Completely Invisible railing joiner: The mind-blowing Lamello Invis

  Рет қаралды 11,705

Scott Earl Smith Finishing Touch Carpentry

Scott Earl Smith Finishing Touch Carpentry

Күн бұрын

Пікірлер: 32
@jayschuon8330
@jayschuon8330 11 ай бұрын
Scott , just finishing up an over the post railing on a winding staircase and balcony. I bought the Lamello invis mx2 system because you made a good case for it and I have to say, I couldn't be any happier !! What a time saver when assembling and dis assembling things to get the fit right. Fantastic!! Thanks for the info and keep up the good work, Jay
@scottearlsmithFTC
@scottearlsmithFTC 11 ай бұрын
That's good to hear Jay! I was doing a bunch of Invis connections today and fine tuning some of my techniques. Video coming shortly. Cheers, Scott
@jayschuon8330
@jayschuon8330 2 жыл бұрын
Have to get one for the next railing job! Fantastic. I remember seeing Tommy use this on this old house years ago. Keep up the good work !
@scottearlsmithFTC
@scottearlsmithFTC 2 жыл бұрын
Yes it is a great tool. Especially for a pro (like you). You can bill out the joining elements, which is a bonus. A few years ago I'd never heard about it. Then a commercial finisher told me about it and I checked it out. Well worth it. Thank you for the encouraging comment!
@bobmartin6055
@bobmartin6055 2 жыл бұрын
Mind blown!!! That is such a cool way to join railing Scott!! Thanks so much and as always, you’re video’s are always so informative! Take care, Bob
@scottearlsmithFTC
@scottearlsmithFTC 2 жыл бұрын
Thanks again Bob. I appreciate all the encouragement. Cheers Scott
@yvonboudreau3932
@yvonboudreau3932 2 жыл бұрын
It has been said that working with wood is not rocket science. Well this tool is sure bringing woodworking closer to the rocket science spectrum. LOL Love your channel, it is very informative.
@scottearlsmithFTC
@scottearlsmithFTC 2 жыл бұрын
Thanks Yvon! Yup that tool is off the charts.
@rodgerferguson5927
@rodgerferguson5927 2 жыл бұрын
I can see some applications for this tool. very interesting, thanks for sharing
@scottearlsmithFTC
@scottearlsmithFTC 2 жыл бұрын
Thanks Rodger. Yes it does for specific kinds of work.
@AdiGV
@AdiGV Ай бұрын
Why would you use the connector on a glued on joint? I would much better joins available for that. I see use where clean removal is required, not otherwise.
@scottearlsmithFTC
@scottearlsmithFTC Ай бұрын
I use the Invis on glued joints to hold the pieces together firmly while the glue sets. Very difficult to clamp two sections of railing together. Let me know the better joiners you use. I'm always looking for new solutions.
@tawficyakubu5116
@tawficyakubu5116 Жыл бұрын
please what is the name of the second machine you used to chip in the wood?
@scottearlsmithFTC
@scottearlsmithFTC Жыл бұрын
I believe what you are referring to is the Festool Domino XL 700. It's a great machine for making solid joinery. www.festoolcanada.com/search-results-page?keyword=domino%20xl
@zephyr1408
@zephyr1408 2 жыл бұрын
I really was shocked I never heard of this? However my question is do you use this much? Or it’s nice to have? Cost to buy also?
@scottearlsmithFTC
@scottearlsmithFTC 2 жыл бұрын
I use it on every railing job - especially on mitred handrails. I've also used it for railing to newel post connections. It's around $800+- (Canadian dollars). So it's expensive enough - but not crazy. Thanks for reaching out.
@mrmarkfive
@mrmarkfive Жыл бұрын
Great video. What type of stain are you using?
@scottearlsmithFTC
@scottearlsmithFTC Жыл бұрын
Thank you! I can't remember actually. When I get back to my shop I will look and see if I have more left and let you know. I use a professional paint shop to guide me towards the right products and they're awesome. Thank you for the comment. Cheers Scott
@gluteen5451
@gluteen5451 Жыл бұрын
how about magnetic 45 degree joint?
@scottearlsmithFTC
@scottearlsmithFTC Жыл бұрын
Yes as long as the material is deep enough to accommodate the fittings.
@ericberman4193
@ericberman4193 Жыл бұрын
Well, eleven anyway … good video, thanks for providing.
@scottearlsmithFTC
@scottearlsmithFTC Жыл бұрын
Hahaha. Good one! I'm an avid fisherman so I am prone to exaggeration! Thank you for the encouraging comment. Scott
@neilgibb5265
@neilgibb5265 11 ай бұрын
Nice, thanks
@scottearlsmithFTC
@scottearlsmithFTC 11 ай бұрын
You're welcome! Thanks for the comment, Scott
@To_Se_Drugoe
@To_Se_Drugoe Жыл бұрын
За подтягивания отдельный лайк! 👍👍👍💪
@scottearlsmithFTC
@scottearlsmithFTC Жыл бұрын
Haha. Glad you liked them!
@999Jigs
@999Jigs 2 жыл бұрын
The chin ups is what blew my mind !
@scottearlsmithFTC
@scottearlsmithFTC 2 жыл бұрын
Yes it's an amazing joinery system.
@ryanolden5304
@ryanolden5304 Жыл бұрын
Does this work on an inclined handrail? Like with 22.5° mitres?
@scottearlsmithFTC
@scottearlsmithFTC Жыл бұрын
Yes. I've done them on mitres and also where the railing meets the newel at the newel at the top of the stairs. Check out this video: kzbin.info/www/bejne/aqKcgoKKotyEp7M Cheers Scott!
@ryanolden5304
@ryanolden5304 Жыл бұрын
@scottearlsmithFTC Thank you so much for your response, Scott and I found your video a massive help. I will be using these fixings from now on for my oak handrails.
@scottearlsmithFTC
@scottearlsmithFTC Жыл бұрын
@@ryanolden5304 Thank you Ryan! I'm glad the video helped. Good luck with your work. Cheers Scott
Contoured Railing with Mitres and Ends
24:39
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 2,9 М.
Mitred Handrail: With amazing invisible joinery
19:17
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 35 М.
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
The Craziest Drill Attachment YOU WILL EVER SEE!
7:51
Tool Review Zone
Рет қаралды 14 М.
Was The Lamello Zeta Worth It??? $1600 Tool & $300 In Connectors for This Detail!!!
27:53
Insider Carpentry - Spencer Lewis
Рет қаралды 97 М.
This Silicone Trick Will Change the Way You Apply Silicone!
3:20
The Maker
Рет қаралды 11 МЛН
How to use threaded screw inserts in Hard wood
7:39
Jon Peters - Longview Woodworking
Рет қаралды 304 М.
Making a Railing Offset: the hardest task in a stair-builders life
11:25
Scott Earl Smith Finishing Touch Carpentry
Рет қаралды 10 М.
Lamello Lesson - Crown Moulding using the Zeta P2 and Tenso P-10
4:52
Lamello Zeta P2 With Exclusive Inside Look At Tenso and Clamex
6:59
Fine Line Joinery
Рет қаралды 6 М.
These were Stronger than I Expected! - Finally Making Progress!!
11:16
Finish Carpentry TV
Рет қаралды 329 М.
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН