It’s kind of comical how effective that bag was as a “non marring assembly block.”😂 what a magnificent video! So well done! I can’t wait to get my ESS now!!!
@aliorozco38649 ай бұрын
Why don’t you list all parts for all of us beginners? That would be much appreciated sir! New follower here
@johnheintz9828 ай бұрын
It lists everything in the build at the end of the video.
@Six01MudMafia26 күн бұрын
@@johnheintz982 yea it bothers me so much when people don’t watch the full vid maybe he would know if he payed attention
@Flapjacktheclown2 жыл бұрын
has an orange vise in the room but opts for a bag! very nice pete. Well done MDT and Vortex should be proud to have you
@conservativesniperhunter74392 жыл бұрын
Nice , real nice 👍. Now let’s see what sort of accuracy you can get out of the Howa 300PRC with the MDT ESS chassis and Vortex Razor scope. There are some shooters who turn their noses up at cheap Howa rifles, but shooters who have shot them know that these rifles are accurate enough for what they are used for.
@kirkmartin22232 жыл бұрын
🤫 don't tell people or Howa could get wise and raise the MSRP haha
@busterb0022 жыл бұрын
Due to your videos and mdt’s quality I built my 300prc on the mdt Acc chassis. Keep up the great videos
@styxrf2 жыл бұрын
Reminds me of your older videos. Good to get back to the basics from time to time. Great video!
@jonteesdale1811 ай бұрын
You're looking at a cool 4-5 grand right there. Love the rifle!
@chrislane72839 ай бұрын
What’s the cost break down for each part?
@user-mr1tq4ov5h8 ай бұрын
@@chrislane7283 Howa barreled action $790 MDT ESS $1,199.95 M-lok exterior weights $59.95 x 3 APW monster muzzle brake $161 Vortex Razor HD Gen II 4.5-27x56 EBR-7C $2400 MDT ckyepod $600-900 depending on model M-lok to arca rail adapter from MDT $44 euros Mount I have no idea what it could be. You are looking at roughly 5475 dollars brand new. Without looking for deals.
@binghoward704 ай бұрын
Wow! Too rich for my blood. I’ll stick with my Daisy BB pellets rifle… 😊
@macdaddy329 ай бұрын
Such a sick build. Thank you for what you do! Keep it up!!!!
The build is looking freaking awesome and the video quality is on par with the best of the best. I'm sure there will be a video where you explain your reasoning for using the parts that you've used. I would love to know why you've decided to not add the tuner to the set-up?
@edmondliang87092 жыл бұрын
Hi Piet, Could you please send the link of all accessories, models and quantities in the video to the comment section so that I can buy them on your website? Thank you.😊
@nicofourie43842 жыл бұрын
Adult lego
@societalpreferences91829 ай бұрын
Adult adult adult Lego
@toddparsons29802 жыл бұрын
Hope to see something from you when the 7mm PRC comes out.
@IMPACTSHOOTING2 жыл бұрын
You can count on it!
@phoenix38702 жыл бұрын
Looks awesome!!
@armeddiver2 жыл бұрын
Piet, I love your channel. You are the one that introduced me to MDT and I have done two truly complete builds using MDT for Stock, chassis, scope mount and grip. My builds start with just an action, Zermatt TL3; Proof Research Carbon fiber wrapped barrel, and TriggerTech Trigger. If I understand some of your older videos you have to start with a barreled action in South Africa. Fortunately, we don’t have to do that here in the states.
@IMPACTSHOOTING2 жыл бұрын
Those builds sound awesome!!!
@armeddiver2 жыл бұрын
@@IMPACTSHOOTING Thank you! I don't know what it would take for you to get a Zermatt Action with a Proof Research barrel, but if you could, they are definitely worth looking at.
@sethhughes2163 Жыл бұрын
More... More... More!!! KUDO'S to you for what we like to see my friend! Respectfully, Seth
@shredderdredder2 жыл бұрын
Gives me motivation to shoot more 300 PRC!
@JeffreyWilstone Жыл бұрын
My concern would be the accuracy of the Howa rifle itself? That’s a lot of $ in the MDT chassis parts?
@WiscoActual92022 күн бұрын
Howas are pretty damn accurate
@JoshuaJansen62692 жыл бұрын
Ek het baie van die video styl gehou. Dit is n goeie een om te weet wat dit behals om jou eie geweer van die grond af te bou. Baie dankie Piet.
@Umerahmed-m2l Жыл бұрын
Best Website to build a custom mid-range bolt action rifle
@luckyshotammunitiongunsllc23692 жыл бұрын
Best video you have ever made my man.. and you have made some good ones.. keep up the great work brotha
@JeffreyWilstone Жыл бұрын
I love that vortex ❤
@geoffreypenuel27462 жыл бұрын
How good is the Howa action? I see so many people running custom actions from BAT and many others, but for a factory action how does the Howa 1500 stack up? Thanks a bunch, always enjoy your content
@heinrichstoltz13562 жыл бұрын
Excellent build.
@bishipc1172 жыл бұрын
I love that color. Ooooo boy do I. I can’t wait to see how she shoot’s. ❤
@FoamFlingingHS Жыл бұрын
What a beautiful looking rifle.
@mikea327 Жыл бұрын
What ate the black blocks for? Weights for balance?
@hakuuna_matata2 жыл бұрын
OK I LOVE THIS VIDEO. You are making me wanna spend another 5k without saying a word....
@CarloKleinhans2 жыл бұрын
Great video ! Beautiful rifle.🔥🔥
@mohamedsafriabdulrhapor46502 жыл бұрын
Wow!!!!!! Nice & beautiful 🤗🤗🤗
@ColinWoo-n1b Жыл бұрын
What’s the length of your ARCA rail for this setup? Looks perfect fit
@fwod18672 жыл бұрын
A beauty, thanx to MDT 😁
@joelwilson3319 Жыл бұрын
Love this build i wana do the same exact one but im confused on the magazine parrt how you had use the 300 win mag one.would factory 300prc ammo fit in that mag or does it have to be custom handloads
@mattyolo Жыл бұрын
Do you need to blueprint the Howa action or do any other work to it for competition shooting?
@styxrf2 жыл бұрын
Can't wait to see how she shoots!
@mayormsuthu14654 ай бұрын
Wow what a video,great built it looks extremely different and effective 🎉🎉🎉🎉🎉🎉🎉
@georgelza2 жыл бұрын
looking forward to following you on your load development, have the exact same action/barrel in the way,
@joerobertson78872 жыл бұрын
Great looking rifle but you should have put the MDT vertical grip on it instead of the AR style grip. Want to see you shoot it.
@NiteWorXTV2 жыл бұрын
That's a thing of beauty
@mortenchristiansen64992 жыл бұрын
Ahhh... super satisfiyng to watch. Love it. Made a stressfull day all good again 🙂
@sarelsaunderson99372 жыл бұрын
Very nice video! How do you level your scope? Bubble level on elevation turret or do you hang a plumb line from the ceiling, level your action with a bubble level and while looking through the scope making adjustments according to the recticle and the plumbline line up?? Thanks for your answer!
@sampreston8548 Жыл бұрын
Hi Pete did you put any lock tight or anything in between the top of the action and the picatinny rail?
@IMPACTSHOOTING Жыл бұрын
Always, just the blue one.
@ediharnys7059 Жыл бұрын
Hey piet would like to know what T bar torque wrench u use here ?
@timmcfarland33112 жыл бұрын
I want to do a 300 PRC build with that chassis and the 18” forend so it will look better with the 30” barrel I’d put on and I’d use a 60 MOA scope base instead of 20 so I could get all 120 mins out of that 6-36 scope
@bygara618 ай бұрын
Where did you get the fore-end?
@oohdahloop2 жыл бұрын
That was super satisfying to watch lol.
@PassionforRifles2 жыл бұрын
Nice👌🏻. I have had Howa 1500 SS Varmint once, very accurate rifle it was.
@benelli51552 жыл бұрын
Love it ;) Can't wait to see you shooting with it and curious to know what kind of accuracy and velocity you can get :) I shot with 3 Howa in hunting configuration and they were great. Is the trigger the same than the Remington 700 ? Just to know if we can change the factory trigger ;)
@brettfettbeargaming2 жыл бұрын
Howa 1500/Weatherby Vanguards use the same trigger that is NOT the same as the remington 700
@Jessica373232 жыл бұрын
Should have put blue lock tite on those action screws. On the muzzle break too
@Chris-liwymi2 жыл бұрын
That break looks to nice to get carbon all over it, such a clean setup
@raynovanderwalt Жыл бұрын
Just out of curiosity, do you normally not put locktite on the action screws? If not, do you mind me asking why not?
@thomasanderson74542 жыл бұрын
Awesome video and MDT advertisement
@SaltonEarth-r6o9 ай бұрын
You like the straight grip, but hold a pencil in your trigger hand next to the rifle, and do this several times blind folded, that is taken by a picture of the angle of the pencil each time you hold the pencil next to or rifle. The angle of the pencil is the angle of your grip should be.
@garrywagener4358 Жыл бұрын
I have a Bargara 300prc with a muzzle and a silencer now aswell, but i would like to change my GRS Warg stock for MDT n26 folding stock. Unfortunately with Canadian law changes it's difficult to get one into new Zealand, even through a gun shop.😢
@jake_kwekwek1474 Жыл бұрын
cool vid man.what Howa model is your barrel action? and is it compatible with aics magazines? thanks
@yusuf92722 жыл бұрын
What wall panels are those
@VLDezy2 жыл бұрын
Is that barrel ready for matches? Sorry still learning more about prs competition and building a rifle.
@Blast0245 Жыл бұрын
How heavy is it with everything on it?
@diegoklazen75522 жыл бұрын
I'm new to your channel and I must say..I AM HOOKED..GREAT CONTENT..you have a loyal lifetime subscriber in me.
@stanimir_kirev_precision Жыл бұрын
I'm getting ess soon and I'm not sure if I should remove the scope for the assembly.
@IMPACTSHOOTING Жыл бұрын
Nope you dont have to
@stanimir_kirev_precision Жыл бұрын
Thanks
@AlpesVideo11 ай бұрын
Good morning. Would it be possible to know how to attach the Atlas BT65 bipod under the mdt LSS RF chassis ? Thanks in advance.
@ryananding245610 ай бұрын
It’s a specific attachment underneath. It’s a rail system
@austin_dyer182110 ай бұрын
Does 300 prc fall into the long action category. Or magnum
@lifestravels40152 жыл бұрын
Roughly what does a build like that put you back?
@j.e.honiball13272 жыл бұрын
Ballpark figure is $4000
@josephmandragoran42627 ай бұрын
This is exactly what I want to do some day soon I the future
@Ivan-xq7xh2 жыл бұрын
Beautiful!!!
@CrazyTheif2 ай бұрын
Back when KZbin was cool and let you upload gun build videos
@brandondyzel1302 жыл бұрын
I'm sad to see this, because I also live in South Africa and can't afford these things...... But we make do with what we can afford. How about making a super budget build and shooting tight groups with that at +500m?
@divanfourie13742 жыл бұрын
Now this was awesome like legos for men
@Stephen852 жыл бұрын
I am definitely copying your build as soon as I can afford it. I have been wanting something exactly like this for my new deer rifle.
@LarryeWhite612 жыл бұрын
ALL MDT parts ain't gonna be cheap, but he has ALL of the best pieces you can get.
@Stephen852 жыл бұрын
@@LarryeWhite61 well everything might not be an exact copy lol
@joestiller42702 жыл бұрын
Imo would look smashing with a tiger stripe effect to go on it.
@InsightfulGaming Жыл бұрын
Well done! Thank you.
@bradenhickman91542 жыл бұрын
Slick rig as always !!
@Jordan8820072 жыл бұрын
Love it man!!!
@jaspersweeney4086 Жыл бұрын
Silly question but.... with a howa 1500 are all stocks interchangeable? Purchased a 1500 heavy barrel and wanting to change the the stock will this be an issue? or Howa built for this purpose Thanks
@kirkmartin22232 жыл бұрын
Great video! I used my Howa mini action to shoot a hog this morning. That could be the next video. Howa is making the mini action in 6arc 😉👍
@michaelosayamen57302 жыл бұрын
What’s the difference between a MDT rifles and a Cheytac and why do you choose to take these instead of something like that
@PournaderiMehdi11 ай бұрын
How can I buy one package like thise?
@TheDollarSportsman Жыл бұрын
Welp, that was ridiculously fun to watch 😎. I’m considering doing this for my channel for elk season (so no weights and a different muzzle device to accept a suppressor). These should work for a left handed rifle, right? Last question: where do you get your music?
@airgunfun-wifeme65612 жыл бұрын
Stunning 😍
@sanenefwittreich93042 жыл бұрын
Well done it looks amaizing
@RK-vm1wz2 жыл бұрын
did you ever try Leica PRS 5-30x56 scope?
@pekkakompsi25152 жыл бұрын
It's best video... When we see it in a range..?
@MrLeslieDurling2 жыл бұрын
Great video perfect audio
@bygara61 Жыл бұрын
Ata Turqua Gen2 Is there for rifle?
@abrahamsmit94662 жыл бұрын
Diep netjies gedoen Pieter!!!
@sixfiveoutfitters12012 жыл бұрын
What are those black rectangular pieces installed on the sides of the handguard?
@j.e.honiball13272 жыл бұрын
Weights
@tonydevich7937 Жыл бұрын
I need one of those razor gen 3,'s
@JM10344 Жыл бұрын
Damn man. You have a lot of videos. You have been pumping them out for some time. Nice I am new to the channel so I'm playing catch up.
@IMPACTSHOOTING Жыл бұрын
Welcome to the show Sir
@arnoldaylward83702 жыл бұрын
Sjoe so what a gun!!! Sal nooit so roer kan koop vir myself nie, moet maar pelletgun skiet
@anrichniehaus7942 жыл бұрын
Baie nice video Pieter ! Lekker om te sien hoe als by mekaar kom.
@anrichniehaus7942 жыл бұрын
Hoe op aarde doen ek dit. Ek en tegnologie sukkel maar........
@liamcostello47742 жыл бұрын
Awesome build! I’m rather a Howa fan but not I can justify throwing a 15k chassis onto one of their barrelled actions. Oh, what finish is that matte black? Thought they were only available in blue or stainless🤯
@meghanbouwer93232 жыл бұрын
This was so satisfying. Such a mooi rifle ❤
@philipcooper897 Жыл бұрын
What's the muzzle brake
@kellym3531 Жыл бұрын
That takes me a week!
@user-ex8ed3uq7n2 жыл бұрын
Hi piet what aftermarket triggers do u run on ur howas
@CurtisDavis892 жыл бұрын
What platform do you use to post unrestricted videos about firearms? I want to do firearm build videos too but no clue where to go to show those videos under possibly a membership style platform or something like that
@tonydevich7937 Жыл бұрын
Nice looking rifle
@tylerfecho44542 жыл бұрын
The 3 mlok parts on each side (3 and 9 o'clock positions) are those weights?