Comparing 3 Professional Flutes Haynes Powell Brannen - Flute Center Sponsored

In this video I compare 3 professional model flutes.
All silver.
All handmade.
All hand cut.
All beautiful.
All sound different.
Watch as I describe and play each individually. Then at the end I put clips of each 3 side-by-side for you to easily compare. Which do you like the best?
Demonstration Run Through
1:50 Haynes
6:44 Powell
10:38 Brannen
Side-By-Side Comparison Clips
14:36 Brannen
15:12 Powell
15:58 Haynes
Here is a description and link to the flutes and headjoints demonstrated in this video:
William S. Haynes Custom Handmade Flute
Coin Silver (.900) hand-cut body, sterling silver lightweight mechanism, Haynes pinless mechanism, soldered silver tone holes, sterling silver barrel, rings, ribs, and posts, modern Haynes scale, French (open hole) model, pointed key arms, gold springs, Straubinger/Pisoni S2 pads, 0.014” / 0.35mm tubing, A=442, offset G, split E mechanism, C# Trill key, B footjoint. Handmade in USA.
flutecenter.com/products/will...
Haynes Silver Handcut Headjoint - Coin Silver (.900) Tubing, Silver Lip Plate and Riser. 0.016” / 0.40mm tubing wall. Nagog cut. Handmade in USA.
flutecenter.com/collections/c...
Powell Handmade Custom Flute in Sterling Silver
Sterling silver (.925) body and mechanism, Powell pinless mechanism, soldered silver tone holes, silver rings, ribs, and posts, modern Powell scale, French (open hole) model, pointed key arms, white gold springs, Straubinger pads, 0.014”/0.35mm tubing, A=442, inline G, C# trill key, D# roller, B foot joint.
Handmade in USA.
Verne Q. Powell Sterling Silver Handcut Headjoint - Sterling silver (.925) tube, lip plate, riser, and crown. 0.014”/0.35mm thin wall tubing, Philharmonic cut. Handmade in USA.
flutecenter.com/collections/c...
Brannen Brothers Handmade Flute - The Brögger Flute
Sterling silver (.925) body and mechanism, Brögger Mekanik and Brögger Acoustic, soldered silver tone holes, silver rings, ribs, and posts. French (open hole) model, pointed key arms, white gold springs, Pisoni pads, 0.016”/0.40mm tubing, A=442, inline G, split E mechanism, C# trill key, D# roller, B foot joint. Handmade in USA.
Brannen Cooper Handcut Headjoint - Sterling silver (.925) tube, lip plate, riser, and crown. 0.016”/0.40mm tubing. Modified cut. Handmade in USA.
flutecenter.com/products/bran...
If you are serious about trialing a professional model flute, please contact my friends at the Flute Center, and use my code for some special perks: DRFLUTE
To start your flute trial, you'll first want to go to flutecenter.com and fill out the form. Here’s the link:
flutecenter.com/pages/trial-form
Then put my code: “DrFlute” in the box labeled “Influencer Code.”
This code gives you these extras with some exceptions:
*3 extra days to try your flute - that’s a 10-day trial instead of only 7 days
*6 extra months of warranty on your new flute - that’s 18 months instead of only 12 months
*Free Shipping of up to three flutes, piccolos, and/or headjoints at a time for trial!
*10% off sheet music
*Free domestic shipping on instrument purchases
Plus, when you purchase a new flute using my code, FCNY will pay me a small commission. Thank you!
Thank you, Flute Center for sponsoring this video.
Comparing 3 Professional Flutes Haynes Powell Brannen - Flute Center Sponsored
• Comparing 3 Profession...
DoctorFlute.com/downloads
/ doctorflute
Say Hi on Social!
/ doctorflute
/ doctorflute
/ doctorflute
Ask me a question:
www.doctorflute.com/contact
Send me questions about all things flute - get an answer with a video, blog post, FluteTips, podcast, or a personal reply.
Professional Flute Extras - Do You Need Them? FCNY Sponsored
• Professional Flute Ext...
Does Flute Tubing Thickness Matter - FCNY Sponsored
• Does Flute Tubing Thic...
The Difference Gold Makes on a Headjoint - FCNY Sponsored
• The Difference Gold Ma...
Which is Better a Silver Flute or a Gold Flute? FCNY Sponsored
• Which is Better a Silv...
Should You Put a Professional Headjoint on an Intermediate Body? FluteTips 170
• Should You Put a Profe...
Comparing Soldered Tone Holes with Drawn Tone Holes DoctorFlute - FCNY Sponsored
• Comparing Soldered Ton...
Does the Cut of Your Lip Plate Make a Difference on a Professional Gold Flute? FCNY Sponsored
• Does the Cut of Your L...
How to Choose a New Headjoint For Your Flute - FluteTips 100
• How to Choose a New He...
3 Levels of Flute Compared Professional vs Beginner and Intermediate
• 3 Levels of Flute Comp...
3 Levels of Haynes Flutes Compared Custom Handmade vs Q Series Semi Pro vs Amadeus Intermediate
• 3 Levels of Haynes Flu...
doctorflute.com/blog
#DoctorFlute #FluteTips #FluteTrial #HaynesFlute #BrannenFlutes #WeAreVQPowell #ProfessionalFlute

[@Kndnsssrlgn]

Wow that was amazing! I really like how different they sound. Btw I'm happy...I love my Sealos flute.

[@DoctorFlute]

Great! I am not familiar with a Sealos flute. Tell me about it.

[@FFerada]

This is my teacher

[@DoctorFlute]

😃

[@jeanhoover3406]

The Powell seems to be a struggle for you in the low register.

[@DoctorFlute]

That could be. I’m a huge Powell fan as I’ve owned 2 different ones. This particular one wasn’t my favorite. Still a nice flute.