apply pressure with your hands when peeling.

[@levarberry7020]

@@Ghost-White-Toner If you can make a video on this that would be great... 2-months still can't get it right. I have use vinyl when I need white prints on dark garments.

[@allsumbyanymeansllc.790]

You have to heat up your lower platen… the most important step

[@tkptv1]

mine keeps printing grey

[@Ghost-White-Toner]

Please set your printer o "greyscale/black and white only" printing.