Complete tool list for coin ring making

Check out my coin rings for sale! www.changeyouca...
Forged : Coin ring making for beginners
www.amazon.com/...
Jason's Works center punch
www.etsy.com/l....
Jason's Works reducing dies
www.etsy.com/l...
My video: Specifics of my punches and dies
• Specifics on my punche...
Dapping block
pages.ebay.com/...
Mandrel
pages.ebay.com/...
Large mandrel
pages.ebay.com/...
Ring stretchers
www.waymil.com...
6 ton press
www.harborfreig...
Mallet
www.harborfreig...
Punch and die set
www.harborfreig...
Punch alignment cards
www.etsy.com/s...
Ball bearings
pages.ebay.com/...
Rathburn ring stretcher
pages.ebay.com/...
Half round file (file set)
m.harborfreight...

[@MountainAirOrganicBeds]

Nice you have a list and made videos. Looking forward to learning more.

[@DetectingMyrtleBeach]

Thanks for making these videos. I bought the Kennedy Half from your website for my wife as a christmas present. But more importantly through your videos I've picked up some tools and my 12 year old daughter and I will be attempting to make some quarter rings for other family members for christmas presents as well...looking forward to working with her do do that...should be fun. With your videos we're pretty confident we should be able to do this and make some unique gifts.

[@CoinRingsfromTheMint]

That is great! If you run into any difficulties let me know.

[@davida694]

kentuckyclassr

[@jewelvibebabo]

much obliged for this information.I totally agree with your attitude to the cost of tools.Yes they can be expensive.But some people have very damaging hobbies that cost huge amounts of money.Keep up the good work and keep the faith!!

[@CoinRingsfromTheMint]

+jewelvibebabo Thanks!

[@josepacheco1115]

Thank you so much for the lists... I will be saving for the advanced list. It should be fun making coin rings. I can hardly wait. Thank you for the video Skylar best wishes to you.

[@CoinRingsfromTheMint]

+jose pacheco Right on thanks for the comment!

[@blackphantom99]

Another great video Skylar! Very informative for everyone not just the beginners. Have a great weekend mate. Will

[@CoinRingsfromTheMint]

Right on will, thanks for the imput! It is always appreciated

[@MrWhoDatIsMe]

You guys are fricking killing me. I have so much other stuff I need to do first, and you make a damn list of exactly what I need to do this stuff. I'm so wanting to do this because it's such a COOL way to!

[@CoinRingsfromTheMint]

+Matt Whitehead lol!

[@davida694]

Thank you for posting what you have learned about coin ring making ! You have been a big help. David . Boise Idaho

[@CoinRingsfromTheMint]

+David A Thank you!

[@이웃집고양이루루]

Thanks man! Your videos are always good and helping me out a lot!

[@CoinRingsfromTheMint]

+S. Ghim Right on, thanks for the comment!

[@mikerussell6212]

You are right a man is only as good as his tools

[@montneymon-ta-knee6810]

but a good man can use the tools he has an get the job done LOL

[@awesome52981]

Skyler, thank you for the fast response. I will definitely check that out! I have found that postage is the big killer from the UK. I have 40 tall ship half pennies coming, they cost 5 AUD, but 23AUD for postage! thanks mate!

[@CoinRingsfromTheMint]

+Jon Coleman That is the problem with international shipping

[@awesome52981]

Skyler, as a side note: What are your thoughts on this punch kit www.sunsetcrystals.com.au/disc-cutter-set-of-14-round.html As harbor freight is quite expensive to ship items to AUS, i am looking local. If this set is not appropriate, I will probably be looking at Jasons Self Centering Punch Kit, but would like to avoid that cost for as long as possible. Cheers.

[@CoinRingsfromTheMint]

+Jon Coleman It looks great except for the fact it doesn't look like you have clearance to put a centered hole in a coin with the middle punches.

[@awesome52981]

Skyler, I didn't take that into account when looking! Thanks for that. I ended up ordering a set similar to the Harbor Freight model. Keep up the good work, mate!

[@patman0250]

Well considering Jason's worx tools are insanely expensive now you looking at way more than $1,000. It's almost $1,000 just for his punches, 60 bucks for one small backup punch.

[@snesguy9176]

I almost paid $70 for a certain coin ring on ebay, ended up researching them and ended up here. Well, I jumped in. I planned to get some of the basic tools for fun, then ended up spending $200 for the intermediate kit plus some extras. Hoping I can sell some rings locally and break even =P I'll be building a portable workbench tomorrow (end table size) while I wait, needed a work space for making models in an apartment anyway.

[@CoinRingsfromTheMint]

+Snes Guy haha it sounds like you caught the bug

[@snesguy9176]

haha you're up replying to comments this late? Like any new venture I'm overly excited. I have pretty bad depression and if I don't have a project I enjoy everything goes to hell. ¯\_(ツ)_/¯

[@CoinRingsfromTheMint]

+Snes Guy lol yeah I can be a bit ocd about comments at times. I should stay off my phone :)

[@rwillliamson]

@snes Guy how's the ring making project coming along?

[@CIAG4PNP]

Great video with good advise !

[@DROY2004]

Thnx for the break down info, God Bless

[@CoinRingsfromTheMint]

+Dan Roy you are very welcome!

[@1969roscoe]

I used the tear drop mallet on my first ring and it put a mark on the edge that is still there

[@CoinRingsfromTheMint]

Wow that’s a hard mallet! I use a rawhide mallet more. They don’t do that

[@redroadrunner1545]

Thanks again for all your info. Your video are very inspiring. I just ordered all need after my trip to harbor frieght. Next is the ring stretcher. We will see how it goes. Also I saw you do classes?

[@CoinRingsfromTheMint]

Yes I do! At the moment it is just one on one classes.

[@kenwright2450]

Well said and ty very much kind sir can't wait to get started

[@CoinRingsfromTheMint]

+ken wright Right on, have fun!

[@RoundheadRecords]

So I have bags and bags of silver coins from collecting over the years starting when my dad was in the theater business - I have mercury dimes - lots of half dollars - lots of quarters, all in a separate hidden location. H

[@josephrobbins2830]

Love the I love Jesus sticker in the background brother!

[@CoinRingsfromTheMint]

Right on thanks!

[@UltraAar]

@@CoinRingsfromTheMint Same! Jesus is the best!

[@jessicaasaro2604]

So helpful!! Thanks!!

[@cigardude64]

This video is 3 years old. I would like to know if there has been any upgraded or new or easier tools you could recommend.

[@ericstorey2948]

the groove in the mandrel isnt for a ring with sets its for seeing how big of piece you need of stock for sizing rings

[@CoinRingsfromTheMint]

+eric storey oh ok. You learn something new every day :)

[@ericstorey2948]

wasent trying to be a smart a-- about it its just i use one every day for ring sizing i wish my rings came out as good as yours mine are just not quiet making it yet to look like yours

[@viauyeung]

You need to make another video for the extreme poor man build list for less than $300, I just want to make a perfect penny ring!!

[@laithrabie1557]

Hey man awesome video it just I'm really young I'm 14 ,and I really like this but I don't think I'll get my parents to buy all this for me

[@summon1456]

Well your 19 now ! Get out and get a job and buy them !!

[@tomking3942]

I see what you can make if you have the skill so the investment of a thousand is right in line. That is s good return for that kind of investment if you are serious about making rings. If not just buy a ring.

[@chestercopperpot2219]

Why don’t you just cut the hole a little smaller then the actual ring size and stretch it on the mandrel? Why would you need any of these tools to begin with? What am I missing here?

[@anchovyal3606]

About how much did all this equipment cost for making coin rings

[@overload889]

I used the 9 piece punch and die set to make my first ring and the plastic top broke. I got one ring out of it. I've been looking for an alternative to the center punch method, maybe a drill press or something. I still have the broken punch set (the punches are fine) in case I find a way of mending it, but I would advise against buying this tool.

[@CoinRingsfromTheMint]

+overload889 It is really important to make sure the top and bottom plate are lined up or bad things can happen for sure but for the price it is a great tool. It just takes some extra attention.

[@overload889]

That might be what went wrong, or that I was using it on the wrong surface. I saw fencekid use it on an anvil, which at the time I didn't have. I used it first on a wooden bench top and then on a concrete floor. Either way, it didn't end up being worth the investment for me. I guess experiences vary.

[@andrewjackson3278]

Man all I use is a 25lbs dumbbell, a hammer, a corded drill with a small drill bit and a round file. Ain’t the prettiest ring ever but it has no jagged parts and it’s shiny and perfectly round

[@CoinRingsfromTheMint]

Right on! I have a few of those too. They were the first rings I ever made.

[@andrewjackson3278]

Coin Rings from The Mint - Change You Can Wear XD I’m going to a Motionless In White concert next month...i’m gonna fricken make one and take it to the singer during the meet and greet!!!

[@CoinRingsfromTheMint]

Andrew Jackson Right on!

[@ktodoma]

great info i have the 6 ton press only problem is that its keeps on leaking oil i refilled it a few times but still leaking did you have any problems with yours leaking ?

[@CoinRingsfromTheMint]

Yes mine leaked when I first got it. It more or less stopped now. I almost put a nice bottle jack in there but never got around to it.

[@RoundheadRecords]

2 So how do we connect with my coins and your equipment and make money? I have money in the coins to so make it equatable. You make and market and I make money - tell me how.

[@kenutton992]

how much is your total kit ?

[@andrewjohnson6404]

Did you post any dimensions for the tools like auto punches or the Dapping Blocks? Thanks for the video!

[@CoinRingsfromTheMint]

No I don't. My new tool list video might be better than this one. All the dies have dimensions on them as far as opening size and degree of angle.

[@Road_Rash]

If you think you want to do something, but don't want to invest in tools, then you really don't want to do it. Tools are necessary and have to be bought. When you weigh the cost of tools based on the potential income generated, it's a meager expense. There's an old saying: you have to spend money to make money!

[@CoinRingsfromTheMint]

Truth!

[@Road_Rash]

Btw, thanks for the inspiration! I'm gonna add coin ring making to the list of hobbies I enjoy. If I like it enough, and start generating a little money from it, I may try my hand at casting too! Love your channel!

[@yndiaofernandes1925]

Amigão como eu faço pra comprar todas ferramentas

[@detectorismonordeste8651]

Quero saber tambem amigo

[@johnmcalhany41]

Hey man! Thanks for the vids! Subbed here! This seems like a very cool side gig that id be interested in. How much would you recommend to sell pre-1964 quarter and half dollar rings?

[@CoinRingsfromTheMint]

That is a good question. It really comes down to when you are getting started the price will be lower. I started off selling silver halves at $35 and silver quarters at $25 I think. When you get all the details down (the devil is always in the details) you can start to raise the price up. Thanks for watching!

[@armlann]

The die you used to start the process, was that from your ring sizing machine? If not, do you have any details on it? My JH kids will like this so I'm making a tool list. I like Jasons punch but it's a little pricey for my school budget. Nice video!

[@CoinRingsfromTheMint]

Yep it is from my ring sizer.

[@RJ67.]

Hi skylar , Great informative videos all of them!! I was wondering when you first started out..what is the demand for rings? Is it a high demand or just one here one there I jammed up my knee pretty bad at work and I am looking for a way to make some income at home while I heal that i can do at my own pace... . Like anything else I do realize that quality work attention to the smallest detail are the best advertisement via word of mouth I guess what i'm asking is how long did it take to get your initial investment back ?

[@CoinRingsfromTheMint]

It started slower but it increased pretty quickly. I Just started with a mandrel and a mallet. I drilled holes instead of punching them. That meant my initial investment was about $20. Every time I got enough money from sales, I would buy a new tool that I thought I needed. Within the first year I had built up most of the methods and tools. The main ways I sold them was on facebook buy sell trade pages, craigslist, a saturday market, ebay, and etsy. The more places you offer them, the more you will be able to sell. Hopefully that is what you were looking for. Thanks! Skyler

[@scattershot3699]

QUESTION: The 17-degree angle in the folding dies - is that "17 included", or "17 per side" (34 included)?

[@CoinRingsfromTheMint]

+Scattershot it is 17° per side

[@phoxhaus5686]

Quite the investment. Wish there was an economy package...

[@anthonymazzola1780]

Hi, I have been checking out the ring stretcher and reducer that you show. I'm a little nervous because of so many negative reviews on it. Would you happen to know about Duke, It looks like yours but it's made in Italy ?? The only draw back the scale is in Hong Kong sizes.

[@CoinRingsfromTheMint]

I have never heard of that one. To be honest most stretchers will work. The scale makes no difference because it never is right anyway :). The cheap ones work fine if you know going in that you will need to get the dies smoothed out and you will need to fix the handle in some way. That is their main drawback that gets the negative feedback. They are low end for sure.

[@ronandnancyfarris7359]

My husband has the ring stretcher you have, but he has 2 problems! One is he lost the ring that goes at the top of the stretcher, two is that 2 of the long sections of the stretcher broke! Can he buy replacements somewhere , and do you know where?

[@CoinRingsfromTheMint]

Unfortunately I don't know where to get replacement parts. I have had a few break over the years and I just buy a new one and use the old one for spare parts.

[@saulogomez279]

Hola que tal me gustan mucho los anillos que haces cuanto cuesta un soy de Mexico

[@CoinRingsfromTheMint]

Gracias. Tu puedes ver mis anillos en www.changeyoucanwear.net. Envío a Mexico es solo $4. Lo siento, mi español es malo!

[@larrykelley1818]

What happened to the link with the book

[@ronandnancyfarris7359]

Thank you anyway!

[@xucaen]

I have invested in the step drill bits, nylon mallet, a file set, and a vice. Sincerely, I can not put much more into this until I learn the basics. But I am missing one vital component to my setup - something to start the hole on the coin for my drill bit to bite into. I tried using a nail, and it seemed it would work, but when the drill punched through, it somehow pushed the drill and created a hole off cente. In one of your other videos you used some kind of punch to start the hole in your coin. What is that called so I can find it on harbor Freight? Thanks!

[@CoinRingsfromTheMint]

It is just a center punch. The main issue you will have a problem with when it comes to drilling is that it commonly is slightly off center most of the time. A punch and die set like the one at harbor freight will be more of a sure thing than a drill for sure.

[@xucaen]

Is it this one? www.harborfreight.com/spring-loaded-center-punch-621.html

[@CoinRingsfromTheMint]

Yes but I have never tried a spring loaded one before.

[@xucaen]

I don't even know yet if I can do this. I'll have to stick with the nail/drill bits and I can actually make a ring. The punch set it too costly for me as I am unemployed.

[@CoinRingsfromTheMint]

Right I understand. That is how I started too :). You might hsve to just file them back into center again. That is what I always did.

[@dagodigger487]

Fantastic

[@CoinRingsfromTheMint]

+Dago Digger Thanks!

[@jimiclearity1697]

hey if you get the durston do you still need to get jasons starter kit or should i just get the punch set and the durston? im starting out and want to get good stuff just dont want to overshoot it

[@CoinRingsfromTheMint]

The durston definitely won't replace the starter kit. I would skip the durston bow pepe tools is making a much better stretcher. I'm going to be updating my tool list here soon.

[@654rebel]

Skyler how do you know what size ball bearing to use for folding each coin. I have been checking your video's I can't seem to find the answer. I would be making dollars, halfs, quarters

[@CoinRingsfromTheMint]

The info should be in the description box of my quarter, half and dollar videos. Thanks! Skyler

[@MrSkooby4]

Hi Skyler, thanks for your amazing tutorials! Just a simple question: Do you need ball bearings to use the ring stretcher-reducer? I have seen people re-sizing their rings using a ball, and some simply pressing the ring without it. What is the best option and why? :)

[@CoinRingsfromTheMint]

+MrSkooby4 I don't use a ball bearing when sizing. You do use a ball bearing or a folding cone when coming through coin out initially though.

[@CoinRingsfromTheMint]

+MrSkooby4 *you use a ball or folding cone when coning out the coin initially... spell check got me :)

[@nicolaeb3942]

Hello, is it ok if the mandrel is only marked (like... "painted" with circles and numbers), or the circles-numbers have to be carved in? So only "painted" on it, or carved so you can feel the small " laser cuts" for the circles and numbers? I guess i can't give links? Thank you!

[@CoinRingsfromTheMint]

+Nicolae B Sure that would work just fine.

[@jackiedavies3751]

I am having a hard time finding a punch and die set here in the UK at a reasonable price (I am sure the plane tick to the US to buy tools would be cheaper in the long run :) ) would this one do the same job 14 Piece Hydraulic Punch Driver Kit, Thanks Jackie UK

[@CoinRingsfromTheMint]

I am not sure, do you have a link?

[@jackiedavies3751]

+Coin Rings from The Mint - Change You Can Wear www.ebay.co.uk/itm/10-Ton-Hydraulic-Knockout-Punch-Driver-Kit-Hand-Tool-Conduit-Hole-6-Die-12-50mm-/221766558666?hash=item33a25123ca:g:q6IAAOSwuTxV-B~B

[@CoinRingsfromTheMint]

That doesn't look like a tool that would work unfortunately.

[@1BigMonkey]

Can I ask what you think of Pepe Tools? Just wanting to get started and they seem good.

[@CoinRingsfromTheMint]

+14Wiccan The tools themselves are great.... Rio Grande is a great tool manufacturer also.

[@jasonraley2971]

Do you wear gloves during the annealing process, or are pliers sufficient. Also is a welding blanket required or will a cinder block be fine. Thanks :)

[@CoinRingsfromTheMint]

+Jason raley No gloves but safety glasses would be helpful. A cinder block is not best because the heat can cause it to pop and get you in the eye. I usually use a fire panel

[@jasonraley2971]

+Coin Rings from The Mint - Change You Can Wear do you know where to buy fire panel, or will a welding pad over concrete suffice. I'm just starting up so I apologize if my questions are common knowlage.

[@CoinRingsfromTheMint]

+Jason raley To be honest I would just use a paving stone and wear safety glasses. My family makes fire panels is why I have one.

[@samuelmachadocerqueira7754]

OI ME MANDE ESSE ÁUDIO EM PORTUGUÊS BRASIL

[@willanski4321]

Hey. I just got that blue stretcher/reducer from Amazon. Pretty decent for the price although the die sizes are tiny?! Maybe I'm making big rings but nothing fits in there. Are these the standard sizes for these sorts of dies? The Amazon listing had no specs. Thanks 🙂

[@CoinRingsfromTheMint]

+Willanski Yes they are all that way. The dies are always bad but The stretcher itself is great. Most people buy Jason's dies and use them with it. jasonsworks.com

[@willanski4321]

Coin Rings from The Mint - Change You Can Wear yeah very impressed with the stretcher! Think I need to invest in some specialist dies then! Thanks, chris

[@blueblue8357]

Can I use a half ton or 1 ton press for smaller coins? (Like half dollar coins and smaller)

[@CoinRingsfromTheMint]

A 1 ton works just fine.

[@thomasmyers8302]

Hi Skylar, I am about to by a ring stretcher. does the cheaper one work well after the handle fix, or should I get a higher end one?

[@CoinRingsfromTheMint]

The Chinese one is fine. If you can get a better one you would be better off though. The Chinese die also is rough and will need smoothing out. I used a Chinese one for 2 years so they can do the work after those 2 fixes.

[@nickdixon9535]

Question: Isn't destruction on US currency illegal?

[@CoinRingsfromTheMint]

Nope :) Here is a link from the treasury explaining it. Check the bottom of the link. Thanks! Skyler www.treasury.gov/resource-center/faqs/Coins/Pages/edu_faq_coins_portraits.aspx

[@jwcollect6642]

Hi, If you were starting over today what equipment would you buy? Thanks

[@CoinRingsfromTheMint]

+JW Collect I am actually going to be doing a great serious beginners setup video here soon. Stay tuned!

[@jwcollect6642]

Great, thanks. I look forward to seeing it.

[@randyacosta3268]

Where can i buy machine n making a coin ring.

[@marcusmckenzie9528]

I wonder, does this equipment work with australian coin sizes? i suppose i should find out before purchasing. Or perhaps there is a site specific to australian coin rings?

[@CoinRingsfromTheMint]

+Marcus Mckenzie All the tools work for Australian coins with the exception of the mandrel. You can find mandrels that use the UK Australian letter scale.

[@marcusmckenzie9528]

Tyvm for such a prompt reply was not expecting one so soon :)

[@CoinRingsfromTheMint]

Marcus Mckenzie You are very welcome. I try to be prompt as much as possible :)

[@kathleenfox6044]

The Dabbing block no longer is there .Where can I find another one hon ?

[@CoinRingsfromTheMint]

You can search ebay for a good one. Just be sure it is steel and not brass. Thanks!

[@kathleenfox6044]

Okay will do , thank you !

[@DROY2004]

Since I made my last post the Holy Spirit has put in my heart to offer encouragement to M' Lady bc I strongly identify which the life of a pagan in her, I've been there I know. I offer this prayer for you, that God will send the Holy Spirit to you with & the power of His Word & you will see plainly your helpless enslavement & receive the Lord's Gift of his blood bought Salvation, I make no judgements bc God made no judgement on me but Grace was given in abundance & so I give to you. God loves u, so to pray for your salvation Our wills must be together, bc he loves u, I love u. God Bless

[@CoinRingsfromTheMint]

+Dan Roy That was a great post. Thanks Dan.

[@hookaburns77]

I just bought near new Kagan for 250 bucks on eBay. I think I lucked out XD

[@CoinRingsfromTheMint]

That is a great price!

[@hookaburns77]

+Coin Rings from The Mint - Change You Can Wear I couldn't believe it when compared to what they list for retail. If you can even find them. Wonder if they knew what they had?

[@CoinRingsfromTheMint]

That is a good question. That price isn't much different from a Chinese one

[@hookaburns77]

+Coin Rings from The Mint - Change You Can Wear is it still possible to size half dollar rings with it due to the clearance or would have have to use an arbor press and dapping block?

[@이웃집고양이루루]

what is a kagan? :D

[@bigred3096]

I noticed that the presidential dollar ring only goes to size 11... Can it be made for size 12 or 13?

[@CoinRingsfromTheMint]

Going that large tends to stretch them out too far and you lose detail.

[@bigred3096]

Coin Rings from The Mint - Change You Can Wear Thanks my good man... Do you do any type of Affiliate work with the sales of your rings?

[@CoinRingsfromTheMint]

What do you mean exactly?

[@bigred3096]

Coin Rings from The Mint - Change You Can Wear If I were to bring you customers/orders for any of your work; would you pay me a 25% finders fee? Or as an Affiliate, would you sell me your work at 25% off of your retail price? ...A $50 item to me would be sold for $37.50 as your Affiliate! ...Or as a 'finders fee' you would simply pay me $12.50 on the $50.00 item for the buyer I bring you... This is just a couple of ways for you and I to make some extra money... Just a thought!

[@CoinRingsfromTheMint]

+Big Red! ok I understand. Actually I stopped doing wholesale a while ago because I was working myself silly. Sorry!

[@justwondering786]

Where did you get the stone that you are showing ?

[@CoinRingsfromTheMint]

It is just a paving stone I got at Lowe's.

[@Imwright720]

I spent close to 100k for tools for my job. 1k is nothing if your making money at it.

[@jeffm3065]

why is a grooved mandrel bad to use?

[@CoinRingsfromTheMint]

Because it will create a ring that wouldn't be perfectly round. That would cause problems when sizing.

[@GAURAVKUMAR-rd5ih]

Look handsome in beard ✌

[@larrykelley1818]

What is a rath ring burner ring sizer

[@CoinRingsfromTheMint]

+Larry Kelley A rathburn ring stretcher is a cheap hand held ring strtcher

[@montneymon-ta-knee6810]

hey bud I was wondering if you received the coins I sent you

[@montneymon-ta-knee6810]

my phone reset and I lost all contacts

[@CoinRingsfromTheMint]

contact me through my website with all your info and I can figure it out. www.changeyoucanwear.net

[@2all4god]

I thought it was a federal offence to deface a coin in any way?

[@CoinRingsfromTheMint]

Luckily as long as there is no fraudulent intent you are good to go.

[@levispicer7353]

Can you make a ring out of a dime

[@darrenmyhq7233]

Can you use a hammer

[@CoinRingsfromTheMint]

+Darren Myhq yes you can!

[@marcocueto]

spaniol mister please

[@davidrivera5114]

Awesome video bro like always keep it up. This video is very helpful just like all ur videos. Hope u and ur family are doing gd. Hit me up in an email sometimes be safe bro.

[@lidlid771]

หาชื่อจากไหน?????

[@joemax138]

Can write for mi all materials i will provide mail address.plz i would like to practice

[@user-lw7ff9li8u]

اگو عرب بالطياره 2019

[@demonlittlehorn1949]

er...i think I'm gonna need a raise in my allowance:-/

[@CoinRingsfromTheMint]

+Akasha Clanclan lol meet too!

[@Harborman253]

Basically, you say basically too much. Lol... Good video though. Thank you.

[@CoinRingsfromTheMint]

So basically you think it was good overall. Win :)

[@danteVEC725]

this sets cost thousand of dollar....