Complete Feelworld LUT6S Walkthrough | Daylight Viewable Field Monitor

[@garrettsammons]

As far as cheap monitors go, Feelworld does a great job putting tons of features in an affordable package.

[@RGMGFitness]

After using this 2600nit monitor few a few years now I will never use anything less than 2600nut. It's just so good in bright sunlight! Yes, I know this video is from 2021 but it's still a great monitor in 2024.

[@sytesmedia504]

How do you cycle through signal options, example hdmi and sdi

[@_juanchamorro]

this is a brilliant video and even more than I was expecting, thank you. Adding to cart now

[@gscottfuller]

Very helpful as the instructions in the box are minimal. New to monitors. When I try to preview a clip, I only get a still of the first frame. Is there a way to play back the entire clip on the monitor. My camera monitor play button is not available while monitor is on and the monitor does not seem to have a play button. Thanks!

[@bakerfilms1764]

Lut out doesn't seem to work for me... Any reason for this happening?

[@come2idlewild]

What about the recording aspect of the monitor ? The length & quality & fps. Thanks…

[@RandomMotoThings]

Ahhh…why didn’t you click the anamorphic mode to show us what squeeze options we have? So important lol. Could you give me some info on that? Thanks!

[@grzegorzwaszczuk]

Is there a way to take a photo of what camera is seeing and save it to an SD card and/or a screenshot of the monitor?

[@afonsocovas9996]

Can we change camera settings (isso,shutter...) in the monitor??

[@garrettsammons]

Not with this monitor, unfortunately. For something like camera control I’d suggest checking out some of portkeys monitors.

[@OfficialDJTazer]

What’s the max fps viewable on the screen? Can you load 2 LUTs at the same time, as commonly you’d have Rec. 709 + creative LUT?

[@TheCoxwellTeam]

Hi Garrett... Great Video! Thank You. I and a Realtor and have an iphone 14 pro max. Would the LUT6 be overkill for using it as a monitor to photograph homes and possibly video homes. I would only be using it as a field monitor/display for my iphone? Or, is there a screen you would recommend for that? Thanks for you input.

[@OfficialDJTazer]

Your display is currently 6.69 inches; I see no necessity for this monitor for you, especially with the iPhone 14 Pro Max not supporting Log footage.

[@CB-qy2zl]

Less than 1 year with limited use and the HDMI feed thru doesn't work. Who knows if it ever worked as I just started to try and use it. Waiting to here back from customer service.

[@CapturaVideo]

It looks to me like it has arri locking pin locators for the 1/4 mounts. Can you confirm that? If so, that's actually a pretty big deal when it comes to mounting. Thanks

[@benthorn6445]

@garrettsammons hey just wondering how to get the SDI signal to the LUT6s monitor. Im plugging in a SDI feed to mine with no result, its saying HDMI no signal in the top right corner, should it auto detect or do i need to switch it to SDI somehow? Cheers

[@garrettsammons]

In the settings you should be able to switch inputs from HDMI to SDI

[@chariesbergero9662]

I have some problems. When I do a pan from left to right or viceversa I see a like a bad compression In the image, like little drips. Then when I connect my camera by SDI in 4 k the monitor can not show the image. When I connect my camera by HDMI the monitor show me the video with any problem. Could some one here confirm this? Thanks

[@j.merkerproductions]

is 6" enough for manual focus on moving subjects (with a fast lens)?

[@naps1saps]

If you're remote off camera, get a bigger monitor. On camera 7" was good enough for me but seemed too big sometimes unless you have a big rig. 6" should be ok if you're a one man show.

[@bradleykussy]

I also have the Komodo and I also bought this monitor but I cannot change the source from HDMI to SDI in the menus.....

[@garrettsammons]

Really? That’s so odd. I’ll have to take a look tomorrow and switch between them.

[@Janni51]

Love this monitor, but the mount is so flimsy

[@lyCanzz__]

Hey I'm new to camera stuff..!! I wanted to ask that can we use this monitor for self portrait photoshoot with a7iii or Is it only for video purposes..??

[@pirabakarkumarasamy9779]

Super. thanks

[@storageunit2683]

Does yours gets really hot? Mine does. Not sure if that's normal or not

[@garrettsammons]

It absolutely warms right up. I wouldn’t say hot to the point of hurting or burning someone, but definitely gets warm.

[@storageunit2683]

@@garrettsammons ahhhh I thought it was just mine. I do smell the screen when it gets hot. But idk. I left it running for a good 20 mins?

[@fredventure]

Thanks for the video good review! Where would you place the Feelworld LUT7S?

[@garrettsammons]

If you need a large field monitor, the 7S has all the same benefits but the bigger screen. It would just be personal preference I think.

[@jamesseward9263]

Great presentation! Thank you! 💕 so I assume your media is recorded to the internal cards in the camera? Does to apply any of the Luts to your Video? Or does it just show you a preview of what your output might be after processing on the computer and applying the Luts in post? Thanks 😊

[@garrettsammons]

You can load luts in for previewing, but definitely recording in camera. Nothing is applied to the video.

[@moonshipcreative8908]

Great video as always Garrett! One question, is it possible to change the output resolution? I'm thinking of using this with the Hollyland 400S, which only accepts a 1080 signal.

[@braydenjones4505]

Mine developed a green tinge around the border of the screen. Have you had a similar experience?

[@garrettsammons]

I haven't noticed that yet... I still use this one as the reference monitor for every youtube video too.

[@RadianFilms64]

Can you use the HDMI in and output through the SDI or the other way around? Or you have to stick with HDMI or SDI? Thanks!

[@jaoandrianjohary3136]

Asking the same question here! I wonder if you found the answer. Thanks!

[@garrettsammons]

I don’t believe this is cross compatible. If memory serves, you have to choose one signal or the other.

[@philpritchard8772]

better than a shinobi?

[@ustinpower]

Thank you for sharing this monitor! One more question, can I ask which camera and lens you used to film this video? I feel the quality is soooooo great. Thank you so much

[@garrettsammons]

Thanks dude! The setup I use for this is a GH5S, Metabones speed booster XL, and a Canon 16-35 L II f/2.8. I think the focal length is set somewhere around 20mm.

[@Karlabacken]

I have a question regarding using this with the RED Komodo. The Komodo outputs up to 12G SDI (4K) but this monitor only inputs 3G SDI (1080). Will it still work with the Komodo? The monitor only displays 1920 x 1080 anyway so I guess 4K 12G is not any use anyway. Or am I wrong?

[@garrettsammons]

You’re right. It’ll work just fine with this monitor. The Komodo should automatically adjust its output settings to match, but if it doesn’t, there’s menu settings to down res output to 1080p

[@Karlabacken]

Great thanks for the answer. And this has nothing to do with what resolution you record in camera right? I mean if I shoot in 6K on the Komodo. It has nothing to do with the output SDI being 3G or 12G?

[@garrettsammons]

That’s right! Internal recording and external viewing are completely different

[@thej.ustory-moviecomingsoo3878]

Excellent

[@bradleykussy]

I also have the same Komodo and Lut6s and my display looks different. Mind sharing your sdi settings?

[@garrettsammons]

There may have been a firmware update that’s modified the UI since i made this.

[@bradleykussy]

@@garrettsammons interesting. Can you message me and possible show what yours looks like after the update?

[@bradleykussy]

@@garrettsammons do you know why the UI is different? ALso having issues with the LUT Import (SD) id be curious to know more about. Freeworld Customer Suppport isnt vert useful

[@fos8524]

Hi. Can you shoot 120fps with it?

[@weareselfmade5888]

bruh

[@thanosbikos]

Thank you for this detailed review! Every feature explained thoroughly. I've been trying for a couple of weeks to find which monitor can print LUTs to the output. Almost no review mentions it. And it's an important feature if you want to record flat and stream live with a standard rec709 profile. So just to make sure, can the LUT be applied to any of the outputs? Both HDMI and SDI? Thanks!

[@MultiKiller22]

I'm having trouble sending out the lut via HDMI

[@ronineditor9920]

4:58 -- With that DC port... can't we just go right from that to the D-Tap if we're running an external battery, instead of a dummy battery...?

[@garrettsammons]

100%!

[@ronineditor9920]

@@garrettsammons Awesome!!! I definitely am going to get this, looks too good to be true. Thanks for the great review.

[@BurninSven1]

What would be very useful is if the lut was looped through to the HDMI output which I took for granted but it´s not. I was planning to use it for my three BMPCC and my Atem mini to get a rec 709 feed out of the Atem mini but no luck it wont work. To bad cause I got a ton of old vintage lenses for my pocket cams that I wanted to see what they would look ljke in a livestream. I´ll probably take it back to the store

[@MegaShowmaster]

👍

[@NikHem343]

I'm fairly disappointed with the monitor. I feel like I had to fiddle around with the colors and brightness / contrast a lot until it more closely resembled what I see on my FX6 monitor and even still it's not that accurate. My biggest gripe, though, is that highlights will literally burn away on this monitor while I can still see them on my FX6 monitor. Really don't know if I'm using this thing wrong or if something is up with my unit or that's just how cheap monitors are.

[@garrettsammons]

If you are using preview luts in monitor, those are displayed in 8-bit so it’s definitely a crunchy image. This is true with most production monitors until you get to the more industry standard stuff

[@NikHem343]

@@garrettsammons Thanks for your answer! I've got the LUTs installed in-camera, so the monitor gets the 1:1 feed from my FX6. I supposed this is the "cleanest" process, am I mistaken?

[@sytesmedia504]

How do you cycle through signal options, example hdmi and sdi