Complete in-depth how to axle, suspension, and servo mod FMS JIMMY 1/6

This is a comprehensive video going step by step is the process of flipping the suspension of the jimny as well as centering the front axle and bringing the servo from a top mounted position to an under mounted position. check out our Facbook group dedicated to the FMS JIMNY and the ROCHOBBY 1/6 willys
amazon link for the cheapest 1/6 jimny at this time. amzn.to/3OabWhU
/ 431909834954108

[@Der_Alte_Fritz]

Thanks for this video. I lifted mine and my wife's Jimny before I saw this and mine ended up leaning to one side after I was done. Turns out I had reversed one of the leaf springs and you repeatedly mention during your instructions: longer end of the leaf must face forward. That gave me a a clue what to look for. While I did the job I never noticed that the holes were not in the center of the leaves. Took the axles out again today and measured the leaves and sure enough, one of the front ones was reversed. Thanks again for making this important point. 👍

[@RCVOODOO]

Glad it helped 👍

[@robroy07]

Was looking exactly for this. Very detailed and step by step tutorial, thank you very much

[@RCVOODOO]

Glad it was helpful!

[@marzlifestylesari-saristor9560]

Well my grandson said it's a rising car a lot of tools mamalah hehehe... great to see you again brother. 💞

[@RCVOODOO]

thanks marz

[@Jeffsmodelgarage]

Looks way better with the axles switched around thanks for sharing

[@RCVOODOO]

You bet

[@souledoutrc8174]

Nice 👍 video and great information about how you modified your rig

[@RCVOODOO]

Thanks bud

[@josepherickson7618]

Well done great job another super awesome amazing video thank you so much for sharing keep up the amazing work let's get it let's go have a blessed wonderful week ahead brother

[@RCVOODOO]

thanks Joseph

[@krashkingrc9715]

Awesome job definitely makes it look better good to see you back at it. Take care and have a great one sir

[@RCVOODOO]

Thanks bud 👍

[@nathanjorstad479]

Amazing mine will hopefully come it the mail today and will definitely need to do your lift mod they come a little to low to have a true crawl I have the Willys got the jimny for my father thanks for the tips

[@RCVOODOO]

join our FB group is you want lotta nice build to check out in there

[@nathanjorstad479]

I’ll definitely check into it are you guys in the Bay Area I’m from Morgan hill lots of great areas to crawl in the Bay Area

[@RCVOODOO]

@Nathan Jorstad members in there are from all over the world. im personally on the east coast

[@toksvlogs1527]

KEEP safe

[@TheTankRC]

Great mod Thanks for the info

[@RCVOODOO]

No problem 👍

[@3dman875]

I don't have one but a lot of great information about doing this and I really enjoy your video

[@RCVOODOO]

Awesome, thank you!

[@reverserestorations26]

Just did mine and it turned out great, except I can't finish because I can't find a 35mm m3 screw for the steering link. 😅 I might have to order some. Thanks for the tutorial. 👍

[@RCVOODOO]

No problem. Thanks for watching. It's good to have some longer m3 screws laying around. They come in handy

[@TrokaRC]

Very helpful video, thanks! 🤝

[@RCVOODOO]

Glad it was helpful!

[@miklawson211]

I'm hoping to buy the Jimny today if all goes well. While doing the research about this vehicle i found the group the other day and joined. I have all the screws and spacers and a few accessories lined up to buy , the only thing i don't have at the moment is the wheels. I've seen 2.2 inch wheels recommended so i'll be looking for some aggressive tred wheels to fit on in the near future. Great video with usful information, thanks.

[@RCVOODOO]

thanks for watching. feel free to ask anything you need help with in the group

[@miklawson211]

@@RCVOODOO My Car did arrive today and i've been unable to run it as i have every adapter cable except the XT60. I've had a cable made so i should be able to run it by Monday at the latest. I had difficulty taking the front wheels off. Even with the screws undone the hub caps were difficult to get off, once i did it was easy. Setting up the front axle proved to be a pain, i thought that having the diff in line with the drive shaft would be a good idea but that interfered with the steering arm. I have to take some leaves off the back but i'll do that tomorrow after a rest. Now i'm wondering will the car go back in the carry case after the suspension lift?

[@gemlove192]

Good job keep it up😘

[@RCVOODOO]

Thank you 😘

[@ka4172]

SPOA spring over axel many 1:1 Suzuki owners do it for fit bigger tires.

[@RCVOODOO]

helps a lot

[@emersonpedro3944]

Lindo demais 👏👏👏👏👏 parabéns

[@RCVOODOO]

Thank you

[@kennethrobinson9008]

Nice work.

[@RCVOODOO]

Thank you

[@boldrbangr9834]

Great job! Could you swap the front leafs so the short side is towards the front, which should move the front tires forward?

[@RCVOODOO]

Probably not enough to be effective, but you certainly could.

[@acrccrawlers9548]

Awesome brother. Did you get the tires and wheels yet? And any ideas on color? I don’t know what color I’m painting the Willy’s yet?

[@RCVOODOO]

Tires Haven't arrived yet. I think the 19th. . I'm seriously thinking of going with the deep gray and black combo like I did on the last willys build

[@acrccrawlers9548]

@@RCVOODOO cool I’ll send you pictures of the progress on the Willy’s haven’t done much I had a full house duríng the holidays, in laws left last night now I can concentrate a little on the Willy’s

[@FreeMasonKorea666]

👍👀