Concentric Reducer Fabrication Template (how to build a cone)

[@dennispittman4555]

Thanks for the video... makes my fabrication much easier

[@sarmantech]

VERY NICE. your video is so easy to understand. i learnt another method of fabrication. Thanks.

[@TECHNICALPIPING]

welcome...

[@fuxluck1]

Out of all the videos on KZbin about this, you said nothing but explained more than any of them! Thank You.

[@JasonSpasoff]

Thank you for this video! Very easy to follow and translate into AutoCad!

[@jbaker8871]

Great job no bs nailed it!!

[@buddydog1956]

Good music ~ and good demonstration as well ~

[@philliparudolph9595]

thank you soooooooo much, I've been looking for this method for months

[@KrishnaKumar-me3wt]

hahaha......

[@ramaiahmuthupandi1188]

Thank you so much , just easy to learn this videos

[@ramaiahmuthupandi1188]

please demonstrate 90 degree elbow ( Radius 210 & 5 section )

[@sivatejaaddala6186]

superb bro,i been searching for a while,,thanqqqq bro,keep it up

[@sivatejaaddala6186]

@Jeremy Kenneth did it worked

[@mudlakesawmill9332]

Thank you Its so simple and easy

[@kailas170]

this is very good vedio tutorial Thanks

[@jamesnasmith984]

Nice demonstration. PS: 1.5” is 38mm and 4” is 101.6mm

[@iconenterprises5900]

very usefull. thank you

[@cherrysolomon8889]

You are the only who knows what you doing no explanation? God damm it

[@hagensteele4447]

This video makes me want to punch the guy that originally taught me how to do this in the head, as your method is FAR superior. Thanks for the upload.

[@CR-zc4bc]

Video clip so good...and i have a question why we dividing by 12

[@renatanirman194]

What happens if we divide the length of circumference by 2 in case of twelve?

[@kanireddykumar9140]

Nice video frind

[@ajitmohanty168]

Nice.. 👌👌👌

[@haranadhss3132]

Super video sir 😀

[@SadikKhan-zu7ug]

Why you divided the circumference by 12

[@Chris-adams-rc-journey]

For ease of measuring a curved line. Without the use of string or wire to lay along the line. The more you divide it, the more accurate it is. It's like messing a curved line with small straight sections.

[@iceyaj3167]

confusing. where did you get 12?

[@nnnitis]

I didn't understand after 29.8 mm came what you did after that? Please explain

[@farmtoflameenergy]

May I please ask where you got the pencil protractor from. Mine cannot do such a wide angle as seen in 1:45

[@TECHNICALPIPING]

In Stationery shop only..

[@farmtoflameenergy]

@@TECHNICALPIPING thank you kindly

[@hareramprajapati813]

very nice

[@spanxplays1290]

thank you for the rejuice:)

[@RajeshKumar-cw8wb]

Nice sir

[@אביבןחמואחלההסבר-פשוטלעניין]

so simple

[@UdayKumar-qk8st]

Thanks for massage

[@donnysajan8627]

Why we divide by 12..? Can we divide by any other number

[@harimohansharma]

What is the maximum size of cone will be fabricated from 2 nos 1250mm x 2500mm metal sheet ?

[@Tomsoffroadandcustom]

Thank you

[@vsujithnarayan]

Super

[@itssandesh_0171]

Same formula would mein banane ka kaise banega

[@AsokVisva22]

Thanks a lot

[@neelendrapandey3360]

How can you know cut to division by divider because of is round u cut division state

[@murthydaarapureddy6956]

Thanks bro

[@itssandesh_0171]

Same formula wooden mein banana rahega to kaise banega

[@chandanyadov3607]

Jhakas

[@travelertui5609]

1"=25.4 How 4" = 114mm ?

[@singhsainigagan3079]

same doubt

[@TECHNICALPIPING]

As per pipe std(ASME) dimensions

[@davetickner7302]

What about a tapper. With a 45 degree Y branch take off. Say 8" to 12" on centre tapper With 8" 45 degree Y branch.

[@recepgun8692]

thanks for sharing :) i did nt get how to calculate "H" and is there any standart for this calculations ? ( especially EN )

[@mushtaqmirza9390]

good job i have a question why 258÷12

[@giruchavadallavar8764]

Can we get eccentric reducer fabrication template.

[@rvshungama8684]

NIce One

[@jaimecalero6938]

Excelente como hago para conseguir un libro donde se explique mejor paso a paso

[@iftekharalam82]

Eccentric reducer needed

[@bigrockets]

how do you get 114mm out of 4 inches, and 48mm out of 1.5"? Your math is haywire, but the rest of the video is good

[@rajangupta7921]

Nice looking

[@Z750Kawasaki]

Tnx ☺

[@skmontu5299]

Something is learning

[@kadiransari4107]

How did you get 102mm

[@bembem311]

Its the given height... 😊

[@mohdafak7877]

Nice

[@saketmishra3854]

Esme division kya liye h 12

[@vijaysekaran7061]

BIG DIA 250MM, SMALL DIA 252MM CAN YOU MAKE. YOUR VIDEO IS NOT SUITABLE FOR MY DIMENSION

[@jogendrarout5867]

Bhai jiska dia 5mtr/1mtr. Height 6mtr ho kese part part mn karein.

[@mirajiew4944]

how take Height any Reducer Please Describe

[@jana-sundaram]

plz demonstrate 90 degree elbow making..

[@TECHNICALPIPING]

watch this video:Layout and Development of 90 degree elbow miter bend kzbin.info/www/bejne/gZbNamuKnpWhp8U

[@rogelioramos9437]

Excelente. Máster. No podrías realizar. En. Tuberia. Gracias. Saludos desde veracruz ok

[@amolghagare3439]

Tq sir

[@Ashokjssaten]

Why you just divide the circumference in to only 12 parts

[@jvsnewproduction4419]

I want drawing of dai 3.2meter to 4meter how to draw please send me

[@rajendrakolikoli2310]

Ecentriy reducer kaise bhany

[@rajesh.v.brajesh5914]

I want to marking ofpipe

[@chiku36]

It doesn't look like both dia matches to 48mm and 114mm Plz check it again

[@rajendrakolikoli2310]

Tanc kaise bany video send carona

[@chiku36]

Its more than 120mm

[@quality_handicrafts_trophy8587]

What about the height 102mm? Height will be not 102mm after cutting the paper!! Sorry it's ok! Thanks finally.😂

[@anjanisah705]

Bachha vala con hai y to top daya 3500,bottom daya 2500 high state 4000 mm ka video all size mm me hai

[@mirajiew4944]

And also make Eccentric Reducer

[@mosokat5160]

Hai

[@TECHNICALPIPING]

Hi

[@toivoshatimwene9182]

You are just doing your things and you re not explaining.. And the way you re noting is not clear.. Just didn't get any thing... Hope you will try something clear now

[@אביבןחמואחלההסבר-פשוטלעניין]

very good

[@TECHNICALPIPING]

Thanks

[@mushtaqmirza9390]

good job i have a question why 358÷12

[@Tonys_Podium]

Mushtaq Mirza it's a shortcut to mark out the approximate circumference while minimising error. It would be more accurate to calculate the actual width of the chord. Try this online calculator/app: www.handymath.com/cgi-bin/onlinearcapp8.cgi?submit=Entry

[@mushtaqmirza9390]

FIREHAWK1979 thank you very much it is very helpful for me

[@Tonys_Podium]

Mushtaq Mirza here is an app that gives you all the measurements: cone calculator by Hasan Ramadan appsto.re/gb/6BTpab.i

[@ryushinosuke9912]

ummmm...sorry for the noob question, is it always divided by 12?

[@muhammadimrandaya9800]

Very nice