This NA Miata has a top that's seen better days. Let's take the old one off and install a fresh one. Really not too bad of a job. Just need some basic hand tools and a rivet gun.
Пікірлер: 22
@Buzz652 ай бұрын
We've watched about 10 different vids on Miata top replacement. This one is far and away the best. Thanks for the excellent vid.
@NotEnoughProjects2 ай бұрын
Glad it was helpful. Thank you!
@Otani_Garage5 ай бұрын
My soft top came with 0 instructions, and I’m putting an NB style glass window top on my NA so this is VERY helpful. Thank you so much!
@HardingTwentyNine10 ай бұрын
So far the best explanation with good video of every step. Thank you! This really helped me figure out what wasn't done correctly on the soft top and frame I bought for my 93 and will def help me get the other top on the frame for my 90!
@NotEnoughProjects10 ай бұрын
Awesome! Glad you found it helpful
@staceymorris502711 ай бұрын
Thank you for the video, Notenoughprojects. Very well done! I am not a Miata owner, but I am looking at one that needs a new top. I have watched probably at least a half dozen videos about how to replace the top and yours is by far the best one!
@NotEnoughProjects11 ай бұрын
Thank you! Glad you found it helpful 😀
@bessarion1771Ай бұрын
just be aware - it took my son and I 6.5 hrs to complete. It would have been 8 hours, but my son's friend who does canvass work on boats joined us with appropriate tools. In my opinion, two people are a minimum for this job - you do need 3-4 hands on occasion. The rivet holes will likely be too large after you overdrill old rivets, so I would suggest getting rivet backing (like small washers). Also, doing it on a hot day is a PITA, but it makes fabric much easier to stretch (and you will be stretching it). Finally, when replacing the 3-part rail in the back holding and stretching the fabric, start on one side and move across. DO NOT put in the side rails first - the middle part will not fit. Make sure you have this video on hand - there are a LOT of details you MUST get correctly; we had to refer to the videos at least 4 times during this job.
@ronaldbriones608510 ай бұрын
Love the video planning on replacing mine I was just wondering all I got rn for the replacement is a top rain rail and going to get a rivet gun but what size are the rivets plus anything else I need thank you !!
@NotEnoughProjects10 ай бұрын
The rivets are 4mm or 5/32 I belive. The only place you really need to rivet is to the b pillar. The rain rail is fine without rivets. Hope it goes smooth for you!
@homer416312 күн бұрын
Great video. I just installed my top this weekend and my configuration is the same as yours. NA with a NB top with a glass window. I didn’t know how to do the elastic so this video makes a lot of sense. What did you end up doing to make the elastic stay attached to the bows? Did the washers work?
@NotEnoughProjects9 күн бұрын
Sorry I'm just getting back to you on this. The elastic ended up pulling out. We have just been manually moving the bow into position before lowering the top. Coming up with a better method is on my list of things to do
@M.Reza200 Жыл бұрын
Hello, Alright, I have a question from Germany. I have an old miata and wanted to change the top. The screws in the rear area are rusted and unfortunately broken off. Do you maybe have an idea and thank you very much for your help and your great videos. Reza
@NotEnoughProjects Жыл бұрын
Which screws exactly are broken? The rain rail studs?
@M.Reza200 Жыл бұрын
@@NotEnoughProjects Many thanks for the answer. That's right. Rain rail bolts have broken off.
@NotEnoughProjects Жыл бұрын
If you only have one or two that broke you should be fine. If a bunch snapped then unfortunately the only real fix is to cut/drill them out and replace either with a bolt/nut or weld in new studs
@sorasoki5 ай бұрын
smooth
@3dragonprints4586 ай бұрын
anyone know if its easier to do it like this or removing the entire frame, i really havent done much work on any cars other than simple maintenance so dont have very much experience
@NotEnoughProjects6 ай бұрын
I've never found it worthwhile to remove the frame personally, but some people prefer to. Only tricky part is the lower b pillar screw but it is not too bad. Probably a toss up between the two methods, but frame removal seems like more work to me
@samanthaverhagen56110 ай бұрын
What top is this?
@NotEnoughProjects10 ай бұрын
Sorry I'm just seeing this. This top was from ebay seller morethantops. Pretty decent overall for the price. www.ebay.com/itm/295492587676