Condor LCS Gun Belt: What Size Should I Get

[@zekeanderson5684]

Thanks for the in depth video. You saved me from buying and returning a belt that was to big

[@jimhovater8755]

I have 2 of these belts for myself (BLK and FDE/COYOTE). I have a 36 waist. The MEDIUM sized belt fits perfectly, with about 6-inches of room left for adjustment. My wife is a Size 0-4. She had the SMALL belt. It barely has enough 'take up' in it to fit her properly.

[@ihatenewyork]

Nice job. Thank you for the clarifications.

[@sebbe636]

Thank you for this video! absolute life saver. I was struggling finding sizing for this specific belt aswell. With a 38.5'' waist i decided to go with the size M/L.

[@ReadyWorkman]

Glad to hear, I know the video was really in depth as far as all the measurements but it was everything I couldn’t fine.

[@BangBang-hk4rg]

Thanks so much for this video! 👍

[@tony7106]

Very useful info! Thanks bud!

[@bigoz7]

Great video very informative and thanks for sharing!

[@bored1832]

wondering if u can show a tutorial on how to replace the buckle with a 3rd party one?

[@DeesulDaddy]

How did you adjust the belt? I can’t seem to figure it out the Velcro goes too low and it doesn’t latch the belt fully

[@TacticalDisciple295]

Good Morning Srodfire, I trust you are well & Happy New Year! Sorry, I just wanted to confirm. If I take the measuring tape and wrap it over my current EDC belt it measures at 42-43 Inches... Would you go Medium or Large? Take it easy & God bless, From South Africa

[@ReadyWorkman]

I’d go with the medium sir, it should fit up to 45 1/4 inch waist so at 42/43 you’re golden.

[@TacticalDisciple295]

@@ReadyWorkman Thanks brother! Appreciate it!

[@JDavidFall]

Hey man question for you about the buckle. If you have time. Did you like it? Did it hold Up? Also did you order the male adjustable and female fixed? I can’t tell which is which. Thanks In Advance

[@ReadyWorkman]

I did like it, I switched to a metal cobra for the tie in point. I will get back to you on the buckle setup… no prob

[@KingTheDetailer]

The outer belt is 2" right ? You think I can slap that on a edc belt that has velcro on the outside of it. Think that will work ?

[@ReadyWorkman]

Sorry for the late response, Yes though, as long as your edc belt has the hook part on its exterior as the lcs belt has the loop(soft side) on the inside.

[@TimWolffe]

How do you secure the padded inner belt to your body?

[@ReadyWorkman]

So the inner belt has the loop material on its outside which attaches to the actual belt, and a really grippy rubberized texture on its inside which grabs onto your body. You could also buy a separate belt that’ll fit through your loops on your pants that has the loop material on it’s outside from a number of other companies, and it’ll work with the Outer belt.

[@joshuawong8882]

Just measured my waist. I am 33inch waist. Which belt size do you recommend? I want to have a good fit and also adjust if need to make tighter or looser. I will also be using my own inner belt.

[@ReadyWorkman]

I’d go with a small sir.

[@bradgargan5055]

Gooday. Thanks for your video. I am stuck between sizes and am worried if I get the medium it won't be able adjust small enough and if I get the small that it won't adjust big enough. I wear a size 34 pants and If I measure around my belt it measures between 36.5 to 37.75inch depending on which belt I use. I will be wearing the condor belt using the padded inner belt. What are your thoughts? Small or medium.? Thanks.

[@ReadyWorkman]

Standby

[@ReadyWorkman]

I’m in the works of getting someone with a 34pants size to try for size.

[@kylefuller3312]

when you installed the new buckle did you have to permanently modify the belt in any way? looking to put a buckle with a D ring on one of these

[@ReadyWorkman]

No the belt can be easily reversed, it’s as simple as undoing the hook and loop “Velcro”, slide and whatever buckle you want on there on either end and restrapping the hook and loop. It’s a great bill call mom very sturdy it’s taking me about nine months to get it set up the way I want it, but I’ve been hiking with it lately and it’s working out great. I’ll have to do an updated video.

[@kylefuller3312]

@@ReadyWorkman awesome, thanks boss! would love to see an update after some extended use!

[@ReadyWorkman]

@@kylefuller3312 yessir, I appreciate that man! Update coming soon…

[@lui_lui4988]

I just mesured myself again, I'm abt a size 36'' shoud i get the small or medium??

[@ReadyWorkman]

Pant size 36 to 42 inch get a medium. If you measure your waist at your pant line and you were 36” that means your pant size is closer to 34 and I’d go with a small.

[@hayman1222]

I'm 14 and super duper skinny like skin and bones, and I am wondering if I should get a small and made it large or a medium and make it the smallest. Can you help me out?

[@ReadyWorkman]

I’d say the size Small should fit down to a size 30” waist -ish… possible a 28” . If I was a size 34 pants or under I’d get the small.

[@hayman1222]

@@ReadyWorkman got it👍 thanks for the help bro you get a sub for that.

[@cesaro.l.4406]

how wide is the "inner belt"?

[@ReadyWorkman]

It is 2 5/8” wide, and the outer is 2”

[@cesaro.l.4406]

Thank you very much

[@terrinewman7390]

what's up the the gloves?

[@ReadyWorkman]

I like the the gloves

[@JDavidFall]

Because gloves are sweet 🧤

[@Think_4_yourself_plz]

I actually stopped buying CONDOR, and I'm steadily selling what I have by them. Quite simply because they're manufactured in China

[@ReadyWorkman]

I like to support USA made where I can, … but question- are you telling me you do not own anything “made in china” ? If you draw a hard line you have to walk a hard line.

[@JDavidFall]

@@ReadyWorkmanhaha right. Better get rid of 94% of the stuff in your house