FOREVER No-Cut Transfer Paper - Tips and Tricks

[@screenofhouse]

That's a professional video!!! Good explanation how to do it. I am beginner from Holland with a lot of open minded ideas. thanks a lot!!

[@condesystems]

Thank you so much fro your kind words! Please let us know if you have any questions to help you out along your sublimation journey.

[@ronhawks1277]

This was the best video for information I've seen. Good job.

[@condesystems]

Glad you enjoyed it! Thank you for watching! If you have any questions, please contact us directly at [e-mail]

[@yvonnedugbazah141]

Great video. Thanks so much for sharing. I'm new to this. Can I use inkjet or sublimation printer? I'm using both cotton and 100% polyester shirts.

[@condesystems]

Hello Yvonne, Forever no-cut transfer paper only works with toner based printers.

[@wisdomunderstanding9078]

Great video! I have faith in Forever again, I cant wait to try these techniques

[@TheWorldisSoDivided]

Great video.

[@condesystems]

Glad you enjoyed it

[@aliciamando]

Very informative.. great video

[@condesystems]

Thank you!

[@coolpetworld]

great video FOREVER . where i can get that materiel : print and paper

[@scottfraze7743]

So do you use a sublimation printer for this process?

[@lawandahodges3002]

Great vid! Chris explained things very clearly.

[@jonathanjaca5778]

Is it compatible to any lazer copier

[@melatmekonen2909]

What do you put the top of the clear paper can u please tell me the name of it please. The two papers the one you put on it.

[@condesystems]

Are you talking about the finishing sheet that they use after the apply the material to the garment? If so, you can find it here dyetrans.com/details.php?item_no=SS8511XXV

[@11retodd]

When printing with an OKI C711WT Printer, using Forever Laser Dark Transfer paper on an all white design, I am getting a distressed look when I peel off the heat transfer from a 100% Cotton shirt. Sometimes it is ruing the design in that a big chunk of the design/lettering comes off, and thus ruining the shirt. I am super cautious pulling it off, just as outlined in your video. I feel maybe it was a setting issue when I printed the design initially or a setting issue in the RIP software?? I would like the design to be a solid white, not a distressed looking white. I am using the RIP software and had initially configured as outlined in your videos. Any suggestions?

[@condesystems]

Hello R Todd! Thank you for watching our Video. For best assistance, please contact our technical support at [e-mail].

[@antoniaclanton7332]

Can you use sublimation ink?

[@teeteebrown4565]

What is the paper call that you guys using ?

[@condesystems]

Forever No-cut transfer paper

[@daan3967]

My print on on the a sheet from the printer isn't as solid as yours. It has some freckles with less color on it. But i have got a good laser printer. Is it maybe a problem that the printer hasn't got a transparent paper setting?

[@condesystems]

Hello Daan, we are sorry to hear that you are having an issue with your printing. For the best support, please contact or techincal support team at [e-mail].

[@condesystems]

Your "freckles" issue could be related to humidity. Make sure your operating environment is between 40% - 60% RH for best results. This issue could also be related to media type/media weight setting or a bad image drum (if using an LED-based printer). If a transparency setting is not an option, then select thick or heavy stock media. As long as toner is bonded to the page after printing, you should be good to proceed to the marrying/weeding step of the process.

[@chrluc]

A really great video!

[@sniedrich]

Thank you for this support ;)

[@condesystems]

Any time! Please let us know if you have any questions.

[@gorgeland2008]

What happens if I peal hot??

[@rodiron]

how do we prevent glue inside of transfer sheet. Sometimes I get small spots of glue around image.

[@condesystems]

If excess emulsion appears (spots around the design), it usually means you are using too much heat or pressure. Try reducing your press temperature 10-degrees first. If emulsion dots still appear, then reduce heat press pressure by 1/2 turn or 5-10 psi.

[@rodiron]

@@condesystems Thank you!

[@lon3-iu4ci]

Please What forever transfer paper can i use with any laser printer ?

[@condesystems]

Here is a link to FOREVER Paper with a list of transfer paper products that can be used with a standard, 4-color (CMYK) laser printer: www.forever-ots.com/product-category/transfer-media/laser-printers/

[@darrellhawkins9706]

can you still print white with forever dark and without white toner?

[@condesystems]

You can produce a "white only" design with FOREVER Laser Dark (No-Cut) LowTemp paper. However, you use a White Toner printer and you must physically print white in order to transfer the design. Here is a related video that explains the process: kzbin.info/www/bejne/bmiWnGuOlqyDfrM

[@TEESCOTT333]

Thank you for this video! I may have missed it but what pressure number is your geo knight on for full color? What number for all white? I want to try it using the same pressure.

[@condesystems]

Hello TNTV Crafts! Our pressure settings for this materiel can be found at the following link. dyetrans.com/search.php?search=forever

[@TEESCOTT333]

Thank you so much!

[@911token]

what kind of paper are you using both papper

[@condesystems]

Forever No-cut transfer papers

[@kaylacorbin6413]

For 100%polyester what settings would I use?

[@condesystems]

Heat Press setting should be between 250-265(F) for 30 seconds with medium pressure. Remember to allow the A-foil sheet to cool before removing.

[@inspyre.design]

Any trick to remove a print from a garment?

[@condesystems]

Contact us at [e-mail] :)

[@ispearo]

What a very helpful vid.....Brilliant.....Thanks....Nige UK

[@stephenhenderson4372]

I am a beginner how do get all colours with white

[@condesystems]

This printing is done with a "White Toner" color laser printer. These printers use white poly toner as the "last color down" to create an underbase white for transfer paper printing to dark-colored fabrics. If artwork is designed correctly and raster image processing (RIP) program is used, then white can be both an underbase and spot color. Popular models for this process include the OKI C711WT, OKI Pro8432WT and OKI Pro9541WT printers.

[@zak4853]

will it work with inkjet printer ??

[@condesystems]

No Forever No-Cut Transfer paper is only recommended for white toner printers.

[@MsWearer]

Hi I recently bought some Koala heat transfer paper from Amazon thinking I could start printing from my Epson Stylus R3000 and I had to cut around the image. It looked so unprofessional. Once I heat pressed it and then I had to put it in the wash it came out all ripped and screwed up! Can you tell me how to create a heat transfer at home but one that I can sell? Do I need special inks? The paper you’re selling is definitely on my list.

[@condesystems]

Hello Ms Weaver, thank you for watching our video. Forever No-Cut transfer paper requires a white toner printer. Here is a link to the models that we sell ----> dyetrans.com/products.php?webmaincat=laser_printer&websubcat=printer&websubcat2=oki&websubcat3=c711wt If you have questins please contact us at [phone] or [e-mail]

[@janiew48]

Are you putting this on cotton shirts?

[@condesystems]

Hello and thank you for your question! Forever no - cut transfer paper does work on cotton shirts and is most likely what they are using in the video.

[@bibasingh8289]

What kind of printer do we need for this transfer sheet??

[@condesystems]

Hello Biba! Please visit the following link to see the type of printer we recommend for the Forever No-Cut Transfer. dyetrans.com/products.php?webmaincat=laser_printer&websubcat=printer&websubcat2=oki&websubcat3=c711wt

[@samjap]

Do I need white toner printer to print white design?

[@leahkimberly-lowe270]

Sam yes

[@kaileefleming5760]

Where can I get this paperrrrrrrrr

[@condesystems]

You can find all the products used in this video on our website at dyetrans.com/index.php

[@ysaraflores]

where can i get this paper

[@condesystems]

Hello Sara! Thank you for your interest in our Forever No Cut transfer paper. You can get your here...dyetrans.com/details.php?item_no=LLT-8511C

[@davidsamuels6734]

Good, Good video

[@deltafusioncloggers8907]

Not sure why this transfer paper does not work for me.

[@condesystems]

Please contact our technical support at [e-mail].