Como comunicar em Modbus RTU - N4D3E16 e TM200ce24r CLP Schneider - IHM GXU3512

[@jrffabiano2544]

bom dia peofessor ! otimo video gostei muito, poderia fazer um video acionando as saidas da placa N4D3E16 ? obrigado

[@claudio21222]

Boa tarde Ja fez com o plc da china FX3U ? Estou tentando, não estou conseguindo

[@alevx94]

Hi, I would like to ask you a simple info. Do you know if is possible to use both inputs and outputs at the same time? From what I've read it just says the you can't command the outputs from the inputs, but it's not clear if through Modbus is possible to use both inputs and outputs. Also, there aren't video showing them working simultaneously. Thanks

[@reletrica5075]

yes it is possible to trigger both inputs and outputs

[@alevx94]

@@reletrica5075 thanks for the clarification mate 👍

[@PiotrPiotr-hb5jd]

Hello friend, could you record a video on how to connect this module with the Siemens Logo controller or how to set the Modbus address for the Siemens Logo controller?

[@張昕哲-k1s]

could you share the N4D3E16 word file (the RS485 command), please?

[@reletrica5075]

Hi, could you be more specific?

[@張昕哲-k1s]

@@reletrica5075 the word file at 00:49. i have no idea how to receive the input status and how to trigger the output status by RS485. Because i can not search the word file on google, i do not know the N4D3E16 register address.

[@reletrica5075]

@@張昕哲-k1s Hello, the slave's first word is destined for word 129, which corresponds to input 1, and goes from 129 to 144, each one corresponding to an input. regarding the output, the word is 112, and each bis of this word corresponds to an output on the slave.

[@張昕哲-k1s]

@@reletrica5075 thanks for your help. I solved the input ststus scan and success to triger output ^ ^

[@TECHMEXICO]

Please share your document :D

[@emil.brunner]

look in the video description -> kzbin.info/www/bejne/Z4aqqpyqp7R8ZtU