Complete Guide to the GHK Airsoft AUG

[@MrFROGY1313]

The kind of review we all want for everything on internet. I dont like the aug but the video is a pleasure to watch

[@clovermedia.]

Idk I love the aug, sure it's wonky but that's why I love it.

[@aimedshadez101]

This was perhaps the single best review i've ever seen for any airsoft replica.

[@LikeTotallyBad]

Its really nice having a gun collector and airsoft collector with all your nerdy knowledge making vids good stuff dude

[@Yogurtstorm]

This video is so so so good! I'd like to see videos about the different GHK models like AK and M4 too :)

[@SpartanJess]

Impressive in-depth walkthrough of the AUG.

[@tenshi6293]

This is what I call dedication.

[@comradequicheairsoft2742]

Awesome job! Makes me want want an AUG now!

[@jerryhenson3916]

I just bought the A3 model, and I am very much looking forward to getting it. Thank you for this.

[@Diactia]

How do you like the A3? I just ordered one from Samoon and I'm curious what you think of it.

[@jerryhenson3916]

@@Diactia It's a little on the heavy side, honestly, but I like it. Still haven't taken it to a game, yet.

[@Utorak007]

That video sold me on getting this, thank you.

[@TaZ101SAGA]

Just received mine, this will be very helpful, thank you.

[@danishhaque3106]

Hands down the best reference for GHK AUG GBBR owners! If possible, can you please explain how to remove and replace the inner barrel/hop unit and how to strip and rebuild the trigger box. I would trust your instructions over anyone else.

[@arnaumarin1631]

The AUG a3 from GHK is good as the A 2?

[@danishhaque3106]

@@arnaumarin1631 everything except the handguard/barrel assembly is the same. But barrel cannot be removed without tools on A3, whereas A2 has a button and cam lock quick release system.

[@arnaumarin1631]

@@danishhaque3106 Do you recommend the TNT uprgade?? And thanks for the info!@

[@danishhaque3106]

@@arnaumarin1631 yes. It is absolutely worth it. Best if you buy the drop in kit with the XPS barrel pre-installed.

[@arnaumarin1631]

@@danishhaque3106 Oh, I though that the TNT kit, included a new barrel. A Maple Leaf barrel could work as well of the XPS right? I was searching for XPS barrel in my country but I could'nt find it...

[@bally7570]

How do you not hav 10 k subs best air soft vid ever

[@SenzoroImpu]

Nice video Pls make how to disassembly trigger box Video

[@lekr4ck3rr76]

Great review!

[@warbird1e1]

This is a great video, ill need to make a part list from your video though for mine.

[@johannesbjerkejannesson428]

Amazing video man! Really detailed and alot of good tips. Any tips on how to make a angled picatinny rail mount like the later models have?

[@sarinoguarneri2457]

That was an impressively great video thanks a lot

[@NegdoshaManido]

My AUG is basically unusable due to friction in the trigger pack caused by the sides of the pack warping inwards. I bought a new trigger pack box, but I'm a bit hesitant to disassemble the trigger pack and swap the bits over to the new housing. Any tips, or perhaps a video on the disassembly/reassembly of the trigger pack? Thakns for all the great videos!

[@mrfischinnsbruck]

This video was awesome thank you so much

[@joppes97]

Amazing guide, thank you for this🥰💯

[@TOTALRECOILAIRSOFT]

THANK YOU FOR THIS! :)

[@shawncrane5234]

Great video. Great information. Thanks.

[@kaiyincheung6227]

Can you teach me how to remove the single/semi switch (Part s/n: AUG 21) for replacement ? Thx very much ! 🙇🏻🙇🏻🙇🏻

[@ixd1942]

Very helpful. Thank you

[@GhostStalkerActual]

Dude, I love the more information than we'll ever need overviews. Any chance you got the GHK 553/1 in the pipeline?

[@fulpsyshmulpsy8099]

Wow! Thank you 🙏

[@liambrown4214]

What sort of gas efficiency can you get out of it? Like shots per mag? And how is cold weather performance

[@Trimflame124]

The button that lets you take out the front of the gun is stuck up how do I fix it

[@milendonchev737]

Awesome video! I have the R904 by Army Armament, which has a built-in scope, but I was looking to mount a red dot on it as a backup. Would you be able to recommend one?

[@vladimiryushenko6086]

No matter how much or how little lube I but ok the bolt rails it still doesn’t seem to move completely free and struggles to return back to the seal not sure what I’m doing wrong or if my aug is just not working well

[@TheCasualSirenEnthusiast]

Everywhere has the steel barrel out of stock. Besides making one myself, any alternatives?

[@TenMilAuto]

Hello I just wanted to know if you would sell the barrel just by it self because I also have the GHK Aug and also wanted to know if you could work on it?

[@MrThordy]

I bought the pdi w hold for my aug. Still got the stock rubber and its kinda a pain to get the the tnt stuff. I hope this will be the best bang for my buck.

[@MrThordy]

i did buy both the 70° and the normal one (both AEG) cause i didnt now which one would be better. but with dh mod probably the 70°

[@HerrSovons]

@@MrThordy Did you have the chance to try them yet? I'm considering the pdi w hold also until I can find a TNT kit.

[@MrThordy]

I did. they do fit and i am very happy with the results :) and its way cheapter then getting the tnt stuff. And i dont think that a barrel would add much for me.

[@johannesbjerkejannesson428]

Again, great video man. Anytips on colour to get the same speil you have on yours? Like the mag or the stock? i have the blacjk boring a3 and would really like the odg or the fde variant!

[@feynmantsai5318]

Question: Thx for the video,i needed this, just one slight issue that my charging handle seems to stuck everytime after fire, any adjustment suggested?

[@redjokegaming]

Taking the sling of on the rrar side hurt my heart ngl, u have to press the button, push the pin in, take of the backplate, oush the button in, take out the pin

[@leosaur_4012]

Ok so I’ve just bought one of these rifles and after inspecting the internationals as you suggested I’ve noticed that the pin holding the brass outer barrel alignment block is missing. The alignment block itself is friction fit quite nicely but should I be worried? I can’t find the pin on Samoon just the alignment block itself…

[@ExplosiveEnterprises]

We'd recommend replacing the pin with a DIY replacement- a nail of appropriate size, cut to length, will do just fine. It's not strictly necessary, but will prevent that locking block from falling out of the barrel or swiveling improperly in its slot.

[@leosaur_4012]

@@ExplosiveEnterprises Ok thanks :) I’ll see what I can find…

[@Ultralight_Lamprey]

Does the TNT hop unit use a proprietary spec? I want to replace the barrel and bucking in mine, but it doesn't have a notch for the VSR bucking. Great video and thank you for pointing out some upgrades I was not aware of!

[@ExplosiveEnterprises]

The T-NT hop unit is VSR-spec, it just doesn't have a slot for the usual alignment tab. If you cut that tab off the bucking you intend to use (preferably sanding it afterwards to get it smooth), you should be able to use any VSR-spec GBB bucking with it.

[@keenanbartlome8153]

does anyone know if the charging handle is the same as the rs? would be nice to throw a manticore or corvus charging handle on it.

[@CanBouiS94]

I’d like to put rails where the foregrip stands. Any idea of where i can purchase theses? ( i’d do my own search if u can tell me the n’aime of what j’me seeking) Thank you for this very instructive video

[@ExplosiveEnterprises]

Corvus Defensio makes a rail which replaces the foregrip. We haven't tried it so can't vouch for it working without modification, but even if it does, it shouldn't be too much work since the GHK and real AUG gas blocks are so similar.

[@landonglauser5340]

Oh my gosh thank you for this video it’s been such a long time since I’ve seen a AUG A1 airsoft gun review this is my favorite reifel model and I love watching anything about it also these things are super hard to find I can never get one do you know anything on how to get one of those?

[@raphaelcfabre3946]

Do you recommend the GHK aug A3? Is it sort of the same set up / functionality ?

[@Adidas_Altyn]

What sight protector are you using on that rmr?

[@ExplosiveEnterprises]

It's a homemade polycarbonate shield attached to the mount rather than the sight itself.

[@gabrielgaitan4856]

@@ExplosiveEnterprises Please do a review of the WE M14

[@TheCasualSirenEnthusiast]

is there any alternative to the steel barrel? all of the ones I can find are out of stock

[@w01f777]

I’m famous 🤣 was my picture at 12:27

[@SemperReloading]

Can you use the real butt plate on the GHK stock?

[@KhoaNguyen-nk4zg]

Bro, I think your aug has problem with nozzle and bucking (at 14 minutes 50 seconds). When you pull the bolt, the nozzle must be held by the bucking rubber until the nozzle is pulled by the bolt's cam pin. When you drop the bolt back to a few millimeters with minimal momentum, the bolt will never fully close because the resistance of the bucking rubber will keep your nozzle and bolt from closing completely. The only way to get the bolt and nozzle fully closed on a properly working gun is to use enough momentum. Please give me feedback if you agree with my opinion

[@ExplosiveEnterprises]

This is a common misconception- the mechanical seal between the nozzle and bucking (or nozzle and mag gasket) is /not/ what keeps the nozzle sealed to the bucking during firing; rather it's the internal pressure within the nozzle that keeps it locked forward while the bolt recoils. An excessively tight bucking can cause feed issues, cyclic issues, or (eventually) tearing. Furthermore, since stock GHK guns use AEG buckings, it's normal for them to not stick at all- the nozzle merely presses against the bucking lips, as on an AEG. To properly test the seal it is necessary to plug the nozzle and pressurize the barrel, and you may find that a bucking/nozzle combo that does not 'stick' at all can still seal perfectly.

[@KhoaNguyen-nk4zg]

@@ExplosiveEnterprises do you intend to buy a case deflector of corvus defensio for your ghk aug?

[@ExplosiveEnterprises]

@@KhoaNguyen-nk4zg Maybe someday, but it's not a priority- and would be significantly more useful on the real AUG.

[@moneymikedawg2419]

Can you change the charging handle to the real steel or is there an aftermarket solution as I have had mine break of twice and I suspect the metal used gets brittle over time and after multiple returns of the bolt and Carrier it creates tiny fractures that get bigger over time and eventually the charging handle snaps off.

[@johnsnow3159]

Hi, I bought the GBB A2 months ago and I'm still waiting to reveive it. In the meantime I wasnt sure a 100% that the Charging handle was plastic or metal. I'm still and was looking to this video to confirm the information. It seems that it's plastic because it is the same color as the foregrip and body. I found and I have bought a metal one online for 10$. If you can confirm that it's plastic and you want the link from where I got the metal Charging Handle just reply to my comment. Thanks.

[@Munishin]

@@johnsnow3159 You got that link big bro?

[@patohajdusek8956]

awesome video , but i have a question is the nozzle compatible with the ghk m4 one ?

[@simonmaser8163]

id say no

[@roughiness]

Awesome Video. I have one question regarding the Devilhunter Mod though. I own a SIG 553 and the magazines seem to be identical to the AUG Mags besides the outer plastic shell obviously. I own both CO2 and GG Mags and the CO2 Mag has a much thicker cylinder/reservoir than the GG Mag. So I am not sure if the Green Gas mag is going to blow up in my face if I do the mod.

[@ExplosiveEnterprises]

Without any firsthand experience with the 553 magazines, we cannot advise filling them with CO2. It is possible that GHK makes a revised green gas magazine that does not use the same reservoir as the CO2 ones. It may be prudent to do some research and see if others have done the mod, and go from there.

[@roughiness]

@@ExplosiveEnterprises I have done alot of research and I cannot find any information on the 553. I've now looked at the CO2 and GG Mag from the AUG and it's the same difference. The CO2 Mag on the AUG is also around two times thicker than the GG one so I'm not sure if it's save on the AUG either.

[@warbird1e1]

By chance do you know what the samoon barrel is made of? I can't find a review of it

[@MrThordy]

The GhK/Sammon ones are aluminium.

[@jony2450]

Hello just wondering if the real steyr scope will fit ghk receiver? thanks bro!

[@ExplosiveEnterprises]

It won't fit without modification, but with a bit of drilling and tapping anything is possible.

[@jony2450]

@@ExplosiveEnterprises thanks bro much appreciated it!

[@pingu.0211]

How’s the rail options for this? Just got an A2 and wondering if I have to go with GHk or if there’s other options

[@ExplosiveEnterprises]

The only rails officially available for the GHK AUG are GHK's A3-styled top rail and the CQC quad front rail, but we've also seen conversions of commercial rails (eg Corvus Defensio, Midwest Industries). FG-Airsoft made an export A2 styled top rail, but they are now several years defunct.

[@pingu.0211]

@@ExplosiveEnterprises Appreciate the info! Great Review btw. GHK should pay you, you convinced me to buy an Aug ;)

[@maX0229567]

Would RS rails fit?

[@EmperorDevilhunter]

Nice video, just missing the newest best upgrade, my CNC aluminium feed lips :P By the way, you can also make my CO2 on CO2 mags by installing a fill valve and letting the empty cartridge in the mag.

[@EmperorDevilhunter]

@GbbJunkie Yeah, they have a screw there, just take it off and put the fill valve

[@roughiness]

@@EmperorDevilhunter Can you use Sodastream with the modified CO2 Mags? I've tried it with a normal 12g CO2 Charger and it doesn't work that well.

[@EmperorDevilhunter]

@@roughiness Yeah, lots of people use sodatream. 12g cartridges are too small

[@EmperorDevilhunter]

@GbbJunkie Yeah, I have for GHK M4 V1 (really old and discontinued) and V2 (STANAG, G5 and GMAG. Newer lightweight and older heavy ones, not compatible between both), GHK AKM, WE M14, WE Mp5, TM MWS and GHK AUG. Soon I will get GHK AK74 and AK GMags, GHK 553, and PTS EPM. I'm also open to new developments.

[@stantheheadhumongous9402]

Bro casually pulls out a real AUG for comparison🥶

[@andrewvelasquez1993]

Is it possible to remove the integral sight from the receiver to add a flat top rail?

[@MrRed_2205]

You'd have to buy the other version, this one is part of the receiver

[@jakobs.7320]

yes you can renove the scope

[@KhoaNguyen-nk4zg]

bro, do you use silicone oil or grease for the guides and bolts?. I just bought a 1000cs viscous heavy silicone oil bottle from Evike for my ghk aug. Can i use that silicone oil for my aug metal components?

[@ExplosiveEnterprises]

30wt silicone oil is good for the O-rings on the bolt; otherwise silicone grease is the best choice for bolts and other metal-on-metal contact. 30wt is 350 cSt so the stuff you have is probably a good substitute for grease; but if it works for you on bolts then go for it.

[@KhoaNguyen-nk4zg]

@@ExplosiveEnterprises Do you often see metal particles or black marks mixed with lubricant on ghk aug bolt guides? I frequently see the lubricant on the guide bar turning black after firing a few magazines, Is this normal for the aug or does my guide have too much friction with the upper receiver? I'm happy to see your video, sorry if my english skills are poor :((

[@bungalarangan100]

Is there any chance to make it shoot 3 round burst?

[@simonmaser8163]

quick question, i am currently running the standard nozzle and I am getting close to 2J when using nuprol red and .33 bbs and now I am wondering how the 1J nozzle works with the DH mod because I cant have more than 1.1 joules on the cqb field. Does it really lower the power below 1 joule even with the DH mod? Also, on the cqb field I am using .2g bbs.

[@ExplosiveEnterprises]

DH mod shouldn't affect FPS much; in some setups it can actually cause muzzle velocity to decrease. A fully broken-in 1J nozzle using .2s should stay below 1.1J even with DH mod. Worst case, the grub screw mod is an effective means of control.

[@simonmaser8163]

@@ExplosiveEnterprises thanks for the quick answer.

[@nikoopperman931]

Fantastic video. Do you have plans for a similar style video for any other gbbs?

[@ExplosiveEnterprises]

We have a few ideas in the works. It might be a little while before we release, though, as we have some significant events occurring in the near future as well as ongoing commercial projects.

[@nikoopperman931]

@@ExplosiveEnterprises looking forward to it 👍

[@jokeygjhin9431]

I have some problems, how to contact with you😢

[@pathfindermorning]

gotta love how the fire control unit on the real one is made of polymer and the airsoft one is made from metal. im sure theres a practical reason for this but i still find it funny XD

[@grilledcheese4017]

Do you know if the ghk augs can take ghk pmags?

[@ExplosiveEnterprises]

No, they're a significantly different design. Even on real AUGs there are a number of changes needed to make AR mags work.

[@grilledcheese4017]

Explosive Enterprises That’s a shame, if they used the same gas system I’d buy one to use with all my pmags. Thanks for the info though, means a lot :)

[@AirsoftNLD]

is it worth it tho?

[@kaiyincheung6227]

Hello. How to disassemble the select fire lever button ?

[@sogerc1]

Okay, so it's just mine. The scope I received is not good quality at all, it's like looking through a mosquito net.

[@LosLos-Ricky]

My ghk aug recoil rod are made of steel no aluminium

[@AWPtical800]

TFW you like the GHK AUG so much that you go out and buy the real thing

[@PeterPing]

Yeah good luck finding the real AUG gas block lmao

[@alex-ti9qe]

Can you sent me the link of the site somoon? I don’t know how to type it.

[@gupta76]

Very nice video!