COMPLETE MAINTENANCE GUIDE For KUBOTA BX Tractors, Step By Step, Every Fluid + Filter

Buy a complete filter kit here: www.amazon.com... JUMP TO A SPECIFIC SECTION BY USING THE LINKS BELOW::
NEEDED PARTS LIST: 01:08
ENGINE COVER REMOVAL: 05:25
OIL CHANGE: 07:46
HYDRO (hst) FLUID CHANGE: 09:51
FUEL FILTERS: 20:43
COOLANT FLUSH: 26:42
AIR FILTERS: 27:22
FRONT AXLE: 29:17
BRAND SPANKIN' NEW CHANNEL MERCH! teespring.com/...
FIND ME ON FACEBOOK: www.facebook.c...
Fan Mail/Business Opportunities/Inquires:
E-mail: [e-mail]
Address: PO Box 349 Candia, NH 03034
Shop my store full of my favorite tech and tools HERE: www.amazon.com...
IMPORTANT SAFETY INFORMATION, PLEASE READ FULLY: This video is for entertainment purposes only. The content of this video include or may include high voltage wiring, moving parts, suspended weights, risk of fire electrocution and many other hazards. These hazards are capable of serious injury, death or property damage and destruction. Consult a with licensed professional before attempting anything you see in this video. Do not try this at home. As an Amazon Associate I earn from qualifying purchases.

[@Trialnerror]

Buy a complete filter kit here: www.amazon.com/gp/product/B00CSBTI98/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00CSBTI98&linkCode=as2&tag=trialnerror-20&linkId=9129bd2f3a43045b23cbde05490c2e39

[@edwh164]

Any info on the cab ? Factory or homemade ? Thanks

[@DuRightVideos]

Very helpful! Great video and clear instructions. With a tractor like this I wanted to make sure that it was serviced properly and thought certified service might be the best route. Your instructions removed my hesitation to do the service myself and saved me a bunch of bucks for labor and the hassle of hauling my tractor to and from the nearest Kubota dealer. Thanks

[@Trialnerror]

Great to hear!

[@mydick7429]

Great vid. Also people remember to lower both your 3 point and fel all the way down when checking hydro fluid.

[@jamesamrein8298]

Just bought a BX2680 and pretty new to the "tractor world". Great video! Appreciate your knowledge!

[@yimh]

Just found this video and subscribed....let me say this my man, this video is hands down the best tutorial I have ever seen about anything on YT. Its not pompous or condescending for guys like me, who are not so smart in this particular area. You video is shot PERFECTLY. No BS, no useless self-promotion, perfect angels, great focus, witty comments, inclusive of all things to consider and comprehensive. I didn't have to FF once. VERY VERY WELL DONE!!! Thank you again for taking the time to put this together and put it up here, it will be my go to every single time I need to do maintenance. My only criticism is that you make me feel inadequate, and by that I mean...DAAAMMMM dude, that machine is so clean, you can eat off of it....I take pride in my stuff and keep things clean, well kept and serviced too, but that machine looks like it just rolled off the show room floor for 400hrs. WELL DONE, you've inspired me to up my game and do the same!

[@gordbaker896]

Perfect if not for the Crap Music.

[@happypantsfarmrescue2017]

Thank you so much for making this video!!! Very helpful to a guy who is automotive challenged!! Very challenged. I am so happy I came across the video...you inspired me to do the 400-hour service myself. Thanks again!!!

[@chrisreynolds307]

Thanks for taking the time to make this very helpful video. The dealer was going to hold my BX2380 for a week to complete the 50HR service. I watched your video and decided to tackle the project. Not sure I would have taken this on without the use of the video.

[@Trialnerror]

You don't know how much I love hearing comments like that. Makes the time spent recording and editing worth it. Thanks Chris and please consider subscribing!

[@hermzinn8740]

Those bolts on the front diff out by the wheels are to bleed the air out of the diff as you fill it. Remove both bolts and fill the diff where you are filling it and it will fill up quickly.

[@MichaelPNW1982]

Thanks for this video!!! Found it last night while researching what I needed to do for my BX2200. Found video, watched it, and knocked the whole service out this afternoon. Took a lot longer than I thought it would due to some unexpected hurdles, but I just came inside from finishing it up. Thanks again!

[@dougsholly9323]

This is pretty old (comparatively speaking), but the information is clear, concise and very complete. I do want to say that your tractor was shockingly clean for 400 hours. Cheers!

[@Trialnerror]

Wow, thanks! Always happy to hear that no matter how old the videos are. Thanks for watching!

[@doncarlton4858]

Your video was 100 times better than the manual! I'm doing a 400 hour service on a BX23S. The manual mentions "oil filter", singular, in all references! The manual has two pictures of filters in different locations. I just assumed it was an alternate location. I wished I watched your video before I started the process. All my local Kubota dealers are closed and I had to get my filters and fluids from local auto parts stores based on part numbers I got from the internet. Thanks again!

[@doncarlton4858]

@@Trialnerror I did subscribe, and look forward to watching your other videos!

[@ddsig2264]

450.00 includes material pick up and delivery at my KUB dealer i did my service after watching your vid . 148.00 and my labor

[@ddsig2264]

I did post my own vid of my service but not as pro as yours .thanks for the reply .i went and back and got UDT 2 and did my front axel and changed my fuel filters also.That was a bath in fuel my vise grips came off but its all done . all thanks to your vid like i said far from smooth but done correct thanks .

[@craigwebb2486]

Loosening the fuel bleed screw isnt necessary when changing a filter. The manual states that turning on the ignition to run the fuel pump for 30 seconds then turning off, repeat a couple times will bleed the air from the ststem. Run engine from low rom to high rpm back and forth until it idles smoothly. This can be handy if you need to change the filter out away from garage and not removeing the engine covers.

[@Trialnerror]

Takes literally 30 seconds and lets the air escape before it hits the extremely expensive high pressure pump. Worth the 30 seconds IMO.

[@dalemarshall9736]

Almost time to do my first 50 hour service on my BX1880 so this was extremely helpful.

[@garagedweller7159]

Thanks for this video. I just finished up the 400 hour service on mine and this was the ticket. I bought the filters on amazon using your link and got the fluid from the dealer. Saved some money. Thanks again!

[@matthewmahl3294]

Awesome video and great instructions. Coming up on my initial 50 hour service and you’re saving me the $$$$$$ from taking it back to dealer

[@arkyump]

I purchased a primary filter relocation kit off of Ebay for that under the seat filter and so far I have been reluctant to install it, now I feel more comfortable to do it because now i know where the damn thing is.

[@bkattic9360]

good job!! i have a bx2230 I bought new in 2005..ive only done my own service since...450 hrs now.

[@cheryllieteau7989]

Thanks. You made everything simple and easy to understand. I feel confident that I can do this myself.

[@bayoudiyer]

DUDE!! Best how to video on youtube. Thanks for your time. I saved it. Its a great refresher before each job.

[@Trialnerror]

BROTATO!!! ;) In all seriousness, thank you for taking the time to let me know it helped!

[@harthmoyer]

This is an excellent video. Has anyone told you that if Mike Rowe holds out for Deadliest Catch (or whatever he's into nowadays) you could slide in and no one would be the wiser! Thank you! You got a like and subscribe! Much appreciated!

[@Trialnerror]

Given Mike Rowe is like a hero to me, can't tell you how much I appreciate that comment. Thank you my fiend.

[@danmellgren9550]

OVER ALL A GREAT VIDEO, THANKS FOR TAKING THE TIME. ONE QUES. ON COOLANT RE-FILL, IF DRAINED AT RADIATOR. YOU SHOW REFILL IN OVER FLOW TANK ONLY, NOT RADIATOR FIRST. GOOD CHANCE TO DAMAGE SOMETHINGS AND WOULD LIKELY TAKE SEVERAL HOT/COLD CYCLES TO RE-FILL COMPLETE.

[@Ringele5574]

I thank you for this video. My tractor did not come with the safety filter, but I will be adding it. Hopefully, when I ask my Kubota dealer for a full service kit with UTD2, it will be complete with all applicable filters and oils.

[@bobadams9337]

Best layout for service I have seen. Many thanks

[@trooper1476]

Exactly what I needed to see so I could service my BX2230

[@maryhyarborough4071]

THANK YOU!!!! I have searched for six months looking exactly for what you have presented. I'd needed to know where the HST screen thing was, since that seems to be my problem.

[@Trialnerror]

Thank you for taking the time to let me know these vid's help people! Means a lot.

[@masoben]

I added this video two my favourites within the first 10 seconds

[@jforo3281948]

Thanks so much, amazing tutorial...after I get all the parts I will be doing your complete service...very plain and easy to follow, this will be my first maintenance since purchased last year (bx2360 w/bucket)

[@Trialnerror]

Thanks for the great feedback man, hope it helps! Good choice on the machine!

[@wessmund]

more confident watching this video rather than just reading from a how to Manuel. Thanks!

[@Trialnerror]

Glad it was helpful!

[@mvinci145]

Thanks for the video! Injust recently purchased a used Bx2670 and wanted to give it a tune up and now I can. Seems doable

[@brianfogg7532]

Outstanding video! I just bought a used BX2350 and your video will be a tremendous help. Thank you!

[@Trialnerror]

So glad to hear that Brian. These can be a pain to film and edit so it's really motivating to know they help. Congrats on your new to you machine!!!

[@robertjames-life4768]

This was awesome thanks! Im putting the aftermarket primary fuel filter on after that waste of time!

[@chipstanley3057]

well done

[@cjhoff9661]

Great info & easy to follow; changed the air & fuel filters on my BX25 this past weekend, will get the oil & HST filters next week.

[@timfalardeau9753]

That torque spec though... Good stuff...

[@DrBetelgeuse]

Awesome, saved me some time hunting for that first fuel filter snd that screen

[@wildbill23c]

Great video, thanks. Just getting ready to do my 50 hour service on my BX2680. I think I have everything I need to do the service, but I may need to pickup another jug of UDT-2 fluid as I only have 1 jug of it and I believe the hydraulic system requires about 3 gallons. I'll stick to the UDT-2 in the front axle for now as well while its under warranty. Not sure if the gear oil would be too thick in cold conditions so I'll stick with the thinner oil for that reason.

[@robertjames-life4768]

So helpful- thanks! I had a hell of a time with that under carriage fuel filter.

[@Trialnerror]

Yea it's a PITA with not a lot of extra line to play with.

[@robertjames-life4768]

@@Trialnerror and if it’s like mine the hose clamp tabs were on top where I couldn’t reach them! Maddening

[@randykniebes5364]

Thankyou very much for your detailed info on fluid and filter changes..... Excellent job....

[@thekid8245]

Thank you much for this video Even after I’ve done a lot of the maintenance to my BX2200 it was nice to see a bit more to learn 👍 Thankfully I have a Kubota dealer in my county 😁 as I do not like buying off brand or “this will work” maintenance products Because there’s a reason manufacturers put their name on lubricants Which is probably why my power steering cylinder weeps cuz the previous owner didn’t use kubota brand !

[@Trialnerror]

Thank you for taking the time to thank me :) It's great to know the time spent putting these videos together actually help people. I appreciate it.

[@robhawkins6018]

THANK U THANK U THANK U.....i tried to use the manual.....very confusing, after all guys dont need instructions right ? This video saved me alot of headache ....Very nice job on this.

[@garywilm4582]

Great video and clear tutorial. I really appreciate the effort. Once again, I learned something new, and some things that I have been neglecting to do properly. Thank you so much!

[@Trialnerror]

Great to hear!

[@KRAZZIEGUYY]

Thanks so much man. Best guide. Serviced 2 bx tractors easily with this.

[@Trialnerror]

Glad it helped

[@personalfunfest]

Your voice sounds just like Tom Hanks ✌🏾

[@RB66_]

Great tutorial but you missed one thing. There's a large bolt towards the rear of the side fuel filter that gets removed to drain most of the coolant from the block. Every bit helps.

[@ThePlowGuys]

Very good. going to save this video for future use. Thanks for the video.

[@stevebusby7331]

Great video!! Thanks for doing this. It's very helpful

[@robertmastria5834]

love the happy Gilmore reference at ~13:30. helpful video. Thanks.

[@shocknawh01]

Good video. Wal-Mart has an oil funnel with a screen and clear tube.

[@shocknawh01]

@@Trialnerror it's all good lol. I just found a funnel at Napa yesterday with a flex spout, so probably better than the funnel in my first comment

[@Tom-ej8bb]

Better the 2nd time!! Thanks!!

[@jeffkluth2201]

Great ! Thanks so much , this was very well done for a layman like myself, much appreciated

[@Trialnerror]

Glad it helped! Have a great day brother!

[@jeffkluth2201]

@@Trialnerror thanks you too. one question on the fuel filter. When you clamp off the line coming from the fuel tank, do you have your vice grips right on the tube, or did you just close the clip all the way ? The HST change forced me to actually remove my backhoe - which is a good thing anyway so I don't back my sweet backhoe into my living room windows for the next 5 months !

[@Trialnerror]

@@jeffkluth2201 LOL on the backhoe, but yes you need to clap the center of the rubber line. May want to put a towel between the vice grips and the hose to protect it but squeeze it good to stop the flow! Good luck man!

[@mikelong9638]

Thanks, Good video.

[@functionalvanconversion4284]

Great video! Very thorough, 👍

[@Trialnerror]

Glad it was helpful!

[@starastronomer]

Great job on the information!!!

[@michaeljulius5895]

Thanks so much for this video- you saved me alot of money and time👍

[@myklewclarke]

Exceptionally well done. Many thanks!

[@davidelo5843]

Excellent video ! very well done ! Thank You will help !

[@tonypopolizio7204]

Great video. Right after watching I was able to change the fuel filters and air filer in about 30 minutes.

[@jamesharless5357]

Great video!👍🏻

[@MiteyMOofyearsAgo]

Very Nice! really appreciate the effort.

[@tobycatron2103]

Great video. Thanks!

[@erichaiduk3053]

Excellent. I should buy you lunch. Thanks!

[@glennboles2869]

Very informative 👍🏻

[@wadepalmeter301]

Just finished watching your video I just bought a Kubota BX 2360 with 400 hours on it and want to do a full service on it, this video help me out a lot. Also how many Liters of oil and trans/hydraulic fluid does it take thank you.

[@Trialnerror]

Congrats on the new toy and thank you for the thank you! I don't remember the exact amounts but I want to say oil was 3.5qt and a complete flush of the HST was close to two gallons but I could be off a bit.

[@billm5215]

Fantastic video- Thanks so much. very well done.

[@Trialnerror]

Glad you enjoyed it and I hope it helps you. Thanks for watching and please consider subscribing!

[@warrenb9343]

Great video and info. I was not aware the coolant had to be changed. My BX is 6 years old. Manual says to change every 2 years. I have just over 100 hours. My manual says to drain the coolant, run some cleaner through, drain and replace with coolant. I can't see how to get to the drain plug or the lower hose. Did you run cleaner through the cooling system? Is it really important to do that?

[@lcswartz49]

Yes sir I have a BX 2360 and I’m losing hydraulic fluid I’m not sure where it’s coming from it’s not coming from a knuckle I do know that I believe it’s coming from a Power steering on can you show me how to replace or do you have a video on how to replace a power steering line on a BX 2360 and I am a new subscriber to your channel

[@mcroteau91]

Correction on the torque spec for that screen filter Bolt. The manual says it's 3-4 ooga dooga's.

[@danielperez-wu6qq]

Great job.

[@Trialnerror]

Thanks for watching!

[@tomdoty8334]

By raising only the rear wheels to facilitate easier draining of HST Fluid, doesn't some of the fluid run forward, and not drain out?

[@buckshot3ttt]

Very good!! Thank YOU

[@gatesj777]

This is really helpful overall and appreciated, but did you really use an impact wrench to put the oil drain plug back in?

[@gatesj777]

Trial N' Error is that one of those little wrenches you can turn way down? I have a whole range of them and anything but the smallest couple I’d be afraid of destroying the threads or knocking the little spot welded insert on the inside of the pan loose.. (never saw the inside of this pan but numerous automotive pans I’ve ever seen are made like this).. personally I like to at least “feel” with a hand tool if I’m getting it tight enough without overtightening. Overall a great video, best one I’ve found on this subject and I don’t want to sound like it’s not appreciated. Especially the hydro fluid change. Thank you for putting it up!

[@skeets6060]

I find that if you clamp the hose above the last filter and then pump the fuel on fill the last filter push the line back on I ont have to bleed anything as if there is any air inthe lines it will push it through now worries,, a very good video

[@mahinderkumar1195]

skeets altwriiusDZcvhkwigueo

[@chuckquinn8026]

Very well done. I’ve heard others also say to use 90W gear oil instead of UD2 in the front because of seal issues. I will do the same at 50 hours. Nice to see bleeding the air from the fuel supply. Unless I missed it, do you open the low point drains on both sides of the HST along with the main drain? I hear you can get more fluid out that way. Also like the inner air filter element. Good idea. Great video for us new owners (BX1880)...

[@duckhunter8387]

My dealer said any 90W

[@thekid8245]

Hey it’s me again lol I just wanted to say and point out on the Dual fuel filter change. I have a factory service manual I bought thru the kubota dealer And on my older BX2200 the manual points out how the fuel system needs to be bled after yada yada but doesn’t say to break the bolt loose ! it simply says turn key and let pump run for 30 seconds and turn key back to off then start ?? I was like ...WHAT ?! But it worked !? I’m old school and I “like you did” would of purged the system Like any diesel in the past ... just wonder if it’s something kubota simplified only on their Diesel engines ? ... head scratchin lol

[@camreed7073]

good video thank you brother

[@stone8597]

Thanks...great video.

[@richardw3377]

Filters are tight and difficult to remove the first time because the factory assembles them dry.

[@davidpriest7449]

Great video thank you

[@abdulqayum4840]

Thanks. Great info.

[@tbhollywood]

Great vid! Question... what would happen if you OVER fill the front and back trans fluid?

[@PaulSmith-tf9bn]

Lots of great information, however I would like to know how to pull the Pulleys off.

[@CrazyCanuckFitness]

Awesome ! Thank you

[@Trialnerror]

You're welcome!

[@danleblanc5872]

I don't see where you list the part number for the inner air filter. Can you share that? Thanks in advance.

[@Ekeenan86]

Did you ever find this part number?

[@kevinhewitt1428]

Apparently another AvE fan. Good instructional.

[@davidparadis490]

Amateur hour compared to AvE

[@rudedawg5087]

Awesome video, thanks. I am strongly considering a Kubota BX1880 and have a couple of quick questions: I could not see it very well but you mentioned a skid plate on the hst and wanted to know if it's substantial enough to guard the hydro filter & fan? I've seen other brands that have had issues with limbs, etc. actually breaking the filters off which resulted in the mfg. (Massey GC for one) to design a better guard. Also wanted to know where you got the rear tire lifts to raise the rear which aided in the hydro servicing. Thanks in advance.

[@madebylife]

this is probably the finest video I have found for servicing the BX. Thank you for taking the time to make it sir! As a side note, I was so worried about the fan, filter and other important sundry parts being damaged or bifurcated on my heavily wooded lot that I bought under-armour from Bxpanded. I will never use the mmm so it works out perfectly. It attaches to the MMM points and takes 30 seconds to remove for servicing.

[@jimnancybarrett801]

I have a BX2680. What radiator fluid do you use? Do you drain the radiator and the block? My dealer indicates that they use Zerex Original Green and they do not sell the Kubota Genuine Coolant. However, I cannot resolve whether the Zerex meets the same standards as the Kubota coolant. I called Kubota but they do not have a clue. Interested in your thoughts and experience. To order the Kubota coolant costs more for shipping than coolant. Thanks BTW your KZbin video is outstanding.

[@michaelmactavish1728]

our zd 326 has the same guard but still easy get at the oil filter wich i love kubotas they make the life easy for serviceing on wich newholland and john deere there a major night meirror to service on wich i had problems servicing the newholland wich have to tear pretty well whole tractor apart to servicing it wich is a pain new hollands

[@ad356]

im buying a BX 2350 390 hours on it, comes with heated cab, 54" mower, and a 3pt snow blower. i am paying $8500. i just hope its a solid well built machine, i really cant afford new. i am reading the 2350's have their quirks. its hard to turn down a lower hour tractor with heated cab, and a snow blower, and a nice 54" mower. the mower looks like it hasnt mowed much grass. it still has some factory paint on it. i think whoever had the tractor was mowing with a zero turn and used the tractor mainly for snow removal.

[@ad356]

@@Trialnerror so the BX2350 is still a decent machine? of course i will service it properly. my daily summer driver is a 1996 camaro Z28..... it has 249K on it and will still lay rubber for a city block if i feel in the mood. that car didnt get there by lack of oil changes. for my tractor i going to get a notebook, and probably change all fluids and fully service..... document all of it. i see you used 10W40, i thought diesels should get the 20W50, same oil used in a diesel truck ( i drive milk tanker)

[@surprisesurprindesorpresa2905]

Hi, I have a a B7 100 Kubota with a front loader that seems to have a separate reservoir for hydraulic oil. I am having a hard time finding videos for the B7 100. Do you guys happen to have any videos for that specific tractor?

[@duckhunter8387]

Great job! My local Kubota Dealer (friend of the family) told my father that their is no need to change the UDT unless it starts to turn Milky. Can I change my Filter and check Screen without draining? Thx.

[@Trialnerror]

You can but you're going to lose at least a couple quarts checking both. At that point, you may as well just change out the fluid. You can run old fluid but it looses all the viscosity and the metals needed to keep the HST pistons lubricated. If you wait until it's milky, you've already damaged the pump.

[@duckhunter8387]

@@Trialnerror Appreciate it!

[@duckhunter8387]

@@Trialnerror Im looking at purchasing a used BX2200. I wanted to check the screen without having to provide the seller with aa few new gallons of UDT. LOL

[@oldschoolrepairshop2866]

How much coolent did you use in the engine and what coolent dose it take? Love the video

[@eldinpeterson3760]

thank you for all the information , is there a substitute for the transmission oil instead getting it from dealer, like ams oil. what are the specs that i would look for in a different oil. thanks

[@2002van]

Hey great video ! Thanks I'll give it a try next week for the first time, I'm sure with you step by step I'll be ok. I have a bx23s with a backhoe, I'll remove it (the backhoe) to do the work but that will mean leave "old" oil in the cylinders, will that be a problem ? I have some experience for something similar in my bike and car when changing brake fluid for the abs pump, and it has to be kind of done twice to remove it all, but I guess this is not that delicate.?

[@2002van]

@@Trialnerror Thanks for your reply! Ok that is good to know. I did everything last week and it went great.

[@mitrekab833]

@@2002van I have a BX23S and getting ready to change hyrdro so have same question but didn't see any reply. So did you not worry about the fluid in the backhoe lines or change the fluid twice?

[@2002van]

@@mitrekab833 Hi I don't know where his reply went 🤔 , basically he said , don't worry about it. The amount of "old" oil is not that much so is not worth flushing it twice. Hope it help

[@SimpleLife1971]

Thanks for all the great help! I did notice the engine oil "appears" to be a standard SAE 10W30 but not specifically for diesels, am I seeing this correctly? Is it safe to use conventional motor oil such as Mobil 1 10W30?

[@Trialnerror]

I've always run it with no problems but I'm sure there are purists out there that will point out some unlikely scenario where it's a problem. This is the internet after all :)

[@Axer940]

Great video, any tips on loosening overtightened hst plug??

[@Trialnerror]

Little bit of heat and an impact gun if you happen to have one. Thanks for watching!

[@Axer940]

Thanks for quick response, broke down and bought breaker bar which did the trick in about 5 seconds. Thanks again for this video! Just completed second service on my bx2380 with this video playing in background (music not that bad lol)!

[@jesspatrick2]

If the tractor has a front end brush guard/grill guard and/or front ballast weights, those have to come off too before the engine cover can be removed.

[@Rob-pb8tp]

It will be my first time but I have the confidence I need now! Thanks, great video! Oh, I'll also be replacing my water pump (@*!%#)

[@steadyeddie7453]

How much gear oil did it take to refill the front axle housing?

[@wallyborni4411]

Hi, I have a 2380 and wondering what should I do for the 100h service, the app (manual) said u only need to check things up but for some reasone doesn’t make sense for me, any idea “help “ Thank you