Completely Rebuilding This 5.3L LS Engine From Top To Bottom!

[@myrmillionade3512]

As a 52 year old lady I would like to learn about motors and how they are in so I really appreciate your videos. Please keep it up. Maybe I can learn how to do my own repairs. lol. Why not?

[@theindustryfarm7405]

Yeahhh you’ll do it with that mentality. Since 2021 I’ve learned ALOT. Still have yet to crack into my first engine but this is probably the 500th video I’ve watched of several different engines. Gettin pretty confident

[@marcusjohnson6948]

Just take one apart. You got it​@@theindustryfarm7405

[@WhiskeyRiverRifleman]

Nice job I have rebuilt around 10 LS motors and you did this one perfect you are correct in everything you did

[@WhiskeyRiverRifleman]

@@marshallwilliams7468 What do you want to do with this vehicle?

[@deathmammal]

@@WhiskeyRiverRifleman I'm curious what the differences are, would you mind telling me? Thank you so much for your time!

[@ryanmunoz4006]

If u just want a decent stock engine you can just swap it but if you want it race ready or at all built for performance rebuild would be ideal

[@buddyrebel_Garcia]

I rebuilt my 5.3 with 140k miles on it. Replaced the piston rings, honed the cylinder walls, changed the valve springs on the head, cam bearings and main bearings. I didn't measure for clearance; LOL, I mean it was all stock. No issues at all, still running like new again. I did put a small cam, Chopacabra cam. That is all the mods it has along with airaid intake tube.

[@jonathonpuckett2185]

I’m mechanically inclined but have never built an engine or swapped one. Thank you for the quality videos man. I hope to start a build this year. Wish me luck 🤘🏻

[@tuckerschultz6876]

I went to college for automotive restoration and I spent a lot of time rebuilding engines and I’ve done over 10 cam and lifter jobs accompanied by oil pumps on LS engines and I’ve never heard of anyone aligning the oil pump until today. That is such an amazing idea. Thank you so much for this information

[@lordactive6090]

Bro this is one of the best LS rebuild videos I’ve seen never knew you could line up the oil pump haha dope man dope!

[@Abraham_R_]

First time rebuilding a 5.3 and Omg I’ve been stressing out with my pushrod length, I’ve watched many videos on it but you made it so much simpler! Thank you

[@austinniemela]

Sweet!! Glad I can help!

[@dandorris8531]

Looks nIce FYI per GM bulletin, those O2 rubber plugs where they meet the lifter valley cover. Pull them up add a bead of silicon around the meeting surface and push them back on. Helps prevent water intrusion in case of washing engine down the road or water splashing in from who knows what. Water running in from the back cowl and down on the intake manifold and finding its way down to the valley cover. Also if you are using a car water pump with truck accessories then just use ICT billet water pump spacer and it will all work.

[@richardwilkinson3594]

While it probably won't matter with your engine, something to pay attention to is the piston pin circlip position. You normally want the opening to be at a 12 or 6 o'clock position. This stops the circlip from compressing at higher rpm when the piston changes direction faster which, if the opening is in the 3 or 6 o'clock position, allows the circlip to compress and potentially unseat itself.

[@rxcalvosa]

I was cringing a little when you slid the con-rods down the bore. It's real easy to nick something on the way down, especially if you're a little shakey, like me. That's why I always put a little bit of neoprene tubing on the studs.

[@ColdWarVet607]

Nicely Done! Thank you. Adjustable piston compressors...Oh you got that right. I used one when I rebuilt my sons Mazda engine. They don't clamp circular and exactly as you said, flimsy sides, either the piston or the rings jamming on the deck. It was just 4 cyc's so I stuck with it, but never again. Rebuilding my Chevy 3800 engine and getting one from Summit. Buying a 2006 Silverado with a L33 I'll rebuild and will get one from Summit for that. Nicely Done, Very Nicely Done!

[@austinniemela]

Yes buy the good ring compressors!! Thank you!

[@murymih]

Pure genius..... quality videos.... professional editing.....M.I.T level engineering 👌👌👌

[@PFCYANEZ92]

Nice to see another TEKTON torque wrench out there, I have all sockets and impact sockets, wrenches a lot of tools from them, I’ve had everything about 6 years now

[@tradeMark182]

Austin is my fav pro builder , lets go AVR

[@stevendouglas6593]

Hey Austin, you could make your own line of tapered piston ring compressors if you had a 3D printer and sell them online. I love watching you work, you’re always so careful and precise.

[@austinniemela]

That’s a good idea!

[@raycleaningsolutions]

Just did the oil pan and main seal on mine. Fun seeing all the stuff I was just tearing into a few weeks ago

[@CDShawnsshop]

Im on my 1st LS run thru, thanks for the inspiration vid!

[@KH102695]

Nice work on that motor. That's the perfect motor for that Toyota.

[@2braincellsoutdoors152]

Just bought a $50 ls hoping to rebuild it and put it in my 01 durango thank you dor this video

[@quadracer567]

Your audio from the mic while you talk is really good 👍

[@fsu3784]

Is that a drive by wire? If so what wire harness did you go with?? Can find all kinds of drive by cable harnesses but not many drive by wire 😅

[@justincarney982]

Really nice build but the knock sensor harness runs through the driver side runners under the intake and the coolant temp sensor goes on front driver side head

[@tomsloger4073]

The LS in the FJ40 will be sweet ! All that power for that small body should make it haul ass.

[@trammellwilliams9433]

Great job guy. Two thumbs up. Thanks for making the video.

[@ronthompson2366]

Nice job. This is going to be a great little engine. Looking forward to seeing what's next. 😎 👍

[@murymih]

I love how americans call a V8 engine 'small' ..... your imagination however small is on steroids..... for us Africans, any 4 cylinder above 2.0 cubic litres Is quite big and thirsty......once its turbocharged we go nuts about it. Blame it on our English colonizers 🤣🤣🤣

[@allenhorne7032]

This is gonna be an awesome FJ Austin! I can't wait to see what you do to it next! Don't forget to get a Helix throttle body spacer for it as well!

[@thomasmurphy5906]

I don't know what happened, but I turned my head for a second and then when I turned back Austin's building a LS engine, pretty cool

[@downunderrottweilers9457]

Awesome clip. Please explain all steps and components for those kids starting out moving forward.these clips are college quality..

[@austinniemela]

Thank you!

[@shadow_wolf0840]

I want to learn the 5.3 vortex for the reason I had one and I didn’t know anything about that specific one so sadly had to get rid of so I took it to heart

[@xxihasxx]

You blew it man

[@subhijacoric8799]

great video. always happy when I see a new upload by Austin. Keep up the great work.

[@Z-Bart]

Nice air pump Man!

[@pukargurung4200]

You said you’ll keep it simple 😂 looks like it gonna be another crazy epic built again?

[@thomashopper3705]

Right😭😭

[@johnchase3059]

Just like his brother 😂

[@joem2829]

Austin have you thought about doing a first gen 4Runner? I am the original owner of an 86. It’s time for a new power plant and would love to do a V8 swap in it.

[@breward5742]

That instrumental around 18:33 was hard😂😂 I just made a whole rap song about Chevys and speed that quick

[@kamgatombou2795]

Awesome work

[@landcruiser80overland]

Great job mate, keep up the good work

[@davidbrown-55]

When getting an ls from a salvage yard would 100,000 mile engine be worth buying? My first build for a 55 Chevy swap. What do I look for? Thanks

[@jose043r]

Were the heads put on backwards on purpose? Coolant temp sensor typically goes on drivers side 21:40

[@351mod]

They’re interchangeable on direction

[@pawpatina]

9:57 thats small block timing. both dots should be at 12 oclock on each sprocket. you are at tdc #6

[@jacksonjennings212]

What’s the average price on rebuilding your motor like this?

[@sethgileau7159]

I see the notches on the lifter tray are facing up does it make a difference if they face up or down ?

[@alberrosales398]

Encanta la mecánica, me gustaría aprender ese oficio con cada uno de tus proyectos.... 👍

[@caseysiglin4979]

When you bought the longer head bolt pack, were the bolts way longer then the stock ones? I feel like the short pack isn’t long enough and the long ones were way too long. I have 862heads if it matters

[@richarcruz7843]

💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽that’s how u do things do it right or don’t do it at all keep grinding man💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽

[@pomnichowski]

good stuff! 🖐

[@hodarineph638]

Are the side bolts for the main caps torqued to the same spec as the main bolts?

[@dohmaster1]

what're you checking with the indicator on the crank? I'm very new to engine building

[@joshwhite3959]

lifter trays are backwards, good build.

[@Gearsandoil]

Is it running and how did the motor turn out?

[@BmoreFox]

3.800 ring compressor with 3.780 bore?

[@ssredd90]

How much did you spend on this engine rebuild ?

[@josephhall6244]

hi austin if u clock ur time from 3:35 to 3:45 and you will see white paper with instruction.. how u get that? where to look for? thanks.

[@mrm4155]

Doesnt .07=7/100ths of an inch not 7/1000ths?

[@stevendouglas6593]

7/ 100ths is 70/1000ths. The measurement he was adding was 70/1000ths.

[@mrm4155]

@@stevendouglas6593 gotcha, I must have misheard what he said

[@philmartin4863]

Great video Austin. Wanted to know what color did u paint your front cover ?

[@ericmausolf8682]

I have the same question. Outstanding video, professional and accurate. However, I would like to know paint and color you used for pan, timing cover and valve covers.

[@suzrtimm5930]

This was so cool 😎

[@jigsawinventions]

What rebuild book would you recommend to complete a job like this?

[@daytondavee995]

What’s was that he switched at the 19:30 mark

[@professionalsinprogress]

Should it not have been minus 70 on the pushrod length?

[@idontknowsh..8612]

What’s was the foot pounds on the engine side bolts?

[@chadrichardson411]

What torque spec on the small outside main bolts

[@strawspy6776]

How long did this take ?

[@jeffcurrie123]

You reused the cap and rod bolts?

[@damienwilson6610]

I'm learning. What was the gauge that was put on the crank?

[@austinniemela]

Mag base dial indicator! Measuring the crack movement front to back!

[@armandomorales242]

@@austinniemelathat’s the only part I was completely I felt in the dark in watching this video. Could you explain more ? What does it do and what is it for

[@BansheeBridage]

Narrowed tons and coilovers?? Can't wait to see what's next.

[@chrissantiago405]

What kind of injectors u used and did the o ring came with it

[@victorcuevas4059]

Can u share the all data info for that specific engine please

[@biglon74]

move those stupid knock sensor to an alter location with re-location kit so you won't have to ever remove intake to get at them because water got in and rusted them.

[@mikebrossoit6597]

How much did this entire build cost

[@geauxnationwrld]

How much do you charge to rebuild?

[@giovannyruiz2121]

I got the same bolts for the heads can i know what longer bolts you got

[@frankyfrank6387]

That ring compressor # is it for stock piston and ring size ? I would love to order one im redoing the stock rings on my 5.3 soon

[@sillygily4435]

Whats the tool you’re using at 3:47 and what are doing with it?

[@guadalupeperezjr8614]

What did you torque the heads to?

[@Dtxmundo]

What brand gaskets did you use

[@austinniemela]

Mostly OEM gaskets!!

[@TyroneShoolaces-f8e]

how EASY is it to fit TURBO UNDER A GBODY HOOD? i just swapped in a 5.3 LS to my 85 cutlass a few yrs ago. its mostly running 100% except a p0154 code for 02 sensor and still gets 19 mpg city despite running open loop because of this, probly cuz i dont abuse it or get obnoxious on the gas cuz i have a very loud rumbling exhaust and ESPECIALLY 2.23 rear gears. BUT it barely lay a patch off the line cuz of those gears :-( in other words it needs either more power or 3.53 rearend which will also require a OD tranny too Anew rearend setup and tranny will likely cost me from 1500-3000 bucks canadain. can i turbo this for cheaper and fit under stock hood?

[@zackmyers2922]

Is there a torque spec for the side main cap bolts?

[@nestorvizcarra5101]

What part number are the head bolts you got?

[@joseph9100]

Where did you find the torque specs?

[@christopherhernandez9115]

What brand u get the rear cover and front cover gaskets ?

[@crestflock]

We’re did you get the rebuild kit?

[@justinclark3649]

I’m guessing this is a gen 3 ?

[@curtisrutledge424]

@19:30 what part is it that he replaced before putting on the timing cover? Thank you in advance to anyone who helps

[@austinniemela]

That’s a billet oil diverter barbell

[@Sniperssx]

how to till engine size also how tell is LS1 or 3

[@therrinchisley7600]

What pistons u went with

[@chrissantiago405]

What timing chain u used

[@juanruiz4635]

@Austin Niemela los diferenciales de la yukon serían Perfecto para el fj💪🏼💪🏼👌🏽💯

[@legozombiemocmaker8026]

What year motor is it

[@mikemoreno7329]

So it’s 65 foot pounds on the inners and outer main cap

[@bryonaderhold2009]

How much to do this

[@Coiks1]

Nice 👍🤘🏆🏆🏆

[@masonite1973]

Incompletely rebuilding this 5.3 LS from most of the top to bottom

[@MrJay-kb8xj]

Funny this guy looks like the KZbinr Devin Niemela.

[@austinniemela]

That’s my brother 🤘

[@MrJay-kb8xj]

@@austinniemela well aren’t I late to the party. Content is so familiar too. Clean and organized for sure. I can see it now for sure!! New sub here.

[@austinniemela]

@@MrJay-kb8xj awesome thanks man!!

[@haydendenard2693]

You could bring me a 5.3 block and all the parts and bolts in a 5 gallon bucket and I could put it together blind drunk I hope you can put it back together its easier to me than a small block Chevy

[@Artoconnell]

I get told all the time. LM7 is not an LS engine. I try to ask why they say that but never get an answer.

[@davefury66]

Let's go🔥😎

[@davefury66]

Great EP 🤙🏼

[@sharifahmed550]

Hi bro

[@TCKBUBBA]

Kirk cousins look alike

[@cj599]

what happened to your brothers vids?

[@elymc1133]

You think I could do this in my living room