Complete Guide for making a QuadCopter using APM 2.8 WITH FlySky FS-iA6 Receiver STEP BY STEP

[@Krishna-zh3pw]

bahot bahot dhanyawad itni gehrai me jake poora process explain karne k liye..pixhawk pe bhi aisi video hai?

[@extrem2497]

Is APM and receiver getting power from esc?

[@samalasunitha327]

Can we use 5300 mah 3s 11.1v orange lipo battery for this drone.?

[@call4electronics]

YES SIR

[@gourobkundu2173]

Are the xt-60 cable and the nuts ans screws included in the kit? I am hoping of buying it.

[@BiggerPunch]

No xt-60 cable is not included in the kit. We bought it yesterday and there wasn't a xt60 cable in it.

[@premraj9795]

I have also bought kit from Rees52. In the video observed that reverse calibrated nose up & down.

[@alqadeebconsulting1278]

hi, i did all your steps one by one and everything went smooth as you showed. but when i do arming, it doesnt work. i have observed that if i do armimg with usb cable connected and battery as well, only then arming works but when i disconnect usb cable arming no more works

[@harshitgoyal1402]

Is this site is trustable plz tell nad make some other combo with telemetry and gps i want to purchase this combo

[@rees5286]

Yes you can purchase from this website.

[@christophernguyen7871]

Hi Your drone can return to hom ? Thanks

[@smartcreativesciencechanne7922]

Sister you are amazing 😍 girl also love IOT

[@mixed_media00]

Hi, did you use PPM Encoder?

[@rees5286]

No we didn't use

[@abipaily228]

Your forgot to calibrate the 4 ESC . Each motor should spin equally when armed otherwise on take off flight will destabilize and flip to one side

[@gauravbhole1049]

Hi , I am not getting the white dots on the compass calibration screen Please help

[@Ajmusicin]

What was his flying time

[@creativetech7399]

I am buy some products on your site but i get only few item what i do

[@Raj-Singh]

Hope to see another big projects next time

[@rees5286]

sure !! Thanks

[@bp1102]

Can you make a vedio separately for receiver and Transmitter fsi6

[@rees5286]

Sure, we will make it soon

[@parthasarathyvenkatadri]

can this carry a go pro.

[@manishsharma33]

Hi , in mission planner, i am not able to do accelerometer calibration, after tilting left, calibration fails. any solution with anyone?

[@ritesh_hudda.]

Ye quadcopter kitne der tak udta h

[@rees5286]

it depends on the battery's power.

[@BhumitVyas_at]

i made same like this but it tilting one side i used mission pilot and all calibrating done but not lifting smooth, it tilt one side please tell me what to do now

[@call4electronics]

please mail us your query on [e-mail]

[@abipaily228]

Calibrate each ESC. The instructions are on ardupilot website

[@melvyndsouza820]

one problem is that madam this local a2212 motor and the esc life is not good might can get damage at once , the better issunny sky

[@call4electronics]

It depends on how you are using them...

[@bp1102]

Where is power module for apm2.8 and how is the flight controler board powered

[@abipaily228]

They are powering apm using esc. No seperatepower module used. Its better to attach a power module as it reduces load on esc and prevents crash

[@ryanvessaoker4715]

Quite a different way to connect the ESC to the receiver. Normally you would connect 1 to 1, 2 to 2 and so on.Did not get that point thou.

[@noormohammed2765]

Does the altitude hold work without gps or telemetry

[@rees5286]

No it can not

[@noormohammed2765]

REES52 then for altitude hold what I want gps or telemetry

[@noormohammed2765]

In the video you didn't used telemetry or gps but in ardopilot you are choosing altitude hold mode

[@indianblogs7105]

Didi usb cable drone kea kiddhar lagayengea

[@roslio924]

I think you forgot to calibrate the ESV as I can see at the end of the video, the bottom left motor does not smoothly revolve

[@roslio924]

ESC*

[@gourobkundu2173]

Or it can be that it is in altitude hold mode..

[@abipaily228]

They forgot to calibrate each ESC . Each motor should spin equally when armed. This will cause destabilized flight on trying to take off and drone will flip on one side

[@yatharthsaraswat104]

Bhai aap Delhi ke hoo na

[@rees5286]

Yes , www.rees52.com

[@meenasingh8926]

Ha mara area ka ha

[@ib2sthok127]

I have a problem after setup complete. When I try to start,the motor didn't move. Why it's so

[@rees5286]

Mail us on [e-mail]

[@patriciobecerril2163]

Can I get the link to download the mission planner?

[@rees5286]

You can download it from the ardupilot website.

[@swamykt4630]

Nice sister

[@Vehiclespot]

Haaaaaa😢 Pls help my drawing is moving sideway and yawing instead of taking off smoothly...

[@sunilsoni-ni4zl]

kit purchase link open ni ho rha h

[@rees5286]

rees52.com/quadcopter/2261-test-a-gy-9150-mpu-9150-3-axis-electronic-compass-acceleration-gyroscope-module-interfacing-with-arduino-uno-kt701?search_query=QD001&results=1

[@rees5286]

It is working . you may have some connectivity issues.

[@prasheelkolvekar]

how to add camera and gimbal to this drone?

[@krishnarajeshsingh5672]

Gimbal kharid

[@mj_info294]

Minor mistake ,how to connect motor wire cw,ccw in esc

[@ranjanramekar7586]

Purchase site indian hai

[@rees5286]

Yes

[@nareshnk2110]

Hello, how to add gps to this

[@gobiandreson3111]

Mavlink not connected pls help me....

[@call4electronics]

Please mail us your query on - [e-mail]

[@nishasanil6626]

My drone is not flying smoothly. one side is tillting. i need help

[@namansingh6635]

Calibration of esc

[@abipaily228]

Esc calibration needs to be done in all cases . This video doesnt show that

[@mawthigiri]

Sir, why showing flight modes unknown and empty in mission planner

[@rees5286]

mail us your query on - [e-mail]

[@aaryan7666]

That's might be bcoz u have not connected the ardupilot correctly or not selected the port

[@rikithapa8103]

Brother u have not used the power module why

[@amitlal3817]

bina power module k bhi ESC se APM ko power mil jati hai

[@sudeshk3263]

Power module ke jaruratha nahi he kya

[@princeGupta-df2lw]

In the next vedio GPS setup Krna mam

[@rees5286]

yeah sure

[@shaan29888]

APM2.8 not conect my computer

[@vinaykasarapu8726]

My Quadcopter is flipping while takeoff

[@ajaymule8388]

Anybody can give me information about UAV which has range of 500m to 1km

[@abipaily228]

Range depender on trasnmitter . Flysky fsi6 has 2 km range

[@gaurangsub]

Link in the description is not working

[@rees5286]

which link is not working ?

[@rees5286]

please check again

[@gaurangsub]

@@rees5286 cool I can see it now.. it was the kit link.. working now.. Thanks for the prompt reply.

[@miniseriee]

you have a APM 2.6

[@call4electronics]

No it's APM2.8

[@melvyndsouza820]

am i right?

[@ranjanramekar7586]

Stick mode pe vdo dale

[@rees5286]

we will make it soon

[@technicalchannel6416]

Pl call me when you see my msg for help

[@rikithapa8103]

Sorry sister

[@madeveraam5792]

Women ☕

[@sreejith0982]

dont order from rees52 , these guys just keep a wide stock of products and as soon as u place order , they cancel it from their side and never refunds ur money , i lost my money , i tried to contact them and as soon as they understood that i am calling regarding the refund ,they disconnected and was never able to contact them again

[@rees5286]

Dear sir, kindly provide me your reference order number your problem will be solved eod